By Associate Professor Rukmi Dutta

Conference Papers

Rahman A; Dutta R; Chu G; Xiao D; Gao M; Rahman MF, 2023, 'Analysis of Zero Sequence Current in an Open Winding Permanent Magnet Synchronous Machine Under Rotor Magnet Fault Condition', in 2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023, pp. 5321 - 5328, http://dx.doi.org/10.1109/ECCE53617.2023.10362902

Gao M; Chu G; Dutta R; Rahman A, 2023, 'Improved Deadtime Compensation Method Considering Currrent Ripple', in 2023 IEEE International Conference on Energy Technologies for Future Grids, ETFG 2023, http://dx.doi.org/10.1109/ETFG55873.2023.10408393

Gao M; Chu G; Dutta R; Rahman A; Xiao D, 2023, 'Improvement of Inductance Measurement of IPMSM', in 2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023, pp. 4302 - 4307, http://dx.doi.org/10.1109/ECCE53617.2023.10362093

Rahman A; Dutta R; Chu G; Xiao D; Gao M; Rahman MF, 2023, 'Suppression Analysis of Zero-sequence Current Under Magnet Fault in an Open-winding Permanent Magnet Synchronous Machine', in 2023 IEEE International Conference on Energy Technologies for Future Grids, ETFG 2023, http://dx.doi.org/10.1109/ETFG55873.2023.10408221

Jing B; Dutta R; Rahman MF; Xiao D, 2022, 'Evaluation of an isolated and modular Bi-directional Power Converter for Charging Battery/Ultra-Capacitors for EV', in 2022 IEEE 7th Southern Power Electronics Conference, SPEC 2022, http://dx.doi.org/10.1109/SPEC55080.2022.10058062

Gao M; Chu G; Dutta R; Xiao D, 2022, 'Loss Analysis of a High-Speed IPMSM using Different Trajectory Control', in 2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022, http://dx.doi.org/10.1109/ECCE50734.2022.9947821

Shakib SMSI; Xiao D; Dutta R; Rahman MF, 2022, 'Online Deadbeat Predictive Direct Torque and Active Flux Control for IPMSM Drive', in 2022 International Power Electronics Conference, IPEC-Himeji 2022-ECCE Asia, pp. 2479 - 2483, http://dx.doi.org/10.23919/IPEC-Himeji2022-ECCE53331.2022.9806977

Rahman A; Xiao D; Chu G; Dutta R; Rahman MF, 2022, 'Performance analysis of MPC-based Zero Sequence Current Controllers in an Open- Winding PMSM', in 2022 IEEE 7th Southern Power Electronics Conference, SPEC 2022, http://dx.doi.org/10.1109/SPEC55080.2022.10058305

Showybul Islam Shakib SM; Xiao D; Dutta R; Rahman MF, 2021, 'Deadbeat Predictive Direct Torque and Active Flux Control with Disturbance Observer', in IECON Proceedings (Industrial Electronics Conference), http://dx.doi.org/10.1109/IECON48115.2021.9589079

Chu G; Dutta R; Fletcher J; Lovatt H; Rahman MF, 2021, 'Analytical Calculation of the Mechanical Stress on IPMSM Bridges with Decomposition of the Centrifugal Force', in 2021 IEEE Energy Conversion Congress and Exposition, ECCE 2021 - Proceedings, pp. 4639 - 4645, http://dx.doi.org/10.1109/ECCE47101.2021.9595665

Chu G; Lovatt H; Rahman MF; Dutta R, 2020, 'Comparative Analysis of Different Halbach Array Structures in the Design Optimization of an In-wheel Permanent Magnet Machine for Land Speed Racing', in ECCE 2020 - IEEE Energy Conversion Congress and Exposition, pp. 1800 - 1805, http://dx.doi.org/10.1109/ECCE44975.2020.9235827

Zhang R; Zhang D; Dutta R, 2019, 'Study on PCB Based Litz Wire Applications for Air-Core Inductor and Planar Transformer', in 2019 9th International Conference on Power and Energy Systems, ICPES 2019, http://dx.doi.org/10.1109/ICPES47639.2019.9105549

Chu G; Pouramin A; Dutta R; Rahman MF; Lovatt H; Sarlioglu B, 2019, 'A new mechanical-strength-oriented rotor parametric model design for the optimization of a very-high-speed IPMSM', in 2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019, pp. 6092 - 6098, http://dx.doi.org/10.1109/ECCE.2019.8912980

Showybul Islam Shakib SM; Xiao D; Dutta R; Alam KS; Osman I; Rahman MF, 2019, 'An improved modulated model predictive torque and flux control for high-speed IPMSM drives', in 2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019, pp. 6601 - 6607, http://dx.doi.org/10.1109/ECCE.2019.8913018

Showvbul Islam Shakib SM; Xiao D; Dutta R; Alam KS; Osman I; Rahman MF; Akter MP, 2019, 'An Analytical Approach to Direct Torque and Flux Control of Interior Permanent Magnet Synchronous Machine for Deep Field Weakening Without Using Pre-calculated Lookup Tables', in ICPE 2019 - ECCE Asia - 10th International Conference on Power Electronics - ECCE Asia, Busan, Korea, pp. 3196 - 3202, presented at ICPE, Busan, Korea, 27 May 2019 - 30 May 2019

Chu G; Dutta R; Lovatt H; Sarlioglu B; Rahman MF, 2018, 'Analytical Calculation of Maximum Mechanical Stress on the Rotor of the Interior Permanent-Magnet Synchronous Machine', in 2018 IEEE Energy Conversion Congress and Exposition, ECCE 2018, pp. 255 - 261, http://dx.doi.org/10.1109/ECCE.2018.8557418

Pouramin A; Dutta R; Rahman MF, 2018, 'Design Optimization of a Spoke-Type FSCW IPM Machine to Achieve Low Torque Ripple and High Torque Density under a Wide Constant Power Speed Range', in 2018 IEEE Energy Conversion Congress and Exposition, ECCE 2018, pp. 6914 - 6921, http://dx.doi.org/10.1109/ECCE.2018.8558066

Zhang R; Zhang D; Dutta R, 2018, 'Study on core loss reduction in the transformer of isolated DC/DC converter with series L-C and resonant L-C shunt filter', in Australasian Universities Power Engineering Conference, AUPEC 2018, http://dx.doi.org/10.1109/AUPEC.2018.8757908

Chu G; Dutta R; Rahman MF, 2018, 'Investigation of the Stress Concentration Factor for Estimating Maximum Mechanical Stress of Interior Permanent-Magnet Machines', in Proceedings - 2018 23rd International Conference on Electrical Machines, ICEM 2018, pp. 798 - 804, http://dx.doi.org/10.1109/ICELMACH.2018.8507225

Ekanayake S; Dutta R; Rahman F; Xuan BM, 2018, 'Position Sensorless Control of an Interior Permanent Magnet Synchronous Machine (IPMSM) in Deep Flux-weakening Region', in 2018 IEEE 9th International Symposium on Sensorless Control for Electrical Drives, SLED 2018, pp. 114 - 119, http://dx.doi.org/10.1109/SLED.2018.8486136

Pouramin A; Dutta R; Rahman MF, 2017, 'Challenges of considering saliency ratio in design optimization of IPM machines', in Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, pp. 1828 - 1833, http://dx.doi.org/10.1109/IECON.2017.8216309

Pouramin A; Dutta R; Rahman MF, 2017, 'Preliminary study on differences in the performance characteristics of concentrated and distributed winding IPM machines with different rotor topologies', in 2017 IEEE Energy Conversion Congress and Exposition, ECCE 2017, Cincinnati, OH, USA, pp. 3565 - 3570, presented at 2017 IEEE Energy Conversion Congress and Exposition (ECCE), Cincinnati, OH, USA, 01 October 2017 - 05 October 2017, http://dx.doi.org/10.1109/ECCE.2017.8096634

Farshadnia M; Pouramin A; Dutta R; Fletcher JE, 2017, 'Airgap magnetic field estimation for IPM rotors considering their non-uniform local saturation', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, Australia, 11 August 2017 - 14 August 2017, http://dx.doi.org/10.1109/ICEMS.2017.8056266

Li J; Ekanayake S; Rahman MF; Dutta R; Huang X; Ma J; Fang Y, 2017, 'Deep flux weakening control with six-step overmodulation for a segmented interior permanent magnet synchronous motor', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, Australia, 11 August 2017 - 14 August 2017, http://dx.doi.org/10.1109/ICEMS.2017.8056517

Ekanayake S; Dutta R; Xiao D; Rahman MF, 2017, 'Direct torque and flux control of a fractional-slot concentrated-winding IPMSM in deep flux-weakening region', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, Australia, 11 August 2017 - 14 August 2017, http://dx.doi.org/10.1109/ICEMS.2017.8056372

Rathnayake RMHM; Dutta R; Fletcher JE; Xiao D, 2017, 'Torque ripple minimization of an IPMSG with fractional-slot, concentrated-winding using uncontrolled rectifier-connected boost converter control', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, Australia, 11 August 2017 - 14 August 2017, http://dx.doi.org/10.1109/ICEMS.2017.8056212

Pouramin A; Farshadnia M; Dutta R; Rahman MF, 2017, 'Tradeoffs in high-speed performance characteristics in optimization of saliency ratio and efficiency for designing FSCW IPM machines', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, Australia, 11 August 2017 - 14 August 2017, http://dx.doi.org/10.1109/ICEMS.2017.8056386

Pouramin A; Ekanayake S; Dutta R; Rahman MF, 2017, 'Challenges for including characteristic current as a design parameter in optimization of IPM machines', in 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017, Miami, FL, USA, presented at 2017 IEEE International Electric Machines and Drives Conference (IEMDC), Miami, FL, USA, 21 May 2017 - 24 May 2017, http://dx.doi.org/10.1109/IEMDC.2017.8002184

Ekanayake S; Pouramin A; Dutta R; Rahman MF, 2017, 'Verification of a novel voltage control strategy for MTPV control of a fractional-slot concentrated-winding IPMSM', in 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017, Miami, FL, USA, presented at 2017 IEEE International Electric Machines and Drives Conference (IEMDC), Miami, FL, USA, 21 May 2017 - 24 May 2017, http://dx.doi.org/10.1109/IEMDC.2017.8001867

Ahsanullah K; Dutta R; Rahman F, 2017, 'Analysis of low-speed IPMMs with distributed and fractional slot concentrated windings designed for wind energy applications', in 2017 IEEE International Magnetics Conference, INTERMAG 2017, Dublin, Ireland, presented at 2017 IEEE International Magnetics Conference (INTERMAG), Dublin, Ireland, 24 April 2017 - 28 April 2017, http://dx.doi.org/10.1109/INTMAG.2017.8008036

Priestley M; Xiao D; Said NAM; Dutta R; Fletcher JE, 2016, 'Post-fault control strategy for IPMSMs with non-sinusoidal back-EMFs in an open-ended winding configuration', in IECON Proceedings (Industrial Electronics Conference), pp. 2879 - 2884, http://dx.doi.org/10.1109/IECON.2016.7793768

Rathnayake RMHM; Dutta R; Fletcher JE; Xiao D; Ekanayake S, 2016, 'Power and voltage control of a nonpitchable direct driven fractional slot concentrated wound-IPMSG based wind turbine operating above base speed', in IECON Proceedings (Industrial Electronics Conference), pp. 1961 - 1966, http://dx.doi.org/10.1109/IECON.2016.7793453

Mohd Said NA; Priestley M; Dutta R; Fletcher JE, 2016, 'Torque ripple minimization in dual inverter open-end winding PMSM drives with non-sinusoidal back-EMFs by harmonic current suppression', in IECON Proceedings (Industrial Electronics Conference), pp. 2975 - 2980, http://dx.doi.org/10.1109/IECON.2016.7793479

Alshibani S; Dutta R; Agelidis VG, 2016, 'Optimization of a MW Halbach PMSG for wind turbine applications', in Proceedings - 2016 22nd International Conference on Electrical Machines, ICEM 2016, pp. 1963 - 1969, http://dx.doi.org/10.1109/ICELMACH.2016.7732792

Ekanayake S; Dutta R; Rahman MF; Rathnayake RMHM, 2016, 'A modified single-current-regulator control scheme for deep flux-weakening operation of interior permanent magnet synchronous motors', in IECON Proceedings (Industrial Electronics Conference), IEEE, Florence, Italy, pp. 2624 - 2629, presented at IECON 2016 - 42nd Annual Conference, Florence, Italy, 23 October 2016 - 26 October 2016, http://dx.doi.org/10.1109/IECON.2016.7793424

Alshibani S; Dutta R; Agelidis V, 2016, 'Effect of eliminating rotor iron on a mega-watt halbach permanent magnet synchronous generator for wind turbine applications', in IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society, IEEE, presented at IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society, 23 October 2016 - 26 October 2016, http://dx.doi.org/10.1109/iecon.2016.7887896

Farshadnia M; Cheema M; Dutta R; Fletcher J; Rahman FM, 2016, 'Detailed analytical modelling of fractional-slot concentrated-wound interior permanent magnet machines for prediction of torque ripple', in Energy Conversion Congress and Exposition (ECCE), 2016 IEEE, IEEE, Milwaukee, WI, pp. 1 - 8, presented at 2016 IEEE Energy Conversion Congress and Exposition (ECCE), Milwaukee, WI, 18 September 2016 - 22 September 2016, http://dx.doi.org/10.1109/ecce.2016.7855035

Rathnayake RMHM; Dutta R; Fletcher JE, 2016, 'Control of direct driven fractional slot concentrated wound-IPMSG for variable speed wind energy system', in Proceedings - 2016 22nd International Conference on Electrical Machines, ICEM 2016, IEEE, Lausanne, SWITZERLAND, pp. 1001 - 1007, presented at 22nd International Conference on Electrical Machines (ICEM), Lausanne, SWITZERLAND, 04 September 2016 - 07 September 2016, http://dx.doi.org/10.1109/ICELMACH.2016.7732648

Farshadnia M; Cheema MAM; Dutta R; Fletcher JE, 2016, 'Analytical modeling of pulsating torque in concentrated-wound interior permanent magnet machines to achieve maximum average torque under an open-phase fault condition', in 2016 IEEE 8th International Power Electronics and Motion Control Conference, IPEMC-ECCE Asia 2016, IEEE, Hefei, China, pp. 2813 - 2819, presented at 2016 IEEE 8th International Power Electronics and Motion Control Conference (IPEMC-ECCE Asia), Hefei, China, 22 May 2016 - 26 May 2016, http://dx.doi.org/10.1109/IPEMC.2016.7512743

Farshadnia M; Cheema MAM; Dutta R; Fletcher JE; Lovatt HC; Rahman MF; Rahman F, 2016, 'An extended dq model for concentrated-wound interior permanent magnet machines considering non-ideal machine parameters', in IET Conference Publications, Institution of Engineering and Technology (IET), Glasgow, UK, pp. 6 .-6 ., presented at 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016), Glasgow, UK, 19 April 2016 - 21 April 2016, http://dx.doi.org/10.1049/cp.2016.0180

Mohd Said NA; Xiao D; Dutta R; Fletcher JE, 2016, 'Control strategy of post-fault operation in dual inverter-fed, PMSM considering zero sequence and back-emf harmonic', in IET Conference Publications, Glasgow, UK, presented at 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016), Glasgow, UK, 19 April 2016 - 21 April 2016, http://dx.doi.org/10.1049/cp.2016.0228

Ekanayake S; Dutta R; Rahman MF; Xiao D; Fletcher J; Rahman F, 2016, 'Operation along the maximum torque per voltage trajectory in a direct torque and flux controlled interior permanent magnet synchronous motor', in IET Conference Publications, Institution of Engineering and Technology (IET), pp. 6 .-6 ., presented at 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016), http://dx.doi.org/10.1049/cp.2016.0326

Rathnayake R; Dutta R; Fletcher J; Xiao D, 2015, 'Modified efficiency optimization control for fractional slot concentrated wound interior permanent magnet synchronous generators', IEEE, Yokohama, Japan, pp. 002986 - 002991, presented at 41st Annual Conference of the IEEE Industrial Electronics Society, IECON 2015, Yokohama, Japan, 09 November 2015 - 12 November 2016, http://dx.doi.org/10.1109/IECON.2015.7392557

Farshadnia M; Cheema M; Dutta R; Fletcher J; Rahman F, 2015, 'Anomalies in experimental measurement of operational inductances of a concentrated-wound IPM machine under field-weakening region', IEEE, Yokohama, Japan, pp. 004880 - 004885, presented at 41st Annual Conference of the IEEE Industrial Electronics Society, IECON 2015, Yokohama, Japan, 09 November 2015 - 12 November 2015, http://dx.doi.org/10.1109/IECON.2015.7392865

Mohd Said N; Xiao D; Dutta R; Fletcher J, 2015, 'Closed-loop control strategy for PM machines with non-sinusoidal back-EMFs using dual-inverter open-end winding', IEEE, Yokohama, Japan, pp. 002998 - 003003, presented at 41st Annual Conference of the IEEE Industrial Electronics Society, IECON 2015, Yokohama, Japan, 09 November 2015 - 12 November 2015, http://dx.doi.org/10.1109/IECON.2015.7392559

Ekanayake S; Dutta R; Rahman F; Xiao D, 2015, 'Deep flux weakening control of a segmented interior permanent magnet synchronous motor with maximum torque per voltage control', IEEE, Yokohama, Japan, pp. 004802 - 004807, presented at 41st Annual Conference of the IEEE Industrial Electronics Society, IECON 2015, Yokohama, Japan, 09 November 2015 - 12 November 2015, http://dx.doi.org/10.1109/IECON.2015.7392851

Pouraminaein A; Dutta R; Rahman F; Xiao D, 2015, 'Inductances of a fractional-slot concentrated-winding interior PM synchronous machine considering effects of saturation and cross magnetization', IEEE, Montreal, QC, pp. 6075 - 6081, presented at 2015 IEEE Energy Conversion Congress and Exposition (ECCE), Montreal, QC, 20 September 2015 - 24 September 2015, http://dx.doi.org/10.1109/ECCE.2015.7310511

Pouramin A; Dutta R; Rahman MF; Fletcher JE; Xiao D, 2015, 'A preliminary study of the effect of saturation and cross-magnetization on the inductances of a fractional-slot concentrated-wound interior PM synchronous machine', in Proceedings of the International Conference on Power Electronics and Drive Systems, pp. 828 - 833, http://dx.doi.org/10.1109/PEDS.2015.7203522

Rathnayake RMHM; Dutta R; Fletcher JE; Ahsanullah K; Xiao D, 2015, 'Efficiency analysis of a 42- pole/54-slot fractional-slot concentrated-wound interior permanent magnet synchronous machine', in Proceedings of the International Conference on Power Electronics and Drive Systems, pp. 1041 - 1046, http://dx.doi.org/10.1109/PEDS.2015.7203472

Farshadnia M; Dutta R; Fletcher JE; Ahsanullah K; Rahman MF; Lovatt HC, 2014, 'Analysis of MMF and back-EMF waveforms for fractional-slot concentrated-wound permanent magnet machines', in Proceedings - 2014 International Conference on Electrical Machines, ICEM 2014, pp. 1976 - 1982, http://dx.doi.org/10.1109/ICELMACH.2014.6960455

Back to profile page