By Dr Nima Haghdadi

Journal articles

Haghdadi N; Zarei-Hanzaki A; Kawasaki M; Phillion AB; Hodgson PD, 2017, 'Effect of Severe Plastic Deformation and Subsequent Silicon Spheroidizing Treatment on the Microstructure and Mechanical Properties of an Al–Si–Mg Alloy', Advanced Engineering Materials, 19, http://dx.doi.org/10.1002/adem.201700064

Haghdadi N; Abou-Ras D; Cizek P; Hodgson PD; Rollett AD; Beladi H, 2017, 'Austenite-ferrite interface crystallography dependence of sigma phase precipitation using the five-parameter characterization approach', Materials Letters, 196, pp. 264 - 268, http://dx.doi.org/10.1016/j.matlet.2017.03.090

Haghdadi N; Cizek P; Beladi H; Hodgson PD, 2017, 'The austenite microstructure evolution in a duplex stainless steel subjected to hot deformation', Philosophical Magazine, 97, pp. 1209 - 1237, http://dx.doi.org/10.1080/14786435.2017.1293860

Haghdadi N; Cizek P; Beladi H; Hodgson PD, 2017, 'A novel high-strain-rate ferrite dynamic softening mechanism facilitated by the interphase in the austenite/ferrite microstructure', Acta Materialia, 126, pp. 44 - 57, http://dx.doi.org/10.1016/j.actamat.2016.12.045

Abedi HR; Hanzaki AZ; Haghdadi N; Hodgson PD, 2017, 'Substructure induced twinning in low density steel', Scripta Materialia, 128, pp. 69 - 73, http://dx.doi.org/10.1016/j.scriptamat.2016.10.001

Abedi HR; Zarei Hanzaki A; Liu Z; Xin R; Haghdadi N; Hodgson PD, 2017, 'Continuous dynamic recrystallization in low density steel', Materials and Design, 114, pp. 55 - 64, http://dx.doi.org/10.1016/j.matdes.2016.10.044

Haghdadi N; Martin D; Hodgson P, 2016, 'Physically-based constitutive modelling of hot deformation behavior in a LDX 2101 duplex stainless steel', Materials and Design, 106, pp. 420 - 427, http://dx.doi.org/10.1016/j.matdes.2016.05.118

Haghdadi N; Zarei-Hanzaki A; Abedi HR; Abou-Ras D; Kawasaki M; Zhilyaev AP, 2016, 'Evolution of microstructure and mechanical properties in a hypoeutectic Al-Si-Mg alloy processed by accumulative back extrusion', Materials Science and Engineering: A, 651, pp. 269 - 279, http://dx.doi.org/10.1016/j.msea.2015.10.066

Abedi HR; Zarei-Hanzaki A; Karimi E; Haghdadi N, 2015, 'The Shear Punch Jump Test—a Novel Application of a Small Specimen Testing Technique for Rapid Evaluation of Deformation Mechanisms', Experimental Mechanics, 55, pp. 1569 - 1573, http://dx.doi.org/10.1007/s11340-015-0064-7

Razmpoosh MH; Zarei-Hanzaki A; Haghdadi N; Cho JH; Kim WJ; Heshmati-Manesh S, 2015, 'Thermal stability of an ultrafine-grained dual phase TWIP steel', Materials Science and Engineering: A, 638, pp. 5 - 14, http://dx.doi.org/10.1016/j.msea.2015.03.066

Haghdadi N; Phillion AB; Maijer DM, 2015, 'Microstructure Characterization and Thermal Analysis of Aluminum Alloy B206 During Solidification', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 46, pp. 2073 - 2081, http://dx.doi.org/10.1007/s11661-015-2780-0

Jamaly N; Haghdadi N; Phillion AB, 2015, 'Microstructure, Macrosegregation, and Thermal Analysis of Direct Chill Cast AA5182 Aluminum Alloy', Journal of Materials Engineering and Performance, 24, pp. 2067 - 2073, http://dx.doi.org/10.1007/s11665-015-1480-7

Abbasi-Bani A; Zarei-Hanzaki A; Pishbin MH; Haghdadi N, 2014, 'A comparative study on the capability of Johnson-Cook and Arrhenius-type constitutive equations to describe the flow behavior of Mg-6Al-1Zn alloy', Mechanics of Materials, 71, pp. 52 - 61, http://dx.doi.org/10.1016/j.mechmat.2013.12.001

Haghdadi N; Zarei-Hanzaki A; Abou-Ras D; Maghsoudi MH; Ghorbani A; Kawasaki M, 2014, 'An investigation into the homogeneity of microstructure, strain pattern and hardness of pure aluminum processed by accumulative back extrusion', Materials Science and Engineering: A, 595, pp. 179 - 187, http://dx.doi.org/10.1016/j.msea.2013.11.077

Mirzaei A; Zarei-Hanzaki A; Haghdadi N; Marandi A, 2014, 'Constitutive description of high temperature flow behavior of Sanicro-28 super-austenitic stainless steel', Materials Science and Engineering A, 589, pp. 76 - 82, http://dx.doi.org/10.1016/j.msea.2013.09.036

Haghdadi N; Zarei-Hanzaki A; Abou-Ras D, 2013, 'Microstructure and mechanical properties of commercially pure aluminum processed by accumulative back extrusion', Materials Science and Engineering: A, 584, pp. 73 - 81, http://dx.doi.org/10.1016/j.msea.2013.06.060

Haghdadi N; Zarei-Hanzaki A; Khalesian AR; Abedi HR, 2013, 'Artificial neural network modeling to predict the hot deformation behavior of an A356 aluminum alloy', Materials and Design, 49, pp. 386 - 391, http://dx.doi.org/10.1016/j.matdes.2012.12.082

Haghdadi N; Zarei-Hanzaki A; Roostaei AA; Hemmati AR, 2013, 'Evaluating the mechanical properties of a thermomechanically processed unmodified A356 Al alloy employing shear punch testing method', Materials and Design, 43, pp. 419 - 425, http://dx.doi.org/10.1016/j.matdes.2012.07.001

Haghdadi N; Zarei-Hanzaki A; Heshmati-Manesh S; Abedi HR; Hassas-Irani SB, 2013, 'The semisolid microstructural evolution of a severely deformed A356 aluminum alloy', Materials and Design, 49, pp. 878 - 887, http://dx.doi.org/10.1016/j.matdes.2013.02.051

Marandi A; Zarei-Hanzaki A; Haghdadi N; Eskandari M, 2012, 'The prediction of hot deformation behavior in Fe-21Mn-2.5Si-1.5Al transformation-twinning induced plasticity steel', Materials Science and Engineering: A, 554, pp. 72 - 78, http://dx.doi.org/10.1016/j.msea.2012.06.014

Haghdadi N; Bazaz B; Erfanian-Naziftoosi HR; Kiani-Rashid AR, 2012, 'Microstructural and mechanical characteristics of Al-alloyed ductile iron upon casting and annealing', International Journal of Minerals, Metallurgy and Materials, 19, pp. 812 - 820, http://dx.doi.org/10.1007/s12613-012-0633-z

Erfanian-Naziftoosi HR; Haghdadi N; Kiani-Rashid AR, 2012, 'The effect of isothermal heat treatment time on the microstructure and properties of 2.11% Al austempered ductile iron', Journal of Materials Engineering and Performance, 21, pp. 1785 - 1792, http://dx.doi.org/10.1007/s11665-011-0086-y

Haghdadi N; Zarei-Hanzaki A; Abedi HR; Sabokpa O, 2012, 'The effect of thermomechanical parameters on the eutectic silicon characteristics in a non-modified cast A356 aluminum alloy', Materials Science and Engineering: A, 549, pp. 93 - 99, http://dx.doi.org/10.1016/j.msea.2012.04.010

Rokni MR; Zarei-Hanzaki A; Abedi HR; Haghdadi N, 2012, 'Microstructure evolution and mechanical properties of backward thixoextruded 7075 aluminum alloy', Materials and Design, 36, pp. 557 - 563, http://dx.doi.org/10.1016/j.matdes.2011.11.061

Haghdadi N; Zarei-Hanzaki A; Abedi HR, 2012, 'The flow behavior modeling of cast A356 aluminum alloy at elevated temperatures considering the effect of strain', Materials Science and Engineering: A, 535, pp. 252 - 257, http://dx.doi.org/10.1016/j.msea.2011.12.076

Sabokpa O; Zarei-Hanzaki A; Abedi HR; Haghdadi N, 2012, 'Artificial neural network modeling to predict the high temperature flow behavior of an AZ81 magnesium alloy', Materials and Design, 39, pp. 390 - 396, http://dx.doi.org/10.1016/j.matdes.2012.03.002

Back to profile page