Select Publications
Journal articles
2015, 'Effect of freeboard deflectors on the temperature distribution in packed beds', Applied Thermal Engineering, 89, pp. 134 - 143, http://dx.doi.org/10.1016/j.applthermaleng.2015.05.045
,2015, 'On numerical study of calcium sulphate fouling under sub-cooled flow boiling conditions', Applied Thermal Engineering, 81, pp. 18 - 27, http://dx.doi.org/10.1016/j.applthermaleng.2015.01.079
,2015, 'Effectiveness of microbubble removal in an airtrap with a free surface interface', Journal of Biomechanics, 48, pp. 1237 - 1240, http://dx.doi.org/10.1016/j.jbiomech.2015.03.018
,2015, 'Erratum: Outside back cover (volume 15, issue 21) (Lab on a Chip - Miniaturisation for Chemistry and Biology (2015) 15 (4234))', Lab on a Chip, 15, pp. 4627, http://dx.doi.org/10.1039/c5lc90125a
,2015, 'Flow-induced stress on adherent cells in microfluidic devices', Lab on a Chip, 15, pp. 4114 - 4127, http://dx.doi.org/10.1039/c5lc00633c
,2015, 'Numerical study of bubbly flow using the second-order moment turbulence model and the population balance method', Numerical Heat Transfer; Part A: Applications, 68, pp. 1220 - 1241, http://dx.doi.org/10.1080/10407782.2015.1037154
,2014, 'Transient analysis of a single rising bubble used for numerical validation for multiphase flow', Chemical Engineering Science, 112, pp. 25 - 34, http://dx.doi.org/10.1016/j.ces.2014.02.027
,2014, 'Data mining on fire records of New South Wales, Sydney', Procedia Engineering, 71, pp. 328 - 332, http://dx.doi.org/10.1016/j.proeng.2014.04.047
,2014, 'Development of wall-adapting local eddy viscosity model for study of fire dynamics in a large compartment', Applied Mechanics and Materials, 444-445, pp. 1579 - 1591, http://dx.doi.org/10.4028/www.scientific.net/AMM.444-445.1579
,2014, 'Fire scene investigation of an arson fire incident using computational fluid dynamics based fire simulation', Building Simulation, 7, pp. 477 - 487, http://dx.doi.org/10.1007/s12273-014-0164-9
,2014, 'Fire scene reconstruction of a furnished compartment room in a house fire', Case Studies in Fire Safety, 1, pp. 29 - 35, http://dx.doi.org/10.1016/j.csfs.2014.01.001
,2014, 'Numerical simulation of gas-particle ows over an in-line tube bank', ANZIAM Journal, 48, pp. C509 - C526
,2014, 'Modeling subcooled flow boiling in vertical channels at low pressures – Part 1: Assessment of empirical correlations', International Journal of Heat and Mass Transfer, 75, pp. 736 - 753, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2014.03.016
,2014, 'Modeling subcooled flow boiling in vertical channels at low pressures – Part 2: Evaluation of mechanistic approach', International Journal of Heat and Mass Transfer, 75, pp. 754 - 768, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2014.03.017
,2014, 'Multiphase Flow System with Suspended Particles', Advances in Mechanical Engineering, 2014, pp. 1 - 2, http://dx.doi.org/10.1155/2014/792050
,2014, 'On DEM-CFD study of the dynamic characteristics of high speed micro-abrasive air jet', Powder Technology, 267, pp. 161 - 179, http://dx.doi.org/10.1016/j.powtec.2014.07.018
,2013, 'Numerical simulation of an enclosure fire in a large test hall', Computational Thermal Sciences, 5, pp. 459 - 471, http://dx.doi.org/10.1615/ComputThermalScien.2013005954
,2013, 'Modeling of bubble size distribution in isothermal gas-liquid flows: Numerical assessment of population balance approaches', Nuclear Engineering and Design, 265, pp. 120 - 136, http://dx.doi.org/10.1016/j.nucengdes.2013.08.049
,2013, 'Capturing coalescence and break-up processes in vertical gas-liquid flows: Assessment of population balance methods', Applied Mathematical Modelling, 37, pp. 8557 - 8577, http://dx.doi.org/10.1016/j.apm.2013.03.063
,2013, 'Numerical simulation of a ceiling jet fire in a large compartment', Procedia Engineering, 52, pp. 3 - 12, http://dx.doi.org/10.1016/j.proeng.2013.02.097
,2013, 'Two-dimensional computational analysis of microbubbles in hemodialysis', Artificial Organs, 37, http://dx.doi.org/10.1111/aor.12110
,2013, 'A novel polyurethane prepolymer as toughening agent: Preparation, characterization, and its influence on mechanical and flame retardant properties of phenolic foam', Journal of Applied Polymer Science, 128, pp. 2720 - 2728, http://dx.doi.org/10.1002/app.38399
,2013, 'Application of an Efficient Moving-Grid Methodology to Model a Synthetic Jet', Advances in Mathematical and Computational Methods, 3, pp. 41 - 49, http://www.ier-institute.org/2160-0635.html
,2013, 'Capturing coalescence and break-up processes in vertical gas-liquid flows: Assessment of population balance methods', Applied Mathematical Modelling, http://dx.doi.org/10.1016/j.apm.2013.03.063
,2013, 'Comparison of the VOF and CLSVOF methods in interface capturing of a rising bubble', The Journal of Computational Multiphase Flows, 5, pp. 43 - 56, http://dx.doi.org/10.1260/1757-482X.5.1.43
,2013, 'Experimental Investigation and Control of Magnetorheological Damper towards Smart Energy Absorption based Composite Structures for Crashworthiness', Journal of Multifunctional Composites, 1
,2013, 'Large-eddy simulation of turbulent buoyancy-driven flow in a rectangular cavity', International Journal of Heat and Fluid Flow, 39, pp. 28 - 41, http://dx.doi.org/10.1016/j.ijheatfluidflow.2012.10.003
,2013, 'Mechanical and thermal properties of phenolic/glass fiber foam modified with phosphorus-containing polyurethane prepolymer', Polymer International, 62, pp. 273 - 279, http://dx.doi.org/10.1002/pi.4296
,2013, 'Preparation of UV-curable functionalized graphene/polyurethane acrylate nanocomposite with enhanced thermal and mechanical behaviors', Reactive and Functional Polymers, 73, pp. 854 - 858, http://dx.doi.org/10.1016/j.reactfunctpolym.2013.03.003
,2012, 'Forced convection in micro-channel with synthetic jet: Effect of operating frequency', ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012, pp. 257 - 266, http://dx.doi.org/10.1115/ICNMM2012-73020
,2012, 'Modelling isothermal bubbly-cap flows using two-group averaged bubble number density approach', AIP Conference Proceedings, 1479, pp. 117 - 120, http://dx.doi.org/10.1063/1.4756076
,2012, 'Preface to special issue - Part 2 of selected contributions from 14 th International Topical Meeting on Nuclear Reactor Thermal hydraulics NURETH-14 in Toronto', Journal of Computational Multiphase Flows, 4, http://dx.doi.org/10.1260/1757-482X.4.4.i
,2012, 'Challenges in the modeling of soot for buoyant-driven fires', , pp. 209 - 242
,2012, 'Preface to Special Issue-Part i of selected contributions from 14th International Topical Meeting on Nuclear Reactor Thermal hydraulics NURETH-14 in Toronto', Journal of Computational Multiphase Flows, 4, http://dx.doi.org/10.1260/1757-482X.4.3.i
,2012, 'Erratum: Three-dimensional modelling of fluid flow and heat transfer in micro-channels with synthetic jet (International Journal of Heat and Mass Transfer (2012) 55 (198-213))', International Journal of Heat and Mass Transfer, 55, pp. 2746, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2012.01.022
,2012, 'Computational fluid dynamics and its applications 2012', Modelling and Simulation in Engineering, 2012, http://dx.doi.org/10.1155/2012/610610
,2012, 'Modeling vertical subcooled boiling flows at low pressures', ASTM Special Technical Publication, 1534, pp. 349 - 375, http://dx.doi.org/10.1520/stp49345t
,2012, 'Application of dynamic global-coefficient subgrid-scale models to turbulent natural convection in an enclosed tall cavity', Physics of Fluids, 24, pp. 094105-1 - 094105-24, http://dx.doi.org/10.1063/1.4753944
,2012, 'Classification of bubbles in vertical gas-liquid flow: Part 1 - An analysis of experimental data', International Journal of Multiphase Flow, 39, pp. 121 - 134, http://dx.doi.org/10.1016/j.ijmultiphaseflow.2011.10.010
,2012, 'Classification of bubbles in vertical gas-liquid flow: Part 2 - A model evaluation', International Journal of Multiphase Flow, 39, pp. 135 - 147, http://dx.doi.org/10.1016/j.ijmultiphaseflow.2011.10.009
,2012, 'Fabrication and characterization of graphene-reinforced waterborne polyurethane nanocomposite coatings by the sol-gel method', Surface and Coatings Technology, 206, pp. 4778 - 4784, http://dx.doi.org/10.1016/j.surfcoat.2012.03.077
,2012, 'Flow structure generated by two synthetic jets in a channel: Effect of phase and frequency', Sensors and Actuators A - Physical, 184, pp. 96 - 111, http://dx.doi.org/10.1016/j.sna.2012.07.014
,2012, 'Large-eddy simulation of natural convection in an asymmetrically-heated vertical parallel-plate channel: Assessment of subgrid-scale models', Computers and Fluids, 59, pp. 101 - 116, http://dx.doi.org/10.1016/j.compfluid.2012.01.006
,2012, 'Modelling of natural convection in vertical and tilted photovoltaic applications', Energy and Buildings, 55, pp. 810 - 822, http://www.sciencedirect.com/science/article/pii/S0378778812005233
,2012, 'Numerical investigation of passive cooling in open vertical channels', Applied Thermal Engineering, 39, pp. 121 - 131, http://dx.doi.org/10.1016/j.applthermaleng.2012.01.001
,2012, 'On the prediction of bubble size distribution and void fraction in vertical gas-liquid flows', The Journal of Computational Multiphase Flows, 4, pp. 1 - 22, http://dx.doi.org/10.1260/1757-482X.4.1.1
,2012, 'On the prediction of the phase distribution of bubbly flow in a horizontal pipe', Chemical Engineering Research and Design : Official Journal of the European Federation of Chemical Engineering: Part A, 90, pp. 40 - 51, http://dx.doi.org/10.1016/j.cherd.2011.08.004
,2012, 'Simulation of blood flow and nanoparticle transport in a stenosed carotid bifurcation and pseudo-arteriole.', The Journal of Computational Multiphase Flows, 4, pp. 83 - 102, http://dx.doi.org/10.1260/1757-482X.4.1.85
,2012, 'Study of isothermal vertical bubbly flow using direct quadrature method of moments', The Journal of Computational Multiphase Flows, 4, pp. 23 - 40, http://dx.doi.org/10.1260/1757-482X.4.1.23
,2012, 'Three-dimensional modelling of fluid flow and heat transfer in micro-channels with synthetic jet', International Journal of Heat and Mass Transfer, 55, pp. 198 - 213, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2011.09.003
,