Select Publications

Journal articles

Zhang R; Huang C; Wang J; Feng S; Zhu H, 2021, 'Evolution of micro/nano-structural arrays on crystalline silicon carbide by femtosecond laser ablation', Materials Science in Semiconductor Processing, vol. 121, http://dx.doi.org/10.1016/j.mssp.2020.105299

Tangwarodomnukun V; Wang J; Huang CZ; Zhu HT, 2020, 'Corrigendum to “Heating and material removal process in hybrid laser-waterjet ablation of silicon substrates” [Int. J. Mach. Tool Manufact. 79 (2014) 1–16] (International Journal of Machine Tools and Manufacture (2014) 79 (1–16), (S0890695513001995), (10.1016/j.ijmachtools.2013.12.003))', International Journal of Machine Tools and Manufacture, vol. 159, http://dx.doi.org/10.1016/j.ijmachtools.2020.103638

Niu J; Huang C; Li C; Zou B; Xu L; Wang J; Liu Z, 2020, 'A comprehensive method for selecting cutting tool materials', International Journal of Advanced Manufacturing Technology, vol. 110, pp. 229 - 240, http://dx.doi.org/10.1007/s00170-020-05534-0

Xu L; Huang C; Li C; Wang J; Liu H; Wang X, 2020, 'A novel intelligent reasoning system to estimate energy consumption and optimize cutting parameters toward sustainable machining', Journal of Cleaner Production, vol. 261, http://dx.doi.org/10.1016/j.jclepro.2020.121160

Abbas CA; Huang C; Wang J; Wang Z; Liu H; Zhu H, 2020, 'Machinability investigations on high-speed drilling of aluminum reinforced with silicon carbide metal matrix composites', International Journal of Advanced Manufacturing Technology, vol. 108, pp. 1601 - 1611, http://dx.doi.org/10.1007/s00170-020-05409-4

Zhao B; Liu H; Wang J; Huang C; Zhu H; Liu X, 2020, 'Influence of novel sintering process on the densification and microstructures of ceramic composite materials', Ceramics International, vol. 46, pp. 6733 - 6737, http://dx.doi.org/10.1016/j.ceramint.2019.11.162

Liu D; Nguyen T; Wang J; Huang C, 2020, 'Mechanisms of enhancing the machining performance in micro abrasive waterjet drilling of hard and brittle materials by vibration assistance', International Journal of Machine Tools and Manufacture, vol. 151, http://dx.doi.org/10.1016/j.ijmachtools.2020.103528

Zhang Z; Yao P; Li X; Wang J; Huang C; Zhu H; Zou B; Liu H, 2020, 'Grinding performance and tribological behavior in solid lubricant assisted grinding of glass-ceramics', Journal of Manufacturing Processes, vol. 51, pp. 31 - 43, http://dx.doi.org/10.1016/j.jmapro.2020.01.020

Xu L; Huang C; Li C; Wang J; Liu H; Wang X, 2020, 'An improved case based reasoning method and its application in estimation of surface quality toward intelligent machining', Journal of Intelligent Manufacturing, http://dx.doi.org/10.1007/s10845-020-01573-2

Feng S; Zhang R; Huang C; Wang J; Jia Z; Wang J, 2020, 'An investigation of recast behavior in laser ablation of 4H-silicon carbide wafer', Materials Science in Semiconductor Processing, vol. 105, http://dx.doi.org/10.1016/j.mssp.2019.104701

Xu L; Huang C; Li C; Wang J; Liu H; Wang X, 2020, 'Estimation of tool wear and optimization of cutting parameters based on novel ANFIS-PSO method toward intelligent machining', Journal of Intelligent Manufacturing, http://dx.doi.org/10.1007/s10845-020-01559-0

Xu L; Huang C; Li C; Wang J; Liu H; Wang X, 2020, 'Prediction of tool wear width size and optimization of cutting parameters in milling process using novel ANFIS-PSO method', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, http://dx.doi.org/10.1177/0954405420935262

Zhang C; Zhu H; Jiang Z; Huang C; Wang J, 2020, 'Removal mechanism and surface quality of crystal semiconductor materials in scratching tests with Berkovich indenter', Materials Science in Semiconductor Processing, vol. 105, http://dx.doi.org/10.1016/j.mssp.2019.104746

Thongkaew K; Wang J; Yeoh G, 2019, 'Impact characteristics and stagnation formation on a solid surface by a supersonic abrasive waterjet', International Journal of Extreme Manufacturing, http://dx.doi.org/10.1088/2631-7990/ab531c

Yao Y; Zhu H; Huang C; Wang J; Zhang P; Yao P, 2019, 'On the relations between the specific cutting energy and surface generation in micro-milling of maraging steel', International Journal of Advanced Manufacturing Technology, vol. 104, pp. 585 - 598, http://dx.doi.org/10.1007/s00170-019-03911-y

Yun H; Zou B; Wang J; Huang C; Li S, 2019, 'Optimization of energy consumption in coating removal for recycling scrap coated cemented carbide tools using hybrid laser-waterjet', Journal of Cleaner Production, vol. 229, pp. 104 - 114, http://dx.doi.org/10.1016/j.jclepro.2019.04.315

Yang M; Li C; Zhang Y; Jia D; Li R; Hou Y; Cao H; Wang J, 2019, 'Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions', Ceramics International, vol. 45, pp. 14908 - 14920, http://dx.doi.org/10.1016/j.ceramint.2019.04.226

Niu J; Huang C; Su R; Zou B; Wang J; Liu Z; Li C, 2019, 'Study on surface integrity of compacted graphite iron milled by cemented carbide tools and ceramic tools', International Journal of Advanced Manufacturing Technology, vol. 103, pp. 4123 - 4134, http://dx.doi.org/10.1007/s00170-019-03592-7

Zhang Z; Yao P; Wang J; Huang C; Cai R; Zhu H, 2019, 'Analytical modeling of surface roughness in precision grinding of particle reinforced metal matrix composites considering nanomechanical response of material', International Journal of Mechanical Sciences, vol. 157-158, pp. 243 - 253, http://dx.doi.org/10.1016/j.ijmecsci.2019.04.047

Zhao B; Liu H; Huang C; Wang J; Wang B; Hou Y, 2019, 'Cutting performance and crack self-healing mechanism of a novel ceramic cutting tool in dry and high-speed machining of Inconel 718', International Journal of Advanced Manufacturing Technology, vol. 102, pp. 3431 - 3438, http://dx.doi.org/10.1007/s00170-019-03386-x

Yao Y; Zhu H; Huang C; Wang J; Zhang P; Yao P, 2019, 'Investigation on chip formation and surface integrity in micro end milling of maraging steel', International Journal of Advanced Manufacturing Technology, vol. 102, pp. 1973 - 1984, http://dx.doi.org/10.1007/s00170-018-03219-3

Xu L; Huang C; Su R; Zhu H; Liu H; Liu Y; Li C; Wang J, 2019, 'Estimation of tool life and cutting burr in high speed milling of the compacted graphite iron by de based adaptive neuro-fuzzy inference system', Mechanical Sciences, vol. 10, pp. 243 - 254, http://dx.doi.org/10.5194/ms-10-243-2019

Chen Y; Wang J; Chen M, 2019, 'Enhancing the machining performance by cutting tool surface modifications: a focused review', Machining Science and Technology, vol. 23, pp. 477 - 509, http://dx.doi.org/10.1080/10910344.2019.1575412

Nguyen T; Wang J, 2019, 'A review on the erosion mechanisms in abrasive waterjet micromachining of brittle materials', International Journal of Extreme Manufacturing, vol. 1, pp. 012006 - 012006, http://dx.doi.org/10.1088/2631-7990/ab1028

Feng S; Huang C; Wang J; Jia Z, 2019, 'Surface quality evaluation of single crystal 4H-SiC wafer machined by hybrid laser-waterjet: Comparing with laser machining', Materials Science in Semiconductor Processing, vol. 93, pp. 238 - 251, http://dx.doi.org/10.1016/j.mssp.2018.12.037

Wang Z; Huang C; Wang J; Wang P; Bi S; Abbas CA, 2019, 'Design and Simulation of Flow Field for Bone Tissue Engineering Scaffold Based on Triply Periodic Minimal Surface', Chinese Journal of Mechanical Engineering (English Edition), vol. 32, http://dx.doi.org/10.1186/s10033-019-0329-7

Wang Z; Huang C; Wang J; Zou B, 2019, 'Development of a novel aqueous hydroxyapatite suspension for stereolithography applied to bone tissue engineering', Ceramics International, vol. 45, pp. 3902 - 3909, http://dx.doi.org/10.1016/j.ceramint.2018.11.063

Thongkaew K; Wang J; Li W, 2019, 'An investigation of the hole machining processes on woven carbon-fibre reinforced polymers (CFRPs) using abrasive waterjets', Machining Science and Technology: an international journal, vol. 23, pp. 19 - 38, http://dx.doi.org/10.1080/10910344.2018.1449217

Lv Z; Hou R; Tian Y; Huang C; Zhu H; Wang J, 2019, 'Dynamic response of ceramic material subjected to impact of hard particle', Materials Research Express, vol. 6, http://dx.doi.org/10.1088/2053-1591/aafaab

Zhang Z; Yao P; HAUNG C; Wang J; XUE D; DENG W; Zhang Z, 2019, 'Investigation and modeling of microgrooves generated on diamond grinding wheel by abrasive waterjet based on Box–Behnken experimental design', The International Journal of Advanced Manufacturing Technology, vol. 100, pp. 321 - 332, http://dx.doi.org/10.1007/s00170-018-2749-4

Yao Y; Zhu H; Huang C; Wang J; Zhang P; Yao P; Wang X, 2019, 'Determination of the minimum chip thickness and the effect of the plowing depth on the residual stress field in micro-cutting of 18 Ni maraging steel', International Journal of Advanced Manufacturing Technology, http://dx.doi.org/10.1007/s00170-019-04439-x

Zhang Z; Yao P; Wang J; Huang C; Zhu H; Liu H; Zou B, 2019, 'Nanomechanical characterization of RB-SiC ceramics based on nanoindentation and modelling of the ground surface roughness', Ceramics International, vol. 46, http://dx.doi.org/10.1016/j.ceramint.2019.11.094

Zhu H; Yao P; Wang J, 2018, 'A study of hybrid laser-waterjet micromachining of crystalline germanium', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 232, pp. 1903 - 1917, http://dx.doi.org/10.1177/0954405416654189

Zhang R; Huang C; Wang J; Zhu H; Yao P; Feng S, 2018, 'Micromachining of 4H-SiC using femtosecond laser', Ceramics International, vol. 44, pp. 17775 - 17783, http://dx.doi.org/10.1016/j.ceramint.2018.06.245

Chen Y; Li H; Hou L; Wang J; Bu X, 2018, 'An intelligent chatter detection method based on EEMD and feature selection with multi-channel vibration signals', Measurement: Journal of the International Measurement Confederation, vol. 127, pp. 356 - 365, http://dx.doi.org/10.1016/j.measurement.2018.06.006

Nguyen T; Liu D; Thongkaew K; Li H; Qi H; Wang J, 2018, 'The wear mechanisms of reaction bonded silicon carbide under abrasive polishing and slurry jet impact conditions', Wear, vol. 410-411, pp. 156 - 164, http://dx.doi.org/10.1016/j.wear.2018.06.001

Chen Y; Li H; Wang J, 2018, 'Predictive modelling of cutting forces in end milling of titanium alloy Ti6Al4V', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 232, pp. 1523 - 1534, http://dx.doi.org/10.1177/0954405416673108

Feng S; Huang C; Wang J; Zhu H, 2018, 'Material removal of single crystal 4H-SiC wafers in hybrid laser-waterjet micromachining process', Materials Science in Semiconductor Processing, vol. 82, pp. 112 - 125, http://dx.doi.org/10.1016/j.mssp.2018.03.035

Wang X; Huang C; Zou B; Liu G; Zhu H; Wang J, 2018, 'Experimental study of surface integrity and fatigue life in the face milling of Inconel 718', FRONTIERS OF MECHANICAL ENGINEERING, vol. 13, pp. 243 - 250, http://dx.doi.org/10.1007/s11465-018-0479-9

Bai X; Huang C; Wang J; Zou B; Liu H, 2018, 'Sintering mechanisms of Al2O3-based composite ceramic tools having 25% Si3N4 additions', International Journal of Refractory Metals and Hard Materials, vol. 73, pp. 132 - 138, http://dx.doi.org/10.1016/j.ijrmhm.2018.01.010

Lv Z; Hou R; Huang C; Zhu H; Wang J, 2018, 'Investigation on erosion mechanism in ultrasonic assisted abrasive waterjet machining', International Journal of Advanced Manufacturing Technology, vol. 94, pp. 3741 - 3755, http://dx.doi.org/10.1007/s00170-017-0995-5

Wang L; Huang C; Wang J; Zhu H; Liang X, 2018, 'An experimental investigation on laser assisted waterjet micro-milling of silicon nitride ceramics', Ceramics International, vol. 44, pp. 5636 - 5645, http://dx.doi.org/10.1016/j.ceramint.2017.12.211

Wang Y; Li C; Zhang Y; Yang M; Li BK; Dong L; Wang J, 2018, 'Processing Characteristics of Vegetable Oil-based Nanofluid MQL for Grinding Different Workpiece Materials', International Journal of Precision Engineering and Manufacturing - Green Technology, vol. 5, pp. 327 - 339, http://dx.doi.org/10.1007/s40684-018-0035-4

Zhao B; Liu H; Huang C; Wang J; Cheng M; Zhan Q, 2018, 'Evolution mechanisms of high temperature mechanical properties and microstructures of Al2O3/SiCw/TiCnnanocomposite materials', Journal of Alloys and Compounds, vol. 737, pp. 46 - 52, http://dx.doi.org/10.1016/j.jallcom.2017.12.100

Li M; Huang C; Zhao B; Liu H; Wang J; Liu Z, 2018, 'Crack-healing behavior of Al2O3-TiB2-TiSi2ceramic material', Ceramics International, vol. 44, pp. 2132 - 2137, http://dx.doi.org/10.1016/j.ceramint.2017.10.164

Li H; Wang J; Kwok N; Nguyen T; Yeoh GH, 2018, 'A study of the micro-hole geometry evolution on glass by abrasive air-jet micromachining', Journal of Manufacturing Processes, vol. 31, pp. 156 - 161, http://dx.doi.org/10.1016/j.jmapro.2017.11.013

Zhang P; Zhu H; Huang C; Wang J; Yao Y; Yao P, 2018, 'Experimental study on micro milling holes in high-strength elastic alloy 3J33', IPPTA: Quarterly Journal of Indian Pulp and Paper Technical Association, vol. 30, pp. 637 - 650

Zhao B; Liu H; Huang C; Wang J; Cheng M, 2017, 'Theoretical hardness analysis and experimental verification for composite ceramic tool materials', Ceramics International, vol. 43, pp. 15580 - 15585, http://dx.doi.org/10.1016/j.ceramint.2017.08.112

Li M; Huang C; Zhao B; Liu H; Wang J; Liu Z, 2017, 'Mechanical properties and microstructure of Al2O3-TiB2-TiSi2ceramic tool material', Ceramics International, vol. 43, pp. 14192 - 14199, http://dx.doi.org/10.1016/j.ceramint.2017.07.162

Yun H; Zou B; Wang J, 2017, 'Effects of sintering temperature and nano Ti(C,N) on the microstructure and mechanical properties of Ti(C,N) cermets cutting tool materials with low Ni-Co', Materials Science and Engineering A, vol. 705, pp. 98 - 104, http://dx.doi.org/10.1016/j.msea.2017.08.033


Back to profile page