Select Publications
Conference Papers
, 2022, 'Challenges of robotic disassembly in practice', in Procedia CIRP, Leuven, Belgium, pp. 513 - 518, presented at
, 2022, 'An ontology-based product usage context modeling method for smart customization', in Procedia CIRP, Virtual event, pp. 641 - 646, presented at
, 2021, 'A comparative LCA method for environmentally friendly manufacturing: Additive manufacturing versus Machining case', in Procedia CIRP, pp. 406 - 411, http://dx.doi.org/10.1016/j.procir.2021.01.125
, 2021, 'Eco-efficiency limits of product technologies towards achieving science-based targets', in Procedia CIRP, pp. 488 - 493, http://dx.doi.org/10.1016/j.procir.2021.01.139
, 2021, 'Investigation of the potential for an automated disassembly process of BEV batteries', in Procedia CIRP, pp. 559 - 564, http://dx.doi.org/10.1016/j.procir.2021.01.151
, 2021, 'Screw detection for disassembly of electronic waste using reasoning and re-training of a deep learning model', in Procedia CIRP, pp. 666 - 671, http://dx.doi.org/10.1016/j.procir.2021.01.172
, 2020, 'Monitoring and control of unstructured manufacturing big data', in IEEE International Conference on Industrial Engineering and Engineering Management, pp. 928 - 932, http://dx.doi.org/10.1109/IEEM45057.2020.9309975
, 2020, 'An investigation into the role of PV industry in meeting the growing energy demand towards absolute sustainability', in Procedia CIRP, pp. 383 - 387, http://dx.doi.org/10.1016/j.procir.2020.02.128
, 2020, 'Green paradox and the role of life cycle engineering', in Procedia CIRP, pp. 159 - 164, http://dx.doi.org/10.1016/j.procir.2020.02.057
, 2020, 'Product portfolio analysis towards operationalising science-based targets', in Procedia CIRP, pp. 377 - 382, http://dx.doi.org/10.1016/j.procir.2020.02.127
, 2019, 'Large scale MTConnect data collection', in Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019, pp. 77 - 82, http://dx.doi.org/10.1109/CIS-RAM47153.2019.9095828
, 2019, 'Life cycle assessment for the comparison of urban and non-urban produced products', in Procedia CIRP, West Lafayette, IN, USA, pp. 405 - 410, presented at
, 2018, 'Life Cycle Oriented Industrial Value Creation in Cities', in Procedia CIRP, pp. 94 - 99, http://dx.doi.org/10.1016/j.procir.2017.11.069
, 2017, 'A Review of Modelling Approaches for Conceptual Design of Complex
Engineering Systems (CESs)', in A Review of Modelling Approaches for Conceptual Design of Complex Engineering Systems (CESs), Institute of Electrical and Electronics Engineers (IEEE), Singapore, pp. 1266 - 1270, presented at
, 2017, 'Concurrent scheduling of a job shop and microgrid to minimize energy costs under due date constraints', in 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), IEEE, Singapore, pp. 1326 - 1330, presented at
, 2017, 'The Role of Circular Economy, Consumption Reduction, and Material Efficiency in Peak Waste', in Sixteenth International Waste Management and Landfill Symposium, Sixteenth International Waste Management and Landfill Symposium, Sardinia, Italy, presented at
, 2017, 'Delivery Lot Splitting as an Enabler for Cross-docking and Fast Delivery', in Procedia CIRP, pp. 639 - 644, http://dx.doi.org/10.1016/j.procir.2017.03.151
, 2017, 'Reducing of blast induced vibration problem at Gaziantep CYS quarry by using electronic initiation systems', in IMCET 2017: New Trends in Mining - Proceedings of 25th International Mining Congress of Turkey, pp. 507 - 515
, 2016, 'Designing warehouse logical architecture by applying object oriented model based system engineering', in Wang L; Kjellberg T (ed.), Procedia CIRP, Elsevier: Creative Commons Attribution Non-Commercial No-Derivatives License, Stockholm,Sweden, pp. 713 - 718, presented at
, 2016, 'Development of Software Tool for Cellular Structure Integration for Additive Manufacturing', in Procedia CIRP, pp. 489 - 494, http://dx.doi.org/10.1016/j.procir.2016.03.148
, 2016, 'Finite Element Analysis and Validation of Cellular Structures', in Procedia CIRP, pp. 94 - 99, http://dx.doi.org/10.1016/j.procir.2016.05.018
, 2015, 'General plans for removing main components in cognitive robotic disassembly automation', in ICARA 2015 - Proceedings of the 2015 6th International Conference on Automation, Robotics and Applications, pp. 501 - 506, http://dx.doi.org/10.1109/ICARA.2015.7081199
, 2015, 'Editorial', in Procedia CIRP, pp. viii - ix, http://dx.doi.org/10.1016/S2212-8271(15)00584-3
, 2015, 'Assessing the Impact of Embodied Water in Manufacturing Systems', in Procedia CIRP, pp. 80 - 85, presented at
, 2015, 'Characterising Energy Efficiency of Electrical Discharge Machining (EDM) Processes', in Procedia CIRP, pp. 263 - 268, presented at
, 2015, 'Defining Circulation Factories – A Pathway towards Factories of the Future', in Procedia CIRP, pp. 627 - 632, presented at
, 2015, 'Hierarchical Modelling of Complex Material and Energy Flow in Manufacturing Systems', in Procedia CIRP, pp. 92 - 97, presented at
, 2015, 'Industry-university Collaboration in Sustainable Manufacturing', in Procedia CIRP, pp. 8 - 12, presented at
, 2015, 'Life Cycle Assessment of Electric Vehicles – A Framework to Consider Influencing Factors', in Procedia CIRP, pp. 233 - 238, presented at
, 2015, 'Robot Assisted Disassembly for the Recycling of Electric Vehicle Batteries', in Procedia CIRP, pp. 716 - 721, presented at
, 2014, 'HEAT AND MASS TRANSFER MODELLING OF AN INDUSTRIAL AUTOCLAVE TO MINIMISE STEAM CONSUMPTION', in Proceedings of the 15th International Heat Transfer Conference, IHTC-15, Kyoto, Japan, presented at
, 2014, 'The latest generation of the electronic system enhanced safety and productivity', in Procedia Engineering, pp. 432 - 440, http://dx.doi.org/10.1016/j.proeng.2014.09.052
, 2014, 'Reactive modelling of on-site energy system components for real-time application', in Intelligent Energy and Power Systems (IEPS), 2014 IEEE International Conference on, pp. 219 - 224, presented at
, 2013, 'Outsourcing Outcomes and CO2 Emissions in Australian Manufacturing Industry', in Laptaned U; Benabdelhafid A (ed.), Outsourcing Outcomes and CO2 Emissions in Australian Manufacturing Industry, 2nd International Conference on Production and Supply Chain Management (ICPSCM), Rome, Italy, presented at
, 2012, 'A Forecasting Model for the Evaluation of Future Resource Availability', in Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Springer, Germany, pp. 449 - 454, presented at
, 2012, 'A Framework for Using Cognitive Robotics in Disassembly Automation', in Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Springer, Germany, pp. 173 - 178, presented at
, 2012, 'A Generic Simulation Model for Green Supplier Selection', in Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Springer, Germany, pp. 587 - 592, presented at
, 2012, 'A Hierarchical Evaluation Scheme for Industrial Process Chains: Aluminum Die Casting', in Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Springer, Germany, pp. 503 - 508, presented at
, 2012, 'Dynamic Total Cost of Ownership (TCO) Calculation of Injection Moulding Machines', in Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Springer, Germany, pp. 275 - 280, presented at
, 2012, 'Environmental Footprint of Magnetite Nanoparticle Application: Iron Oxide Case', in Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Springer, Germany, pp. 113 - 118, presented at
, 2012, 'Impact of Technology on Product Life Cycle Design: Functional and Environmental Perspective', in Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Springer, Germany, pp. 191 - 196, presented at
, 2012, 'Unit Process Energy Consumption Models for Material Addition Processes: A Case of the Injection Molding Process', in Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Springer, Germany, pp. 269 - 274, presented at
, 2012, 'Using Jatropha Oil Based Metalworking Fluids in Machining Processes: A Functional and Ecological Life Cycle Evaluation', in Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Springer, Germany, pp. 311 - 316, presented at
, 2011, 'An Investigation into Fixed Energy Consumption of Machine Tools', in Proceedings of the 18th CIRP International conference on Life Cycle Engineering, Springer, Berlin, pp. 268 - 273, presented at
, 2011, 'Electricity Metering and Monitoring in Manufacturing Systems', in Proceedings of the 18th CIRP International conference on Life Cycle Engineering, Springer, Berlin, pp. 1 - 10, presented at
, 2011, 'Energy Efficiency Measures for the Design and Operation of Machine Tools: An Axiomatic Approach', in Proceedings of the 18th CIRP International conference on Life Cycle Engineering, Springer, Berlin, pp. 274 - 279, presented at
, 2011, 'State of Research and an innovative Approach for simulating Energy Flows of Manufacturing Systems', in Proceedings of the 18th CIRP International conference on Life Cycle Engineering, Springer, Berlin, pp. 335 - 340, presented at
, 2011, 'Carbon Footprint Analysis of Products Cradle-To-Gate and Manufacturing Supply Chains', in 7th Australian Life Cycle Assessment Conference, Australian Life Cycle Assessment Society, Victoria, Australia, pp. 1 - 10, presented at
, 2011, 'Environmental footprint of single-use surgical instruments in comparison with multi-use surgical instruments', in Glocalized Solutions for Sustainability in Manufacturing - Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, pp. 623 - 628, http://dx.doi.org/10.1007/978-3-642-19692-8_108
, 2010, 'Impact of Manufacturing Supply Chains on the Embodied Energy of Products', in Proceedings International Conference on Manufacturing Systems, NWV Neuer Wissenschaftlincher Verlag, Vienna, pp. 187 - 194, presented at