By Associate Professor Farshid Pahlevani

Journal articles

Handoko W; Pahlevani F; Sahajwalla V, 2019, 'Enhancing corrosion resistance of high-carbon steel by formation of surface layers using wastes as input', Metals, 9, pp. 902, http://dx.doi.org/10.3390/met9080902

Banerjee A; Gangadhara Prusty B; Zhu Q; Pahlevani F; Sahajwalla V; Prusty G, 2019, 'Strain-Rate-Dependent Deformation Behavior of High-Carbon Steel under Tensile–Compressive Loading', JOM, 71, pp. 2757 - 2769, http://dx.doi.org/10.1007/s11837-019-03594-6

Heriyanto ; Pahlevani F; Sahajwalla V, 2019, 'Effect of glass aggregates and coupling agent on the mechanical behaviour of polymeric glass composite', Journal of Cleaner Production, 227, pp. 119 - 129, http://dx.doi.org/10.1016/j.jclepro.2019.04.152

Khayyam Nekouei R; Pahlevani F; Golmohammadzadeh R; Assefi M; Rajarao R; Chen YH; Sahajwalla V, 2019, 'Recovery of heavy metals from waste printed circuit boards: statistical optimization of leaching and residue characterization', Environmental Science and Pollution Research, 26, pp. 24417 - 24429, http://dx.doi.org/10.1007/s11356-019-05596-y

Handoko W; Pahlevani F; Sahajwalla V, 2019, 'Effect of austenitisation temperature on corrosion resistance properties of dual-phase high-carbon steel', Journal of Materials Science, 54, pp. 13775 - 13786, http://dx.doi.org/10.1007/s10853-019-03859-0

Handoko W; Pahlevani F; Hossain R; Sahajwalla V, 2019, 'Stress-Induced Phase Transformation and Its Correlation with Corrosion Properties of Dual-Phase High Carbon Steel', Journal of Manufacturing and Materials Processing, 3, pp. 55 - 55, http://dx.doi.org/10.3390/jmmp3030055

Heriyanto ; Pahlevani F; Sahajwalla V, 2019, 'Effect of different waste filler and silane coupling agent on the mechanical properties of powder-resin composite', Journal of Cleaner Production, 224, pp. 940 - 956, http://dx.doi.org/10.1016/j.jclepro.2019.03.269

Nekouei RK; Pahlevani F; Assefi M; Maroufi S; Sahajwalla V, 2019, 'Selective isolation of heavy metals from spent electronic waste solution by macroporous ion-exchange resins', Journal of Hazardous Materials, 371, pp. 389 - 396, http://dx.doi.org/10.1016/j.jhazmat.2019.03.013

Khayyam Nekouei R; Pahlevani F; Mayyas M; Maroufi S; Sahajwalla V, 2019, 'Direct transformation of waste printed circuit boards into high surface area t-SnO2 for photocatalytic dye degradation', Journal of Environmental Chemical Engineering, 7, http://dx.doi.org/10.1016/j.jece.2019.103133

Echeverria C; Pahlevani F; Sahajwalla V, 2019, 'Mechanical particle size reduction methods as potential interfacial optimization alternative for a low-carbon particulate reinforced marine bio-composite', Journal of Cleaner Production, 221, pp. 509 - 525, http://dx.doi.org/10.1016/j.jclepro.2019.02.265

Hossain R; Pahlevani F; Cholake ST; Privat K; Sahajwalla V, 2019, 'Innovative Surface Engineering of High-Carbon Steel through Formation of Ceramic Surface and Diffused Subsurface Hybrid Layering', ACS Sustainable Chemistry and Engineering, 7, pp. 9228 - 9236, http://dx.doi.org/10.1021/acssuschemeng.9b00051

Banerjee A; Hossain R; Pahlevani F; Zhu Q; Sahajwalla V; Prusty BG, 2019, 'Strain-rate-dependent deformation behaviour of high-carbon steel in compression: mechanical and structural characterisation', Journal of Materials Science, 54, pp. 6594 - 6607, http://dx.doi.org/10.1007/s10853-018-03301-x

Echeverria Encina C; Handoko W; Pahlevani F; Jiang C; Doolan C; Sahajwalla V, 2019, 'Engineered hybrid fibre reinforced composites for sound absorption building applications', Resources, Conservation and Recycling, 143, pp. 1 - 14, http://dx.doi.org/10.1016/j.resconrec.2018.12.014

Hossain R; Pahlevani F; Sahajwalla V, 2019, 'Stability of retained austenite in high carbon steel – Effect of post-tempering heat treatment', Materials Characterization, 149, pp. 239 - 247, http://dx.doi.org/10.1016/j.matchar.2019.01.034

Hossain R; Pahlevani F; Sahajwalla V, 2019, 'Surface modification of high carbon steel through microstructural engineering', Materials Characterization, 148, pp. 116 - 122, http://dx.doi.org/10.1016/j.matchar.2018.12.020

Echeverria C; Handoko W; Pahlevani F; Sahajwalla V, 2019, 'Cascading use of textile waste for the advancement of fibre reinforced composites for building applications', Journal of Cleaner Production, 208, pp. 1524 - 1536, http://dx.doi.org/10.1016/j.jclepro.2018.10.227

Handoko W; Pahlevani F; Sahajwalla V, 2018, 'Enhancing Corrosion Resistance and Hardness Properties of Carbon Steel through Modification of Microstructure', materials, 11, pp. 2404, http://dx.doi.org/10.3390/ma11122404

Karbalaei Mirza Shahrbabaki Z; Pahlevani F; Gorjizadeh N; Hossain R; Ghasemian M; Gaikwad V; Sahajwalla V, 2018, 'Direct Transformation of Metallized Paper into Al-Si Nano-Rod and Al Nano-Particles Using Thermal Micronizing Technique', Materials, 11, pp. 1964 - 1964, http://dx.doi.org/10.3390/ma11101964

Heriyanto ; Pahlevani F; Sahajwalla V, 2018, 'Waste glass powder – Innovative value-adding resource for hybrid wood-based products', Journal of Cleaner Production, 195, pp. 215 - 225, http://dx.doi.org/10.1016/j.jclepro.2018.05.205

Cholake S; Pahlevani F; Gaikwad V; Millicer H; Sahajwalla V, 2018, 'Cost-effective and sustainable approach to transform end-of-life vinyl banner to value added product', Resources, Conservation and Recycling, 136, pp. 9 - 21, http://dx.doi.org/10.1016/j.resconrec.2018.03.025

Tanaka Y; Pahlevani F; Privat K; Moon S; Dippenaar R; Kitamura S; Sahajwalla V, 2018, 'Engulfment Behavior of Inclusions in High-Carbon Steel: Theoretical and Experimental Investigation', Metallurgical and Materials Transactions B, http://dx.doi.org/10.1007/s11663-018-1394-5

Roy H; Pahlevani F; Cholake S; Echeverria C; Banerjee A; Sahajwalla V, 2018, 'Simulation of Marine Bio-Composite Using Empirical Data Combined with Finite Element Technique', journal of composite science, 2, pp. 48 - 48, http://dx.doi.org/10.3390/jcs2030048

Heriyanto ; Pahlevani F; Sahajwalla V, 2018, 'From waste glass to building materials – An innovative sustainable solution for waste glass', Journal of Cleaner Production, 191, pp. 192 - 206, http://dx.doi.org/10.1016/j.jclepro.2018.04.214

Hossain R; Pahlevani F; Sahajwalla V, 2018, 'Evolution of Microstructure and Hardness of High Carbon Steel under Different Compressive Strain Rates', Metals, 8, pp. 580, http://dx.doi.org/10.3390/met8080580

Handoko W; Pahlevani F; Sahajwalla V, 2018, 'The Effect of Low-Quantity Cr Addition on the Corrosion Behaviour of Dual-Phase High Carbon Steel', Metals, 8, pp. 1 - 12, http://dx.doi.org/10.3390/met8040199

Tanaka Y; Pahlevani F; Sahajwalla V, 2018, 'Agglomeration Behavior of Non-Metallic Particles on the Surface of Ca-Treated High-Carbon Liquid Steel: An In Situ Investigation', Metals, 8, pp. 176, http://dx.doi.org/10.3390/met8030176

Nekouei R; Pahlevani F; Rajarao R; Golmohammadzadeh R; Sahajwalla V, 2018, 'Two-step pre-processing enrichment of waste printed circuit boards: Mechanical milling and physical separation', Journal of Cleaner Production, http://dx.doi.org/10.1016/j.jclepro.2018.02.250

Nekouei R; Pahlevani F; Rajarao R; Gomohammadzadeh R; Sahajwalla V; Khayyam Nekouei R, 2018, 'Direct transformation of waste printed circuit boards to nano-structured powders through mechanical alloying', Materials and Design, 141, pp. 26 - 36, http://dx.doi.org/10.1016/j.matdes.2017.12.032

Yin S; Rajarao R; Pahlevani F; Sahajwalla V, 2018, 'Sustainable Steel Carburization by Using Snack Packaging Plastic Waste as Carbon Resources', Metals, 8, pp. 78, http://dx.doi.org/10.3390/met8010078

Heriyanto ; Pahlevani F; Sahajwalla V, 2018, 'Synthesis of calcium silicate from selective thermal transformation of waste glass and waste shell', Journal of Cleaner Production, 172, pp. 3019 - 3027, http://dx.doi.org/10.1016/j.jclepro.2017.11.109

Gaikwad V; Kumar U; Pahlevani F; Piadasa A; Sahajwalla V, 2017, 'Thermal Transformation of Waste Toner Powder into a Value-Added Ferrous Resource', ACS Sustainable Chemistry and Engineering, 5, pp. 11543 - 11550, http://dx.doi.org/10.1021/acssuschemeng.7b02875

Pahlevani F; 盾 八; 浩一 安; 正行 板; 政男 菊; 理 長; 英輔 新, 2017, '半凝固体の組織に及ぼす鋳造条件の影響', , pp. 83 - 83, http://dx.doi.org/10.11279/jfeskouen.146_83

Handoko W; Pahlevani F; Sahajwalla V, 2017, 'Corrosion behaviour of dual-phase high carbon steel – Microstructure influence', Journal of Manufacturing and Materials Processing, 1, pp. 21, http://dx.doi.org/10.3390/jmmp1020021

Hossain R; Pahlevani F; Witteveen E; Banerjee A; Joe B; Prusty G; Dippenaar R; Sahajwalla V, 2017, 'Hybrid structure of white layer in high carbon steel – Formation mechanism and its properties', Scientific Reports, 7, pp. 13288, http://dx.doi.org/10.1038/s41598-017-13749-7

Shokri A; Pahlevani F; Cole I; Sahajwalla V, 2017, 'Selective thermal transformation of old computer printed circuit boards to Cu-Sn based alloy', Journal of Environmental Management, 199, pp. 7 - 12, http://dx.doi.org/10.1016/j.jenvman.2017.05.028

盾 八; 健太郎 海; 雄太 志; Pahlevani F; 浩一 安; 正行 板; 理 長; 政男 菊, 2017, 'カップを用いた迅速スラリー製造法におけるスラリー温度の過渡特性', , pp. 83 - 83, http://dx.doi.org/10.11279/jfeskouen.150_83

健太郎 海; Pahlevani F; 雄一 遠; 盾 八; 浩一 安; 政男 菊; 理 長; 正行 板, 2017, 'カップ条件が半凝固スラリー品質に及ぼす影響', , pp. 133 - 133, http://dx.doi.org/10.11279/jfeskouen.148_133

Pahlevani F; Hossain R; Sahajwalla V, 2017, 'Effect of small addition of Cr on stability of retained austenite in high carbon steel', Materials characterization, 125, pp. 114 - 122, http://dx.doi.org/10.1016/j.matchar.2017.02.001

Echeverria C; Pahlevani F; Gaikwad V; Sahajwalla V, 2017, 'The effect of microstructure, filler load and surface adhesion of marine bio-fillers, in the performance of Hybrid Wood-Polypropylene Particulate Bio-composite', Journal of Cleaner Production, 154, pp. 284 - 294, http://dx.doi.org/10.1016/j.jclepro.2017.04.020

Mayyas M; Pahlevani F; Bucknall M; Maroufi S; You Y; Liu Z; Sahajwalla V, 2017, 'Thermocatalytic Conversion of Automotive Shredder Waste and Formation of Nanocarbons as a Process Byproduct', ACS Sustainable Chemistry and Engineering, 5, pp. 5440 - 5448, http://dx.doi.org/10.1021/acssuschemeng.7b00774

Hemraj DA; Hossain A; Ye Q; Qin JG; Leterme SC, 2017, 'Anthropogenic shift of planktonic food web structure in a coastal lagoon by freshwater flow regulation', SCIENTIFIC REPORTS, 7, http://dx.doi.org/10.1038/srep44441

Mayyas M; Pahlevani F; Maroufi S; Liu Z; Sahajwalla V, 2017, 'Waste conversion into high-value ceramics: Carbothermal nitridation synthesis of titanium nitride nanoparticles using automotive shredder waste', Journal of Environmental Management, 188, pp. 32 - 42, http://dx.doi.org/10.1016/j.jenvman.2016.11.079

Gorjizadeh N; Pahlevani F; Sahajwalla V, 2017, 'Metallised plastic waste as a new resource – Study of electronic structure and chemical bond', Journal of Materials and Environmental Sciences, 8, pp. 1599 - 1606, http://www.jmaterenvironsci.com/Document/vol8/vol8_N5/170-JMES-2676-Gorjizadeh.pdf

Shokri A; Pahlevani F; Levick K; Cole I; Sahajwalla V, 2017, 'Synthesis of copper-tin nanoparticles from old computer printed circuit boards', Journal of Cleaner Production, 142, pp. 2586 - 2592, http://dx.doi.org/10.1016/j.jclepro.2016.11.017

Pahlevani F; Kumar R; Gorjizadeh N; Hossain R; Cholake ST; Privat K; Sahajwalla V; Goda R, 2016, 'Enhancing steel properties through in situ formation of ultrahard ceramic surface', Scientific Reports, 6, pp. 38740, http://dx.doi.org/10.1038/srep38740

Pahlevani F; Dippenaar R; Gorjizadeh N; Cholake ST; Hossain R; Kumar R; Sahajwalla V, 2016, 'Surface Modification of Steel Using Automotive Waste as Raw Materials', Procedia Manufacturing, 7, pp. 387 - 394, http://dx.doi.org/10.1016/j.promfg.2016.12.007

Hossain R; Pahlevani F; Quadir MZ; Sahajwalla V, 2016, 'Stability of retained austenite in high carbon steel under compressive stress: An investigation from macro to nano scale', Scientific Reports, 6, http://dx.doi.org/10.1038/srep34958

Sahajwalla V; Pahlevani F; Maroufi S; Rajarao R, 2016, 'Green Manufacturing: A Key to Innovation Economy', Journal of Sustainable Metallurgy, 2, pp. 273 - 275, http://dx.doi.org/10.1007/s40831-016-0087-z

Handoko W; Pahlevani F; Emmanuelawati I; Sahajwalla V, 2016, 'Transforming automotive waste into TiN and TiC ceramics', Materials Letters, 176, pp. 17 - 20, http://dx.doi.org/10.1016/j.matlet.2016.04.066

Mayyas M; Mayyas M; Pahlevani F; Liu Z; Rajarao R; Sahajwalla V, 2016, 'From automotive shredder residue to nano-ceramics and graphitic carbon—Thermal degradation kinetics', Journal of Analytical and Applied Pyrolysis, 120, pp. 60 - 74, http://dx.doi.org/10.1016/j.jaap.2016.04.010

Back to profile page