By Emeritus Professor Bob Randall

Conference Papers

Chen J; Randall RB, 2013, 'Use of block pseudo angular acceleration for engine misfire diagnosis', in Proceedings of Acoustics 2013 – Victor Harbor, Victor Harbour, SA, presented at Acoustics 2013, Victor Harbour, SA, 17 November 2013 - 20 November 2013

Randall RB, 2013, 'A History of Cepstrum Analysis and its Application to Mechanical Problems', in Capdessus C; Antoni J (ed.), Proceedings Surveillance 7, Chartres, France, presented at Surveillance 7 - International Conference, Chartres, France, 29 October 2013 - 30 October 2013

Ratz J; Forbes G; Randall R, 2013, 'Gas turbine blade natural frequency measurement using external casing vibrations', in Proceedings for the Joint Conference: MFPT 2013 and ISA's 59th International Instrumentation Symposium, ISA 2013: Sensors and Systems for Reliability, Safety and Affordability

Chen J; Randall RB, 2013, 'Simulating bearing knock in an IC engine', in Crocker M (ed.), 20th International Congress on Sound and Vibration 2013 (ICSV20), Bangkok, Thailand, presented at 20th International Conference on Sound and Vibration, ICSV20, Bangkok, Thailand, 07 July 2013 - 11 July 2013

Randall RB, 2013, 'New Developments in the Application of Fault Simulation in Machine Diagnostics', in Dron J-P (ed.), New Developments in the Application of Fault Simulation in Machine Diagnostics, 3rd International Congress on the Engineering of Industrial Risks (CIRI 2013), Reims, France, presented at 3rd International Congress on the Engineering of Industrial Risks (CIRI 2013), Reims, France, 03 July 2013 - 05 July 2013

Randall RB; Antoni J; Manzato S; Peeters B; Smith W, 2013, 'New Applications of the Cepstrum in OMA', in Cunha A; Ramos L (ed.), Proceedings 5th International Operational Modal Analysis Conference (IOMAC), Guimaraes, Portugal, presented at IOMAC 2013, Guimaraes, Portugal, 13 May 2013 - 15 May 2013

Randall RB; Sawalhi N, 2013, 'Gear Parameter identification in Wind Turbines using diagnostic analysis of gearbox vibration signals', in Proceedings of the third International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMNO 2013, Ferrara, Italy, presented at CMMNO 2013, Ferrara, Italy, 08 May 2013 - 10 May 2013

Randall RB; Sawalhi N, 2013, 'Cepstral Removal of Periodic Spectral Components from Time Signals', in Dalpiaz G; Rubini R (ed.), Advances in Condition Monitoring of Machinery in Non-Stationary Operations : Proceedings of the 3rd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMN0 2013, Springer, Ferrara, Italy, presented at 3rd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMN02013, Ferrara, Italy, 08 May 2013 - 10 May 2013

Deshpande L; Sawalhi N; Randall RB, 2012, 'Bearing fault simulation using finite element model updating and reduction techniques', in Proceedings of 7th Australasian Congress of Applied Mechanics, Engineers Australia, Canberra ACT, pp. 148 - 154, presented at 7th Australasian Congress of Applied Mechanics, Adelaide, 09 December 2012 - 12 December 2012

Chen J; Randall R; Peeters B; Van Der Auweraer H, 2012, 'Automated diagnosis of piston slap faults in internal combustion engines: Based on a simulation model', in Australian Acoustical Society Conference 2012, Acoustics 2012: Acoustics, Development, and the Environment, pp. 469 - 475

Chen J; Randall RB; Peeters B; Van Der Auweraer HD, 2012, 'Automated diagnosis of piston slap faults in internal combustion engines: based on a simulation model', in Acoustics 2012 Fremantle: Acoustics, Development and the Environment, The Australian Acoustical Society, Western Australian Division, Perth, WA, pp. 1 - 7, presented at Acoustics 2012, Fremantle, 21 November 2012 - 23 November 2012

Coats M; Randall RB, 2012, 'Order-Tracking with and without a tacho signal for gear fault diagnostics', in Acoustics 2012 Fremantle: Acoustics, Development and the Environment, The Australian Acoustical Society, Western Australian Division, Perth, WA, pp. 1 - 8, presented at Acoustics 2012, Fremantle, 21 November 2012 - 23 November 2012

Peeters B; Randall RB; Manzato S; Marra F; Coppotelli G, 2012, 'Helicopter in-flight modal analysis: solutions for dealing with harmonics and noise', in Sas P; Moens D; Jonckheere S (eds.), Proceedings of ISMA2012 - International Conference on Noise and Vibration Engineeering, KU Leuven, Leuven, Belgium, pp. 2045 - 2046, presented at ISMA2012 - International Conference on Noise and Vibration Engineeering, Leuven, Belgium, 17 September 2012 - 19 September 2012

Chen J; Randall RB; Peeters B; Van Der Auweraer HD; Desmet W, 2012, 'Inertial property estimation by the modal model method', in Sas P; Moens D; Jonckheere S (eds.), Proceedings of ISMA2012 - International Conference on Noise and Vibration Engineeering, KU Leuven, Leuven, Belgium, pp. 2071 - 2080, presented at ISMA2012 - International Conference on Noise and Vibration Engineeering, Leuven, Belgium, 17 September 2012 - 19 September 2012

Randall RB; Peeters B; Antoni J; Manzato S, 2012, 'New cepstral methods of signal pre-processing for operational modal analysis', in Sas P; Moens D; Jonckheere S (eds.), Proceedings of ISMA2012 - International Conference on Noise and Vibration Engineeering, KU Leuven, Leuven, Belgium, pp. 755 - 764, presented at ISMA2012 - International Conference on Noise and Vibration Engineeering, Leuven, Belgium, 17 September 2012 - 19 September 2012

Coats M; Randall RB, 2012, 'Compensating for speed variation by order tracking with and without a tacho signal', in 10th International Conference on Vibrations in Rotating Machinery, IMechE, London, UK, pp. 727 - 738, presented at 10th International Conference on Vibrations in Rotating Machinery, London, UK, 11 September 2012 - 13 September 2012

Chen J; Randall RB; Peeters B; Desmet W; Van Der Auweraer HD, 2012, 'Neural network based diagnosis of mechanical faults in IC engines', in 10th International Conference on Vibrations in Rotating Machinery, IMechE, London, UK, pp. 679 - 690, presented at 10th International Conference on Vibrations in Rotating Machinery, London, UK, 11 September 2012 - 13 September 2012

Deshpande L; Randall RB; Sawalhi N, 2012, 'Improved simulation of bearing faults using a finite element model reduction technique', in The 9th Intnl Conf on Condition Monitoring and Machinery Failure Prevention Technologies, Coxmoor Publishing Co (for BINDT), UK, pp. 1 - 11, presented at The 9th Intnl Conf on Condition Monitoring and Machinery Failure Prevention Technologies, London, UK, 12 June 2012 - 14 June 2012

Randall RB; Sawalhi N; Coats M, 2012, 'Separation of Gear and Bearing Fault Signals from a Wind Turbine Transmission under Varying Speed and Load', in Fakhfakh T; Bartelmus W; Chaari F; Zimroz R; Haddar M (eds.), Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO’2012, Springer, Berlin Heidelberg, pp. 3 - 12, presented at Condition Monitoring of Machinery in Non-Stationary Operations (CMMNO'2012), Hammamet Tunisia, 26 March 2012 - 28 March 2012, http://www.springer.com/engineering/mechanical+engineering/book/978-3-642-28767-1

Randall RB, 2012, 'Updated cepstral methods for operational modal analysis', Jacksonville, FL, pp. 201 - 209, presented at 30th IMAC, A Conference on Structural Dynamics, 2012, Jacksonville, FL, 30 January 2012 - 02 February 2012, http://dx.doi.org/10.1007/978-1-4614-2425-3_18

Chen J; Randall R; Peeters B; Van Der Auweraer H; Desmet W, 2012, 'Automated diagnosis of piston slap in engines', in 9th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2012, CM 2012 and MFPT 2012, pp. 1145 - 1155

Randall B; Grzebieta R, 2012, 'The Origin of ACAM by Bob Randall and Raphael Grzebieta', in Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 9 - 11

Ruber K; Kanapathipillai S; Feng N; Randall R, 2011, 'Investigations of a tuned vibration absorber with high damping for increasing acoustic panels sound transmission loss in low frequency range', in Australian Acoustical SocietyConference 2011, Acoustics 2011: Breaking New Ground, pp. 158 - 164

Deshpande L; Sawalhi N; Randall RB, 2011, 'Gearbox Fault Simulation using a Finite Element Model Reduction Technique', in Proceedings of Acoustics 2011, The Australian Acoustical Society, Darlinghurst NSW, pp. 1 - 7, presented at Acoustics 2011, Gold Coast, Australia, 02 November 2011 - 04 November 2011

Chen J; Randall RB, 2011, 'A vibration signal based simulation model for the misfire of internal combustion engines.', in Condition Monitoring and Machinery Failure Prevention Technologies. International Conference. 8th 2011, British Institute of Non-destructive Testing (BINDT), UK, pp. 659 - 671, presented at The Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Cardiff, Wales, UK, 20 June 2011 - 22 June 2011

Sawalhi N; Randall RB, 2011, 'Cepstrum Editing (Liftering) to Remove Discrete Frequency Signals leaving a Signal Dominated by Structural Response Effects- and Enhance Fault Detection In Rolling Element Bearings', in Condition Monitoring and Machinery Failure Prevention Technologies. International Conference. 8th 2011, British Institute of Non-destructive Testing (BINDT), UK, pp. 132 - 143, presented at The Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Cardiff, Wales, UK, 20 June 2011 - 22 June 2011

Deshpande L; Sawalhi N; Randall RB, 2011, 'Dynamic simulation of a gearbox system in the presence of bearing faults using finite element model reduction techniques', in Condition Monitoring and Machinery Failure Prevention Technologies. International Conference. 8th 2011, British Institute of Non-destructive Testing (BINDT), UK, pp. 878 - 889, presented at The Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Cardiff, Wales, UK, 20 June 2011 - 22 June 2011, http://www.proceedings.com/12148.html

Sawalhi N; Randall RB, 2011, 'Signal pre-whitening for fault detection enhancement and surveillance in rolling element bearings', in Condition Monitoring and Machinery Failure Prevention Technologies. International Conference. 8th 2011, British Institute of Non-destructive Testing (BINDT), UK, pp. 549 - 561, presented at The Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Cardiff, Wales, UK, 20 June 2011 - 22 June 2011

Sawalhi N; Randall RB, 2011, 'Signal Pre-whitening using Cepstrum Editing (Liftering) to enhance Fault Detection in Rolling Element Bearings', in COMADEM 2011, COMADEM International, UK, pp. 1 - 7, presented at Comadem 2011, Stavanger, Norway, 31 May 2011 - 01 June 2011

Randall RB; Sawalhi N; Marscher W; Thomas W; Weiss J, 2011, 'Decomposition of structural vibration for wind turbine diagnosis', in Technical Program for MFPT: The Applied Systems Health Management Conference 2011: Enabling Sustainable Systems, Machine Failure Prevention Technology Society (MFPT), Dayton, OH, presented at Applied Systems Health Management Conference 2011: Enabling Sustainable Systems, MFPT 2011, Virginia Beach, VA, 10 May 2011 - 12 May 2011

Randall RB; Sawalhi N, 2011, 'Editing time signals using the real cepstrum', in Technical Program for MFPT: The Applied Systems Health Management Conference 2011: Enabling Sustainable Systems, Machine Failure Prevention Technology Society (MFPT), Dayton, OH, presented at Applied Systems Health Management Conference 2011: Enabling Sustainable Systems, MFPT 2011, Virginia Beach, VA, 10 May 2011 - 12 May 2011

Sawalhi N; Deshpande L; Randall RB, 2011, 'Improved simulations of faults in gearboxes for diagnostic and prognostic purposes using a reduced finite element model of the casing', in Fourteenth Australian Aeronautical Conference, Royal Aeronautical Society (Australian Divison) / Engineers Australia, Australia, pp. 1 - 14, presented at Seventh DSTO International Conference on Health and Usage Monitoring, Melbourne, Australia, 28 February 2011 - 03 March 2011

Deshpande L; Sawalhi N; Randall RB, 2011, 'Fault simulation in a gearbox using finite element model reduction techniques', in Proulx T (ed.), Conference Proceedings of the Society for Experimental Mechanics Series, Springer, USA, pp. 399 - 410, presented at 29th IMAC, a Conference on Structural Dynamics, Jacksonville, FL, USA, 31 January 2011 - 03 February 2011

Randall RB; Sawalhi N, 2011, 'Use of the cepstrum to remove selected discrete frequency components from a time signal', in Proulx T (ed.), Conference Proceedings of the Society for Experimental Mechanics Series, Rotating Machinery, Structural Health Monitoring, Shock and Vibration, Vol. 5, Springer, New York, USA, pp. 451 - 461, presented at 29th IMAC, a Conference on Structural Dynamics, Jacksonville, FL, USA, 31 January 2011 - 03 February 2011, http://www.powells.com/biblio?isbn=9781441994271

Randall RB; Sawalhi N, 2011, 'Signal processing tools for tracking the size of a spall in a rolling element bearing', in IUTAM Bookseries, pp. 429 - 440, http://dx.doi.org/10.1007/978-94-007-0020-8_36

Forbes GL; Alshroof O; Randall RB, 2010, 'Gas turbine blade vibration and casing wall pressure interaction', in Proceedings of the 6th Australiasian Congress on Applied Mechanics, Engineers Australia, ACT Australia, pp. 1 - 9, presented at ACAM 2010, Perth, 12 December 2010 - 15 December 2010

Deshpande L; Sawalhi N; Randall RB, 2010, 'Improved gearbox simulations for diagnostic and prognostics purposes using finite element model reduction techniques', in Proceedings of the 6th Australiasian Congress on Applied Mechanics, Engineers Australia, ACT Australia, pp. 1 - 10, presented at ACAM 2010, Perth, 12 December 2010 - 15 December 2010

Urbanek J; Barszcz T; Sawalhi N; Randall RB, 2010, 'Comparison of amplitude based and phase based methods for speed tracking in application to wind turbines', Krakow, presented at 11th Workshop on Smart Diagnostics of Structures, Krakow, 18 October 2010 - 20 October 2010

Sawalhi N; Randall RB, 2010, 'Simulation of the vibration generated by entry and exit to/from a spall in a rolling element bearing', in Proceedings of 20th International Congress on Acoustics ICA 2010, Australian Acoustical Society, Sydney, pp. 1 - 7, presented at International Congress on Acoustics, Sydney, 23 August 2010 - 27 August 2010

Sawalhi N; Randall RB, 2010, 'Improved simulations for fault size estimation in rolling element bearings', in The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Coxmoor Publishing Company, England, pp. 1 - 12, presented at The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Stratford-upon-Avon, England, 22 June 2010 - 24 June 2010

Randall RB, 2010, 'Signal decomposition for symptom enhancement: A journey from Fourier analysis through time/frequency analysis to blind source separation', in Proceedings of ISMA 2010 - International Conference on Noise and Vibration Engineering, including USD 2010, pp. 15 - 34

Coats M; Sawalhi N; Randall RB, 2009, 'Extraction of Tacho Information from a Vibration Signal for Improved Synchronous Averaging', in Proceedings of Acoustics 2009: Research to Consulting, Australian Acoustical Society, Australia, presented at Acoustics 2009, Adelaide, SA, 23 November 2009 - 25 November 2009, http://www.acoustics.asn.au/joomla/acoustics-2009.html#Papers

Forbes GL; Randall RB, 2009, 'Simulation of Gas Turbine blade vibration measurement from unsteady casing wall pressure', in Proceedings of Acoustics 2009: Research to Consulting, Australian Acoustical Society, Australia, presented at Acoustics 2009, Adelaide, SA, 23 November 2009 - 25 November 2009

Chia W; Randall RB; Antoni J, 2009, 'System Identification with Mean Differential Cepstrum using Random Decrement', in Proceedings of Acoustics 2009: Research to Consulting, Australian Acoustical Society, Australia, presented at Acoustics 2009, Adelaide, SA, 23 November 2009 - 25 November 2009

Randall RB, 2009, 'The use of simulation models to generate data corresponding to faults in machines.', in The Proceedings of 2009 8th International Conference on Reliability, Maintainability and Safety, Chengdu, China, Chengdu, China, 20 July 2009 - 24 July 2009, http://dx.doi.org/10.1109/ICRMS.2009.5269971

Randall RB, 2009, 'The application of fault simulation to machine diagnostics and prognostics', in Pawelczyk M; Bismor D (ed.), Proceedings of the 16th International Congress on Sound and Vibration (ICSV16), Polish Acoustical Society, Poland, pp. 1 - 14, presented at Recent developments in acoustics, noise and vibration, Krakow, Poland, 05 July 2009 - 09 July 2009

Randall RB, 2009, 'The present state and future developments in machine diagnostics and prognostics', in Pawelczyk M; Bismor D (ed.), Proceedings of the 16th International Congress on Sound and Vibration (ICSV16), Polish Acoustical Society, Poland, pp. 1 - 14, presented at Recent developments in acoustics, noise and vibration, Krakow, Poland, 05 July 2009 - 09 July 2009

Desbazeille M; Randall RB; Guillet F; El Badaoui M; Hoisnard C, 2009, 'Fault detection and localization of a large diesel engine by analyzing the instantaneous crankshaft angular speed', Dublin, presented at 6th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Dublin, 23 June 2009 - 25 June 2009

Sawalhi N; Randall RB, 2009, 'Tracking of spall size in rolling element bearings', Dublin, presented at 6th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Dublin, 23 June 2009 - 25 June 2009

Randall RB; Sawalhi N, 2009, 'Signal processing techniques for bearing fault size determination', in 22nd International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management, Fundaci n TEKNIKER, San Sebastian, Spain, presented at 22nd International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management, San Sebastian, Spain, 09 June 2009 - 11 June 2009

Back to profile page