ORCID as entered in ROS
https://orcid.org/0000-0003-4042-1566
Select Publications
Conference Papers
, 2009, 'Signal processing tools for tracking the size of a spall in a rolling element bearing', DELHI, presented at
, 2009, 'Effects of limiting the bandwidth of the vibration signal on bearing fault detection and diagnosis using state of the art techniques', in Thirteenth Australian International Aerospace Congress, DSTO, Melbourne, presented at
, 2009, 'Gas Turbine Casing Response to Blade Vibrations: Analytical and Experimental results', in Thirteenth Australian International Aerospace Congress, DSTO, Melbourne, presented at
, 2008, 'Novel signal processing techniques to aid bearing prognostics', in IEEE (ed.), First International Conference on Prognostics and Health Management, Prognostics and health management, Denver, Colorado, USA, pp. 1 - 8, presented at
, 2008, 'Diagnosis of milling cutting tools from the excitation identified using cepstral analysis and second order cyclic statistics', in Sas P; Bergan B (ed.), Proceedings of ISMA2008 - International Conference on Noise and Vibration Engineeering, KATHOLIEKE UNIV LEUVEN, DEPT WERKTUIGKUNDE, Leuven, Belgium, pp. 751 - 764, presented at
, 2008, 'New cepstral methods of operational modal analysis', in Sas P; Bergan B (ed.), Proceedings of ISMA2008 - International Conference on Noise and Vibration Engineeering, Leuven, Belgium, pp. 2535 - 2548, presented at
, 2008, 'Detection of rolling element bearing faults by analysis of the motor current', in University of Exeter (ed.), Ninth International Conference on Vibrations in Rotating Machinery, Exeter, United Kingdom, pp. 573 - 582, presented at
, 2008, 'Improved simulation of faults in rolling element bearings in gear boxes', in University of Exeter (ed.), Ninth International Conference on Vibrations in Rotating Machinery, Exeter, United Kingdom, pp. 539 - 548, presented at
, 2008, 'Localised fault diagnosis in rolling element bearings in gearboxes', in The Fifth International Conference on Condition Monitoring & Machinery Failure Prevention Technologies, Condition Monitoring & Machinery Failure Prevention Technologies, Edinburgh, United Kingdom, presented at
, 2008, 'Separation of excitation forces from simulated gas turbine casing response measurements', in 7th European Conference on Structural Dynamics - EURODYN 2008, Southampton, United Kingdom, presented at
, 2008, 'Optimal rib stiffening for noise reduction of constant speed gearboxes', in Ahn T; Jeon JY; Han J-H; Hong S-Y; Kim K-J; Song O (eds.), 15th International Congress on Sound and Vibration, Daejeon, Korea, pp. 2339 - 2346, presented at
, 2008, 'Detection of a Blade Fault from Simulated Gas Turbine Casing Response Measurements', in PROCEEDINGS OF THE FOURTH EUROPEAN WORKSHOP ON STRUCTURAL HEALTHMONITORING 2008, Kracow, Poland, pp. 882 - 889, presented at
, 2008, 'A combined lumped mass parameter and finite element model of a single stage gearbod for bearing fault simulation', in Svoboda V (ed.), 21st International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management, Condition Monitoring and Diagnostic Engineering Management, Prague, Czech Republic, pp. 1 - 6, presented at
, 2008, 'Vibration-based approach to lifetime prediction of washing machines.', in Applying life cycle knowledge to engineering solutions, Applying life cycle knowledge to engineering solutions, University of New South Wales, presented at
, 2007, 'Propagative identification of SIMO systems using the mean differential cepstrum (MDC).', in Proceedings of the 5th Australasian Congress on Applied Mechanics : 10-12 December 2007, Brisbane, Australia, Engineers Australia, Brisbane, Queensland, Australia, presented at
, 2007, 'Simulated gas turbine casing response to rotor blade pressure excitation.', in Proceedings of the 5th Australasian Congress on Applied Mechanics : 10-12 December 2007, Brisbane, Australia, Engineers Australia, Brisbane, Queensland, Australia, presented at
, 2007, 'Simulation of vibrations produced by localized faults in rolling elements of bearings in gearboxes.', in Proceedings of the 5th Australasian Congress on Applied Mechanics : 10-12 December 2007, Brisbane, Australia, Engineers Australia, Brisbane, Queensland, Australia, presented at
, 2007, 'Contrast function based fourth-order statistics and Wiener filtering for separation of convolutive mixtures.', in ICSV14 2007: 14th International Congress on Sound and Vibration, Cairns, Qld, presented at
, 2007, 'Development of an in-service dynamic model of a double deck passenger train.', in ICSV14 2007: 14th International Congress on Sound and Vibration, Cairns, Qld, presented at
, 2007, 'Minimisation of noise and vibration level from a steel panel.', in ICSV14 2007: 14th International Congress on Sound and Vibration, Cairns, Qld, presented at
, 2007, 'Rolling element bearing fault diagnosis based on genetic algorithms', in ICSV14 2007: 14th International Congress on Sound and Vibration, Cairns, Qld, presented at
, 2007, 'Spectrum enhancement of laser vibrometer signals using a new speckle noise reduction technique and angular resampling.', in ICSV14 2007: 14th International Congress on Sound and Vibration, Cairns, Qld, presented at
, 2007, 'Gear tooth crack detection by a state space model approach', in Machinery and Process Health Monitoring: Future Trends and Prospects, Machinery and Process Health Monitoring: Future Trends and Prospects, Faro, Portugal, presented at
, 2007, 'Semi-automated bearing diagnostics - three case studies.', in Machinery and Process Health Monitoring: Future Trends and Prospects, Machinery and Process Health Monitoring: Future Trends and Prospects, Faro, Portugal, presented at
, 2007, 'The in-cylinder pressure reconstruction and indicated torque estimation based on instantaneous engine speed and one measured in-cylinder pressure.', in Machinery and Process Health Monitoring: Future Trends and Prospects, Machinery and Process Health Monitoring: Future Trends and Prospects, Faro, Portugal, presented at
, 2007, 'Combining cyclostationarity and the frequency domain subspace technique for operational modal analysis', in Key Engineering Materials, pp. 473 - 478, http://dx.doi.org/10.4028/0-87849-444-8.473
, 2006, 'Simulation of the vibrations produced by extended bearing faults in gearboxes', in Acoustics 2006: Noise of Progress, Christchruch, New Zealand, presented at
, 2006, 'Simulating gear and bearing interactions in the presence of faults', in Rotor Dynamics, Rotor Dynamics, Vienna, Austria, presented at
, 2006, 'Blind source separation and system identification for convolutive mixtures with well separated modes.', in Sas P; De Munck M (ed.), Noise and Vibration Engineering 2006, Leuven, Belgiuim, pp. 3993 - 4001, presented at
, 2006, 'Multiple-input-multiple-output blind system identification on simulated 5 DOF system using the mean differential cepstrum', in Brennan MJ; Liguore S; Mace BR; Muggleton JM; Murphy KD; Petersson BAT; Rizzi SA; Shen R (eds.), Recent Advances in Structural Dynamics, Recent Advances in Structural Dynamics, Southampton England, pp. 1 - 12, presented at
, 2006, 'Operational modal analysis of a diesel electric locomotive using cyclostationarity', in Brennan MJ; Liguore S; Mace BR; Muggleton JM; Murphy KD; Petersson BAT; Rizzi SA; Shen A (eds.), Recent Advances in Structural Dynamics, Recent Advances in Structural Dynamics, Southampton England, pp. 1 - 12, presented at
, 2006, 'Helicopter gearbox bearing blind fault identification using a range of analysis techniques', in Engineering Asset Management, Gold Coast, Qld, presented at
, 2006, 'Gear and bearing fault simulation applied to diagnostics and prognostics', in Role of condition monitoring and diagnostics in health management systems for manufacturing, transport, infrastructure and process industries, Role of condition monitoring and diagnostics in health management systems for manufacturing, transport, infrastructure and process industries, Lulea, Sweden, presented at
, 2006, 'Blind system identification using matrix mean differential cepstru with QR-Cholesky decomposition', in 14th IFAC Symposium System Identification (SYSID 2006), Newcastle, NSW, presented at
, 2006, 'Operational modal analysis using cyclostationarity and the complex cepstrum', in 14th IFAC Symposium System Identification (SYSID 2006), Newcastle, NSW, presented at
, 2005, 'Minimising of the noise radiation of constant speed gearboxes.', in International Congress on Sound and Vibration 2005, Lisbon, Portugal, presented at
, 2005, 'Applications of spectral kurtosis in machine diagnostics and prognostics
KEYNOTE PAPER', in Damage assessment of structures, Gdanisk, Poland, presented at
, 2005, 'An operational analysis technique for the MIMO situation based on cepstral techniques', in Brincker R; Moller N (ed.), 1st International Conference on Operational Modal Ananlysis, Copenhagen, Denmark, pp. 561 - 568, presented at
, 2005, 'Do anti-resonance frequencies benefit finite element model updating?', in Brincker R; Moller N (ed.), 1st International Conference on Operational Modal Ananlysis, Copenhagen, Denmark, pp. 369 - 376, presented at
, 2005, 'Cepstral methods of modal analysis', in Noise and Vibration Emerging Methods, Noise and Vibration Emerging: Methods, Saint Raphael, France, pp. 1 - 12, presented at
, 2005, 'Adaptive design and adjustment of low noise gearboxes.', in 4th Australasian Congress on Applied Mechanics, Melbourne, presented at
, 2005, 'Blind source separation of internal combustion engine vibration signals.', in 4th Australasian Congress on Applied Mechanics, Melbourne, presented at
, 2005, 'Blind system identification in a multiple-input-multiple-output (MIMO) system using the mean differential cepstrum (MDC).', in 4th Australasian Congress on Applied Mechanics, Melbourne, presented at
, 2005, 'Operational modal analysis of a mechanical structure with cyclostationary inputs.', in 4th Australasian Congress on Applied Mechanics, Melbourne, presented at
, 2005, 'Spectral kurtosis enhancement using autoregressive models.', in 4th Australasian Congress on Applied Mechanics, Melbourne, presented at
, 2004, 'The application of spectral kurtosis to bearing diagnostics.', in Acoustics 2004: Transportation Noise and Vibration: The New Millenium, Acoustics 2004: Transportation Noise and Vibration: The New Millenium, Gold Coast, Qld, presented at
, 2004, 'Rolling element bearing fault detection using improved envelope analysis', in Vibrations in Rotating Machinery, Swansea, UK, presented at
, 2004, 'The effects of localized gear tooth damage in the gear dynamics - a comparison of the effect of a gear tooth root crack and a spall in the gear transmission error.', in Vibrations in Rotating Machinery, Swansea, UK, pp. 333 - 342, presented at
, 2004, 'Signal decomposition for symptom enhancement: a journey from Fourier analysis through time/frequency analysis to blind source separation.', in Michalski R (ed.), Technical Diagnostics, Technical Diagnostics, Poznan, Poland, pp. 1 - 54, presented at
, 2004, 'The use of spectral kurtosis in bearing diagnostics', in Ivanov NI; Crocker MJ (ed.), Eleventh international congress on sound and vibration, 11th international congress on sound and vibration, St Petersburg, Russia, pp. 999 - 1006, presented at
Filter by type
https://orcid.org/0000-0003-4042-1566