ORCID as entered in ROS
https://orcid.org/0000-0001-8342-6442
Select Publications
Conference Papers
, 2014, 'Finite element formulation of three dimensional reinforced column joint', Yogyakarta, Indonesia, presented at
, 2014, 'Intensification of low density development - Functional bridging buildings', in Proceedings of the 12th International Conference on Steel, Space and Composite Structures, pp. 47 - 59
, 2014, 'Post-weld heat treatment of high strength s690 steel plate-to-plate joints - Part II: Ultimate strength', in Proceedings of the 12th International Conference on Steel, Space and Composite Structures, pp. 397 - 402
, 2014, 'Post-weld heat treatment of high strength s690 steel plate-to-plate joints-Part I: Influence of heat treatment', in Proceedings of the 12th International Conference on Steel, Space and Composite Structures, pp. 251 - 258
, 2013, 'A study on the cloud effect on debris trajectory', Singapore, presented at
, 2013, 'Numerical modeling on concrete debris ricocheting off sand ground', Singapore, presented at
, 2013, 'Simulation of Fracture/breakup of Concrete Magazine using Cohesive Element', Madrid, Spain, presented at
, 2013, 'Analytical model on the bond stress-slip relationship between steel reinforcement and concrete for RC beam-column joints', in Applied Mechanics and Materials, pp. 1212 - 1218, http://dx.doi.org/10.4028/www.scientific.net/AMM.275-277.1212
, 2013, 'Fatigue behavior of rectangular built-up hollow section joint made of high strength steel s690', in Proceedings of the 13th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2013
, 2012, 'Plenary speech: Challenges in simulation of break-up of concrete magazine and the debris throw', Crowne Plaze, Gold Coast, Australia, presented at
, 2012, 'A 3D co-rotational beam element with geometric and material nonlinearities for steel and RC framed structures', Jeju, Korea, presented at
, 2012, 'Numerical simulation of blast debris ricocheting off sandy ground surface', Jeju, Korea, presented at
, 2012, 'Parametric study on RC beam-column subassemblages under column-removal scenarios by fibre beam elements in FEMFAN3D', Jeju, Korea, presented at
, 2012, 'Influence of welding on high strength steel plate-toplate Y-Joints part I: Simulation of residual stress', in 11th International Conference on Steel Space and Composite Structures, pp. 243 - 248
, 2012, 'Influence of welding on high strength steel plate-toplate Y-joints part II: Simulation of heat affected zone', in 11th International Conference on Steel Space and Composite Structures, pp. 311 - 315
, 2012, 'Residual stress investigation of welded high strength steel box T-joints', in Tubular Structures XIV - Proceedings of the 14th International Symposium on Tubular Structures, ISTS 2012, pp. 141 - 147, http://dx.doi.org/10.1201/b13139-23
, 2011, 'Numerical modeling of residual stress distributions in high strength steel plate-to-plate T and Y joint', Kuching, Sarawak, Malaysia, presented at
, 2011, 'Residual Stress Distributions of High Strength Steel Plate-to-Plate T and Y Joints', Kuching, Sarawak, Malaysia, presented at
, 2011, 'Ultimate strength of high strength steel welded plate-to-plate joints', Kuching, Sarawak, Malaysia, presented at
, 2011, 'Influence of Residual Stress on Stress Concentration of High Strength Steel Plate-to-Plate Joints', Singapore, pp. 189 - 198, presented at
, 2011, 'Effect of residual stress on stress concentration of high strength steel plate-to-plate joints', in 10th International Conference on Steel Space and Composite Structures, pp. 127 - 135
, 2010, 'A Co-rotation shell element with material nonlinearities', in Civil-Comp Proceedings
, 2009, 'Fatigue study of partially overlapped circular hollow section k-joints', in ICASS '09/IJSSD - Proceedings of Sixth International Conference on Advances in Steel Structures and Progress in Structural Stability and Dynamics, pp. 602 - 611
, 2008, 'Fatigue modeling for partially overlapped CHS K-joints with surface crack', Shanghai, China, pp. 119 - 126, presented at
, 2008, 'Hierarchical modelling tools for fatigue analysis of partially overlapped circular hollow section k-joints', Singapore, pp. 132 - 152, presented at
, 2007, 'Finite element modellings of tubular joints for fatigue assessment', Singapore, presented at
, 2007, 'Experimental studies on stress concentration factors for partially overlapped Circular Hollow Section K-joints', in 5th International Conference on Advances in Steel Structures, ICASS 2007, pp. 986 - 991
, 2007, 'Fatigue behaviour of partially overlapped CHS K-joints', in Proceedings of 8th Pacific Structural Steel Conference - Steel Structures in Natural Hazards, PSSC 2007, pp. 145 - 152
, 2007, 'Experimental studies on fatigue behavior of Partially Overlapped Circular Hollow Section K-joints', Singapore, presented at
, 2007, 'Mesh Generation for Partially Overlapped Circular Hollow Section K-Joints under Fatigue Loadings', Singapore, presented at
, 2007, 'Experimental studies on stress distributions for partially overlapped CHS K-joints', in Proceedings of the 9th International Conference on Steel, Space and Composite Structures, pp. 389 - 394
, 2006, 'Crack surface under weld toe in square hollow section T-joints', in Tubular Structures XI - Proceedings of the 11th International Symposium and IIW International Conference on Tubular Structures, pp. 621 - 628
, 2006, 'An experimental study on the fatigue behaviour of partially overlapped CHS K-Joints', Kuala Lumpur, Malaysia, pp. 273 - 279, presented at
, 2006, 'Geometrical Modeling of overlap K-joints', Kuala Lumpur, Malaysia, pp. 425 - 434, presented at
, 2005, 'Large-Scale Fatigue Tests on Square Tubular T-joints', in Proceedings of Advances in Experimental Structural Engineering, Nagoya, Japan, presented at
, 2005, 'Debonding Failure Model for FRP Retrofitted Steel Beams', Shanghai, China, presented at
, 2005, 'Numerical Modelling of Square Tubular T-Joints with a Surface Crack at Corner', Shanghai, China, presented at
, 2005, 'The Ultimate Behaviour of Cracked Square Hollow Section T-joints', Shanghai China, presented at
, 2004, 'Numerical Models in Linear and Non-linear FE Analysis of Cracked Rectangular Hollow Section Joints', Singapore, presented at
, 2004, 'Validation of Stress Intensity Factors of a Surface Crack in Tubular K-joints', Perth, Australia, presented at
, 2003, 'Parametric Equations for Stress Intensity Factors of Cracked Tubular T&Y-Joints', in Proceedings of the International Offshore and Polar Engineering Conference, pp. 2505 - 2512
, 2003, 'A new stress recovery and a posteriori error estimation scheme for RKPM', Goteborg, Sweden, presented at
, 2003, 'An automatic adaptive mesh generator for 3D thin-walled structures', Goteborg, Sweden, presented at
, 2003, 'Surface intersection by tracing of neighbours', Goteborg, Sweden, presented at
, 2003, 'Estimation of Stress Intensity Factors of Weld Toe Surface Cracks in Tubular K-Joints', Madrid, Spain, pp. 347 - 355, presented at
, 2003, 'Fatigue Analysis of Square-to-Square Tubular T-Joint with Surface Crack', Madrid, Spain, pp. 375 - 382, presented at
, 2003, 'Parametric equations for stress intensity factors of cracked tubular T&Y-joints', in Chung JS; Wardenier J; Frederking RMW; Koterayama W (eds.), PROCEEDINGS OF THE THIRTEENTH (2003) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 4, INTERNATIONAL SOCIETY OFFSHORE& POLAR ENGINEERS, HI, HONOLULU, pp. 255 - 262, presented at
, 2002, 'Estimation of stress intensity factors of weld toe surface cracks in tubular K-joints', Singapore, pp. 223 - 230, presented at
, 2002, 'Stress analysis of square-to-square tubular T-joint under combined loads', Singapore, pp. 199 - 206, presented at
, 2001, 'The Enriched Partition-of-Unity finite element methods for stress-intensity factors computations', Singapore, presented at
Filter by type
https://orcid.org/0000-0001-8342-6442