By Professor Serkan Saydam

Journal articles

Tapia Cortez CA; Saydam S; Coulton J; Sammut C, 2016, 'Dynamic-cognition of Strategic Mineral Commodities; An Empirical Assessment', International Journal of Geological and Environmental Engineering, 3, pp. 1 - 1, https://www.waset.org/abstracts/36210

Li L; Hagan PC; Saydam S; Hebblewhite B, 2016, 'Parametric study of rockbolt shear behaviour by double shear test', Rock Mechanics and Rock Engineering, http://dx.doi.org/10.1007/s00603-016-1063-4

Zoorabadi M; Saydam S; Timms W; Hebblewhite B, 2016, 'Linear flow behaviour of matched joints – case study on standard JRC profiles', Geomechanics and Geoengineering, 11, pp. 189 - 200, http://dx.doi.org/10.1080/17486025.2016.1153728

Masoumi H; Saydam S; Hagan PC, 2016, 'Unified size-effect law for intact rock', International Journal of Geomechanics, 16, http://dx.doi.org/10.1061/(ASCE)GM.1943-5622.0000543

Li L; Hagan P; Saydam S; Hebblewhite B, 2016, 'Shear resistance contribution of support systems in double shear test', Tunnelling and Underground Space Technology, 56, pp. 168 - 175, http://dx.doi.org/10.1016/j.tust.2016.03.011

Masoumi H; Saydam S; Hagan PC, 2016, 'Incorporating scale effect into a multiaxial failure criterion for intact rock', International Journal of Rock Mechanics and Mining Sciences, 83, pp. 49 - 56, http://dx.doi.org/10.1016/j.ijrmms.2015.12.013

Vandermaat D; Saydam S; Crosky A; Hagan PC, 2016, 'Laboratory based coupon testing for the understanding of SCC in rockbolts', Mining Technology, 125, pp. 174 - 183, http://dx.doi.org/10.1080/14749009.2015.1122296

Li Z; Tenney J; Chalmers D; Mitra R; Saydam S, 2016, 'Application of thin spray-on liners to enhance the predrained coal seam gas quality', Energy Exploration and Exploitation, 34, pp. 746 - 765, http://dx.doi.org/10.1177/0144598716659599

Chen J; Hagan PC; Saydam S, 2016, 'Parametric study on the axial performance of a fully grouted cable bolt with a new pull-out test', International Journal of Mining Science and Technology, 26, pp. 53 - 58, http://dx.doi.org/10.1016/j.ijmst.2015.11.010

Vandermaat D; Saydam S; Hagan PC; Crosky A, 2016, 'Examination of rockbolt stress corrosion cracking utilising full size rockbolts in a controlled mine environment', International Journal of Rock Mechanics and Mining Sciences, 81, pp. 86 - 97, http://dx.doi.org/10.1016/j.ijrmms.2015.11.007

Craig P; Saydam S; Hagan PC; Crosky A; Hebblewhite B, 2016, 'Investigations into the corrosive environments contributing to premature failure of Australian coal mine rock bolts', International Journal of Mining Science and Technology, 26, pp. 59 - 64, http://dx.doi.org/10.1016/j.ijmst.2015.11.011

Chen J; Hagan PC; Saydam S, 2016, 'Load transfer behavior of fully grouted cable bolts reinforced in weak rocks under tensile loading conditions', Geotechnical Testing Journal, 39, pp. 252 - 263, http://dx.doi.org/10.1520/GTJ20150096

Chen J; Hagan P; Saydam S, 2016, 'Load transfer behaviour of fully grouted cable bolts reinforced in weak rocks under tensile loading conditions', Geotechnical Testing Journal, http://dx.doi.org/10.1520/GTJ20150096

Chen J; Saydam S; Hagan PC, 2015, 'An analytical model of the load transfer behavior of fully grouted cable bolts', CONSTRUCTION AND BUILDING MATERIALS, 101, pp. 1006 - 1015, http://dx.doi.org/10.1016/j.conbuildmat.2015.10.099

Chen J; Hagan PC; Saydam S, 2015, 'Parametric study on the axial performance of a fully grouted cable bolt with a new pull-out test', International Journal of Mining Science and Technology, 26, pp. 53 - 58, http://dx.doi.org/10.1016/j.ijmst.2015.11.010

Masoumi H; Saydam S; Hagan PC, 2015, 'A modification to radial strain calculation in rock testing', Geotechnical Testing Journal, 38, pp. 813 - 822, http://dx.doi.org/10.1520/GTJ20140238

Zoorabadi M; Saydam S; Timms W; Hebblewhite B, 2015, 'Non-linear flow behaviour of rough fractures having standard JRC profiles', International Journal of Rock Mechanics and Mining Sciences

Saydam S; Nguyen P, 2015, 'Applicability of shock heating and freezing on regolith found on asteroids for exploration drilling', MEA Journal of Research Projects Review 2015, 4, pp. 21 - 26, http://www.mea.edu.au/

Saydam S; Kecojevic V, 2014, 'Publication strategies for academic career development in mining engineering', Transactions of the Institutions of Mining and Metallurgy Section A: Mining Technology, 123, pp. 46 - 55, http://dx.doi.org/10.1179/1743286314Y.46

Skorut SA; Saydam S, 2014, 'Optimising cut-off grade strategy for Seabed Massive Sulfide operations', MINING EDUCATION AUSTRALIA – JOURNAL OF RESEARCH PROJECTS REVIEW, 3, pp. 51 - 62, http://www.mea.edu.au/asset/53cf17eebf0b3/mea-journal-of-research-projects-review-2014.pdf

Mitra R; Saydam S, 2014, 'Can artificial intelligence and fuzzy logic be integrated into virtual reality applications in mining?', Journal of the South African Institute of Mining and Metallurgy, 114, pp. 1009 - 1016, http://www.saimm.co.za/Journal/v114n12p1009.pdf

Suorineni FT; Hebblewhite B; Saydam S, 2014, 'Geomechanics challenges of contemporary deep mining: a suggested model for increasing future mining safety and productivity', Journal of the South African Institute of Mining and Metallurgy, 114, pp. 1023 - 1032, http://www.saimm.co.za/Journal/v114n12p1023.pdf

Craig GA; Saydam S; Dempster AG, 2014, 'Mining off-Earth minerals: a long-term play?', Journal of the South African Institute of Mining and Metallurgy, 114, pp. 1023 - 1032, http://www.saimm.co.za/Journal/v114n12p1039.pdf

Mitra R; Saydam S, 2013, 'Using Virtual Reality In Tertiary Education', The International Journal of Technologies in Learning, 19, pp. 97 - 112, http://www.commongroundpublishing.com/

Saydam S; Mitra R, 2013, 'An Implementation of Final Year Mining Engineering Project Based Courses', The International Journal of Learning in Higher Education, 19, pp. 91 - 105, http://www.commongroundpublishing.com/

Zoorabadi M; Saydam S; Timms W; Hebblewhite B, 2013, 'Hydraulic properties of standard JRC profiles', Rock Mechanics and Rock Engineering

Mitra R; Saydam S, 2013, 'An Implementation of Final Year Mining Engineering Project-based Courses', The International Journal of Learning in Higher Education, 19, pp. 91 - 105, http://dx.doi.org/10.18848/2327-7955/cgp/v19i04/58968

Graham TKC; Saydam S, 2013, 'Strategic Project Risk Management for An Emerging Miner', MEA Research Projects Review 2012, 2, pp. 31 - 36

Hussain F; Saydam S; Mitra R; Cinar Y, 2012, 'Experimental study for reducing gas inflow by use of thin spray-on liners in underground coal mines', Transactions of the Institutions of Mining and Metallurgy Section A Mining Technology, 121, pp. 61 - 67, http://dx.doi.org/10.1179/1743286312Y.0000000002

Mitra R; Saydam S, 2012, 'Applications of Virtual Reality Modules for Mining Engineering Education', Cuprum, 2, pp. 51 - 62

Saydam S; Mitra R, 2012, 'Implementation of Project-based courses in Mining Engineering Education', Cuprum, 3, pp. 71 - 82

Zoorabadi M; Saydam S; Hebblewhite B, 2012, 'Parameter Study on Prediction Methods for TBM Penetration Rate', Geotechnical and Geological Engineering, http://dx.doi.org/10.1007/s10706-012-9594-2

Sayadi AR; Heidari M; Saydam S, 2010, 'Study of key factors in geometrical and grade modelling of copper porphyry deposits', International Journal of Mining and Mineral Engineering, 2, pp. 59 - 77, http://inderscience.metapress.com/content/731737llj8246l62/

Saydam S, 2009, 'Gaining an insight into Future Mining scenarios', Ausimm Bulletin, pp. 82 - 85

Saydam S; Mitra R; Daly C; Hagan P, 2009, 'A collaborative approach to Mining education in Australia', The International Journal of Learning, 16, pp. 13 - 29, http://ijl.cgpublisher.com/product/pub.30/prod.2095

Mitra R; Saydam S; Daly C; Hagan P, 2009, 'Enhanced student collaboration in mining engineering through peer review of major projects', The International Journal of Learning, 16, pp. 501 - 519, http://ijb.cgpublisher.com/product/pub.30/prod.2494

Saydam S; Morkel J, 2008, 'The Influence of Potassium on the Weathering Properties of Kimberlite and the information Provided by Different Testing Methods', International Journal of Rock Mechanics and Mining Sciences, 45, pp. 1187 - 1194, http://www.sciencedirect.com/science/article/pii/S136516090800018X

Saydam M; Yilmaz S; Seven E; Ercocen AR; Saydam S; Sezer H, 2006, 'The Effects of Topically Applied Nitrofurazone and Rifamycine on Wound Healing', Wounds-A Compendium of Clinical Research and Practice, 18, pp. 71 - 76

Onargan T; Koca MY; Kucuk K; Deliormanli AH; Saydam S, 2004, 'Impact of the Mechanical Characteristics of Weak Rocks and Trona Ore Beds on The Main Drift Deformation at The Beypazari Mine, Turkey', International Journal of Rock Mechanics and Mining Sciences, 41, pp. 641 - 654, http://www.sciencedirect.com/science/article/pii/S1365160904000140

Saydam S; Onargan T; Deliormanli AH, 2003, 'The relationship between slake durability and geomechanical properties for upper rocks of Beypazaritrona bed in Ankara, Turkey', Journal of the South African Institute of Mining and Metallurgy, 103, pp. 241 - 252

Saydam S; Onargan T; Deliormanli AH, 2003, 'The Relationship Between Slake Durability and Geomechanical Properties for Upper Rocks of Beypazari Trona Bed in Ankara, Turkey', Journal of the South African Institute of Mining and Metallurgy, 103, pp. 241 - 252, http://www.saimm.co.za/Journal/v103n04p241.pdf

Gurgen S; Yalcin E; Saydam S; Deliormanli AH, 1999, 'Reserve Calculation of Sivas-Divrigi Iron Deposit by Geo-statistical Kriging Method',

Saydam S; Yalcin E, 1997, 'Investigation of The Effect of Block Dimensions on The Coal Reserve Estimation',

Saydam S; Onargan T; Deliormanli AH; Hacimustafaoglu SR, 1997, 'Investigation Of The Influence Of Surface Hardness On The Strength Of Marbles',

Back to profile page