By Associate Professor Farshid Pahlevani

Journal articles

Hossain R; Pahlevani F; Witteveen E; Banerjee A; Joe B; Prusty G; Dippenaar R; Sahajwalla V, 2017, 'Hybrid structure of white layer in high carbon steel – Formation mechanism and its properties', Scientific Reports, 7, pp. 13288, http://dx.doi.org/10.1038/s41598-017-13749-7

Shokri A; Pahlevani F; Cole I; Sahajwalla V, 2017, 'Selective thermal transformation of old computer printed circuit boards to Cu-Sn based alloy', Journal of Environmental Management, 199, pp. 7 - 12, http://dx.doi.org/10.1016/j.jenvman.2017.05.028

Pahlevani F; Hossain R; Sahajwalla V, 2017, 'Effect of small addition of Cr on stability of retained austenite in high carbon steel', Materials characterization, 125, pp. 114 - 122, http://dx.doi.org/10.1016/j.matchar.2017.02.001

Echeverria C; Pahlevani F; Gaikwad V; Sahajwalla V, 2017, 'The effect of microstructure, filler load and surface adhesion of marine bio-fillers, in the performance of Hybrid Wood-Polypropylene Particulate Bio-composite', Journal of Cleaner Production, 154, pp. 284 - 294, http://dx.doi.org/10.1016/j.jclepro.2017.04.020

Mayyas M; Pahlevani F; Bucknall M; Maroufi S; You Y; Liu Z; Sahajwalla V, 2017, 'Thermocatalytic Conversion of Automotive Shredder Waste and Formation of Nanocarbons as a Process Byproduct', ACS Sustainable Chemistry and Engineering, 5, pp. 5440 - 5448, http://dx.doi.org/10.1021/acssuschemeng.7b00774

Hemraj DA; Hossain A; Ye Q; Qin JG; Leterme SC, 2017, 'Anthropogenic shift of planktonic food web structure in a coastal lagoon by freshwater flow regulation', Scientific Reports, 7, pp. 44441, http://dx.doi.org/10.1038/srep44441

Mayyas M; Pahlevani F; Maroufi S; Liu Z; Sahajwalla V, 2017, 'Waste conversion into high-value ceramics: Carbothermal nitridation synthesis of titanium nitride nanoparticles using automotive shredder waste', Journal of Environmental Management, 188, pp. 32 - 42, http://dx.doi.org/10.1016/j.jenvman.2016.11.079

Gorjizadeh N; Pahlevani F; Sahajwalla V, 2017, 'Metallised plastic waste as a new resource – Study of electronic structure and chemical bond', Journal of Materials and Environmental Sciences, 8, pp. 1599 - 1606, http://www.jmaterenvironsci.com/Document/vol8/vol8_N5/170-JMES-2676-Gorjizadeh.pdf

Shokri A; Pahlevani F; Levick K; Cole I; Sahajwalla V, 2017, 'Synthesis of copper-tin nanoparticles from old computer printed circuit boards', Journal of Cleaner Production, http://dx.doi.org/10.1016/j.jclepro.2016.11.017

Pahlevani F; Kumar R; Gorjizadeh N; Hossain R; Cholake ST; Privat K; Sahajwalla V; Goda R, 2016, 'Enhancing steel properties through in situ formation of ultrahard ceramic surface', Scientific Reports, 6, pp. 38740, http://dx.doi.org/10.1038/srep38740

Pahlevani F; Dippenaar R; Gorjizadeh N; Cholake ST; Hossain R; Kumar R; Sahajwalla V, 2016, 'Surface Modification of Steel Using Automotive Waste as Raw Materials', Procedia Manufacturing, 7, pp. 387 - 394, http://dx.doi.org/10.1016/j.promfg.2016.12.007

Hossain R; Pahlevani F; Quadir MZ; Sahajwalla V, 2016, 'Stability of retained austenite in high carbon steel under compressive stress: An investigation from macro to nano scale', Scientific Reports, 6, http://dx.doi.org/10.1038/srep34958

Sahajwalla V; Pahlevani F; Maroufi S; Rajarao R, 2016, 'Green Manufacturing: A Key to Innovation Economy', Journal of Sustainable Metallurgy, 2, pp. 273 - 275, http://dx.doi.org/10.1007/s40831-016-0087-z

Handoko W; Pahlevani F; Emmanuelawati I; Sahajwalla V, 2016, 'Transforming automotive waste into TiN and TiC ceramics', Materials Letters, 176, pp. 17 - 20, http://dx.doi.org/10.1016/j.matlet.2016.04.066

Mayyas M; Mayyas M; Pahlevani F; Liu Z; Rajarao R; Sahajwalla V, 2016, 'From automotive shredder residue to nano-ceramics and graphitic carbon—Thermal degradation kinetics', Journal of Analytical and Applied Pyrolysis, 120, pp. 60 - 74, http://dx.doi.org/10.1016/j.jaap.2016.04.010

Mayyas M; Pahlevani F; Handoko W; Sahajwalla V, 2016, 'Preliminary investigation on the thermal conversion of automotive shredder residue into value-added products: Graphitic carbon and nano-ceramics', Waste Management, 50, pp. 173 - 183, http://dx.doi.org/10.1016/j.wasman.2016.02.003

Molkeri A; Pahlevani F; Emmanuelawati I; Sahajwalla V, 2016, 'Thermal and mechanical stability of retained austenite in high carbon steel: An in-situ investigation', Materials Letters, 163, pp. 209 - 213, http://dx.doi.org/10.1016/j.matlet.2015.10.083

Kitamura SY; Ito K; Pahlevani F; Mori M, 2014, 'Development of simulation model for hot metal dephosphorization process', Tetsu to Hagane Journal of the Iron and Steel Institute of Japan, 100, pp. 491 - 499, http://dx.doi.org/10.2355/tetsutohagane.100.491

Kitamura SY; Pahlevani F, 2014, 'Process simulation of dephosphorization treatment of hot metal with high phosphorus content', Tetsu to Hagane Journal of the Iron and Steel Institute of Japan, 100, pp. 500 - 508, http://dx.doi.org/10.2355/tetsutohagane.100.500

Pahlevani F; Shibata H; Maruoka N; Kitamura SY; Inoue R, 2011, 'Behavior of vanadium and niobium during hot metal dephosphorization by CaO-SiO2-FetO slag', ISIJ International, 51, pp. 1624 - 1630, http://dx.doi.org/10.2355/isijinternational.51.1624

Pahlevani F; Kitamura SY; Shibata H; Maruoka N, 2010, 'Distribution of P2O5 between Solid Solution of 2CaO.Si02-3CaO.P2O5 and Liquid Phase', ISIJ International, 50, pp. 822 - 829, http://dx.doi.org/10.2355/isijinternational.50.822

Pahlevani F; Kitamura S; Shibata H; Maruoka N, 2010, 'Simulation of steel refining process in converter', Steel Research International, 81, pp. 617 - 622, http://dx.doi.org/10.1002/srin.201000053

Pahlevani F; Kitamura S-Y; Shibata H; Maruoka N, 2010, 'Distribution of P₂O₅ between Solid Solution of 2CaO•SiO₂-3CaO•P₂O₅ and Liquid Phase', ISIJ INTERNATIONAL, 50, pp. 822 - 829, http://dx.doi.org/10.2355/isijinternational.50.822

Nili-Ahmadabadi M; Pahlevani F; Babaghorbani P, 2008, 'Effect of Slope Plate Variable and Reheating on the Semi-Solid Structure of Ductile Cast Iron', Tsinghua Science and Technology, 13, pp. 147 - 151, http://dx.doi.org/10.1016/s1007-0214(08)70026-9

Nili-Ahmadabadi M; Pahlevani F; Babaghorbani P, 2008, 'Effects of slope plate variable and reheating on semi-solid structure of ductile cast iron', China Foundry, 5, pp. 36 - 38

Pahlevani F; Anzai K; Niyama E, 2008, 'Quick semi-solid slurry making method using metallic cup', Solid State Phenomena, 141-143, pp. 463 - 468, http://dx.doi.org/10.4028/www.scientific.net/ssp.141-143.463

Nili-Ahmadabadi M; Pahlevani F; Babaghorbani P, 2008, 'Effect of slope plate variable and reheating on the semi-solid structure of ductile cast iron', Tsinghua Science and Technology, 13, pp. 147 - 151, http://dx.doi.org/10.1109/tst.2008.6071860

Yaokawa J; Pahlevani F; Anzai K; Viriyarattanasak P; Itamura M, 2008, 'Temperature Distribution in AC4CH Aluminum Alloy Slurry Made in Metallic Vessel', Journal of Japan Foundry Engineering Society, 80, pp. 156 - 163, http://dx.doi.org/10.11279/jfes.80.156

Pahlevani F; Yaokawa J; Anzai K; Niyama E, 2007, 'Theoretical considerations for thermal control over solid fraction of aluminum alloy slurry prepared by cup-cast method', Materials Transactions, 48, pp. 2297 - 2303, http://dx.doi.org/10.2320/matertrans.MB200751

八百川 盾; 海野 健; 志田 雄; Pahlevani F; 安斎 浩; 板村 正; 長澤 理; 菊池 政, 2007, 'カップを用いた迅速スラリー製造法におけるスラリー温度の過渡特性', , 150, pp. 83 - 83, http://dx.doi.org/10.11279/jfeskouen.150_83

Pahlevani F; Yaokawa J; Anzai K, 2006, 'Investigation of heat transfer in the cup-cast method by experiment, and analytical method', Wit Transactions on Engineering Sciences, 53, pp. 249 - 258, http://dx.doi.org/10.2495/HT060251

Pahlevani F; Yaokawa J; Itamura M; Kikuchi M; Nagasawa O; Anzai K, 2006, 'Analytical model for heat transfer phenomena in cup-cast method', Solid State Phenomena, 116-117, pp. 569 - 572, http://dx.doi.org/10.4028/www.scientific.net/SSP.116-117.569

Pahlevani F; Endo Y; Yaokawa J; Itamura M; Kikuchi M; Nagasawa O; Anzai K, 2006, 'Development of cup-cast method; semi-solid slurry preparation without external stirring force', Solid State Phenomena, 116-117, pp. 358 - 361, http://dx.doi.org/10.4028/www.scientific.net/SSP.116-117.358

Pahlevani F; Yaokawa J; Anzai K, 2006, 'Semi-solid slurry preparation without additional stirring, cup-cast method', Materials Science Forum, 519-521, pp. 1835 - 1840, http://dx.doi.org/10.4028/www.scientific.net/msf.519-521.1835

海野 健; Pahlevani F; 遠藤 雄; 八百川 盾; 安斎 浩; 菊池 政; 長澤 理; 板村 正, 2006, 'カップ条件が半凝固スラリー品質に及ぼす影響', , 148, pp. 133 - 133, http://dx.doi.org/10.11279/jfeskouen.148_133

Pahlevani F; 八百川 盾; 安斎 浩; 板村 正; 菊池 政; 長澤 理; 新山 英, 2005, 'Effect of casting conditions on semi-solid structure', , 146, pp. 83 - 83, http://dx.doi.org/10.11279/jfeskouen.146_83

Pahlevani F; Nili-Ahmadabadi M, 2004, 'Development of semi-solid ductile cast iron', International Journal of Cast Metals Research, 17, pp. 157 - 161, http://dx.doi.org/10.1179/136404604225020560

Pahlevani F; Salarfar S; Nili Ahmadabadi M, 2003, 'Dendritic-globular structure transition of ductile iron in semi-solid casting using cooling slope plate', Journal of material engineering association, 6, pp. 45 - 49

Pahlevani F; Nili Ahmadabadi M, 2003, 'Review on Semi-solid metal casting and processing', Iranian Journal of cast metal, 4, pp. 1 - 20

Pahlevani F; Nili Ahmadabadi M, 2003, 'Semi-solid casting by slope plate method', Iranian journal of cast metal, 2, pp. 30 - 34

Pahlevani F, 2002, 'Semi-sloid casting by mechanical stirring method', Iranian journal of cast metal, 3, pp. 23 - 28

Conference Papers

Biswal S; Udayakumar S; Pahlevani F; Sarmadi N; Sahajwalla V, 2024, 'An investigative study on the interfacial behaviour of waste graphite resource with liquid iron', The Australasian Institute of Mining & Metallurgy, pp. 1495 - 1500, presented at 12th International Conference of Molten Slags, Fluxes and Salts (MOLTEN 2024) Proceedings, http://dx.doi.org/10.62053/gbjn2330

Handoko W; Pahlevani F; Singla I; Kumar H; Sahajwalla V, 2018, 'Waste-Based Surface Modification to Enhance Corrosion Resistance of Aluminium Bronze Alloy', in International Journal of Chemical & Material Science, IJSER, pp. 661 - 665, http://dx.doi.org/10.26190/unsworks/27004

Echeverria Encina CA; Pahlevani ; Sahajwalla , 2018, 'Interphase-interface characterization of novel engineered bio-composite systems with Scanning Electron Microscopy', International Convention Centre (ICC), Sydney Australia, presented at 19th International Microscopy Congress, International Convention Centre (ICC), Sydney Australia, 09 September 2018 - 14 September 2018, http://dx.doi.org/10.26190/unsworks/27207

Tanaka Y; Pahlevani F; Sahajwalla V, 2018, 'Agglomeration Behavior of Non-Metallic Inclusions in Liquid High Carbon Steel', in TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings, Phoenix, Arizona, USA, presented at TMS 2018 147th Annual Meeting & Exhibition, Phoenix, Arizona, USA, 11 March 2018 - 15 March 2018

Hossain R; Pahlevani F; Sahajwalla V, 2018, 'Solid State Phase Transformation Mechanism in High Carbon Steel Under Compressive Load and with Varying Cr Percent', in TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings, Springer, Cham, Phoenix, Arizona, USA, pp. 797 - 802, presented at TMS 2018 147th Annual Meeting & Exhibition, Phoenix, Arizona, USA, 11 March 2018 - 15 March 2018, http://dx.doi.org/10.1007/978-3-319-72526-0_75

Handoko W; Pahlevani F; Sahajwalla V, 2018, 'Effect of Retained Austenite Stability in Corrosion Mechanism of Dual Phase High Carbon Steel', Amsterdam, Netherlands, presented at 20th International Conference on Sustainable Materials and Structural Systems, Amsterdam, Netherlands, 22 January 2018 - 23 January 2018, http://dx.doi.org/10.26190/unsworks/26488

Handoko W; Pahlevani F; Sahajwalla V, 2018, 'Effect of Retained Austenite Stability in Corrosion Mechanism of Dual Phase High Carbon Steel', in International journal of materials and metallurgical Engineering, http://dx.doi.org/10.1999/1307-6892/10008308

Banerjee A; Pahlevani F; Sahajwalla V; Prusty G, 2017, 'Compressive deformation behaviour of high carbon steel at quasi-static strain rates', Sydney, Australia, presented at 9th Australasian Congress on Applied Mechanics (ACAM9), Sydney, Australia, 27 November 2017 - 29 November 2017

Pahlevani F; Echeverria Encina CA; Handoko W; Sahajwalla V, 2017, 'Mattresses and fabrics as new resources for innovative building material', Hunter Valley, NSW, presented at Australian Industrial Ecology Conference 2017, Hunter Valley, NSW, 06 September 2017 - 08 September 2017, http://dx.doi.org/10.26190/unsworks/27198

Back to profile page