By Associate Professor Wengui Li

Journal articles

Fan Y; Feng C; Hang Z; Shen L; Li W, 2025, 'Optimal design of electrical conductivity of hybrid multi-dimensional carbon fillers reinforced porous cement-based Composites: Experiment and modelling', Composite Structures, 352, http://dx.doi.org/10.1016/j.compstruct.2024.118714

Wang X; Guo Y; Tao Z; Shi L; Li W, 2024, 'Self-heating performance of phase change cementitious mortar with hybrid carbon-based nanomaterials', Journal of Energy Storage, 104, http://dx.doi.org/10.1016/j.est.2024.114495

Sun C; Li J; Liu Q; Chen K; Li W; Pan F, 2024, 'Compressive performance and damage mechanism of concrete short columns confined by steel wires reinforced 3DPM', Case Studies in Construction Materials, 21, http://dx.doi.org/10.1016/j.cscm.2024.e03457

Wang X; Huang Y; Shi L; Zhang S; Li W, 2024, 'Enhanced thermal performance of phase change mortar using multi-scale carbon-based materials', Journal of Building Engineering, 98, http://dx.doi.org/10.1016/j.jobe.2024.111259

Dong W; Gao S; Peng S; Shi L; Shah SP; Li W, 2024, 'Graphene reinforced cement-based triboelectric nanogenerator for efficient energy harvesting in civil infrastructure', Nano Energy, 131, http://dx.doi.org/10.1016/j.nanoen.2024.110380

Lei B; Kong L; Guo Y; Sun B; Li X; Wu K; Tam VW; Li W, 2024, 'Optimizing decarbonation and sustainability of concrete pavement: A case study', Case Studies in Construction Materials, 21, http://dx.doi.org/10.1016/j.cscm.2024.e03574

Gomes SDC; Nguyen QD; Li W; Castel A, 2024, 'Effects of mix composition on the mechanical, physical and durability properties of alkali-activated calcined clay/slag concrete cured under ambient condition', Construction and Building Materials, 453, http://dx.doi.org/10.1016/j.conbuildmat.2024.139064

Lu D; Qu F; Zhang C; Guo Y; Luo Z; Xu L; Li W, 2024, 'Innovative approaches, challenges, and future directions for utilizing carbon dioxide in sustainable concrete production', Journal of Building Engineering, 97, http://dx.doi.org/10.1016/j.jobe.2024.110904

Yang K; Long G; Tang Z; Li W; Ma G; Li C; Xie Y, 2024, 'Enhancing the flexural toughness of UHPC through flexible layer-modified aggregates: A novel interfacial toughening strategy', Cement and Concrete Composites, 154, http://dx.doi.org/10.1016/j.cemconcomp.2024.105770

Wu Q; Huang Y; Irga P; Kumar P; Li W; Wei W; Shon HK; Lei C; Zhou JL, 2024, 'Synergistic control of urban heat island and urban pollution island effects using green infrastructure', Journal of Environmental Management, 370, http://dx.doi.org/10.1016/j.jenvman.2024.122985

Lu Y; Xu Y; Meng L; Ouyang F; Cheng J; Duan P; Zhu Y; Li W; Zhang Z; Chen M; Huang W, 2024, 'Role of modified calcium montmorillonite and 5 A zeolite in microstructure and efflorescence formation of metakaolin-based geopolymer', Construction and Building Materials, 448, http://dx.doi.org/10.1016/j.conbuildmat.2024.138258

Sun L; Liu S; Zhao H; Muhammad U; Chen D; Li W, 2024, 'Dynamic performance of fiber-reinforced ultra-high toughness cementitious composites: A comprehensive review from materials to structural applications', Engineering Structures, 317, http://dx.doi.org/10.1016/j.engstruct.2024.118647

Liu Q; Cheng A; Sun C; Chen K; Wang Y; Li W, 2024, 'Effects of aggregate's type and orientation on stress concentration and crack propagation of modeled concrete applied a shear force', Journal of Building Engineering, 95, http://dx.doi.org/10.1016/j.jobe.2024.110340

Wang X; Li W; Guo Y; Kashani A; Wang K; Ferrara L; Agudelo I, 2024, 'Corrigendum to “Concrete 3D printing technology for sustainable construction: A review on raw material, concrete type and performance” [Dev. Built. Environ. 17 (2024) 100378] (Developments in the Built Environment (2024) 17, (S2666165924000590), (10.1016/j.dibe.2024.100378))', Developments in the Built Environment, 19, http://dx.doi.org/10.1016/j.dibe.2024.100442

Deng Z; Mahmood AH; Dong W; Sheng D; Lin X; Li W, 2024, 'Piezoresistive performance of self-sensing bitumen emulsion-cement mortar with multi-walled carbon nanotubes', Cement and Concrete Composites, 153, http://dx.doi.org/10.1016/j.cemconcomp.2024.105718

Yang K; Tang Z; Li W; Wu H; Ma G; Xiang Y; Xie Y; Long G, 2024, 'A systematic review on the evaluation methods for the flexural toughness of cement-based materials: From classification analysis to case study', Journal of Building Engineering, 93, http://dx.doi.org/10.1016/j.jobe.2024.109855

Qu F; Su Y; Lu D; Li N; Zeng X; Li W, 2024, 'Anti-cracking and shrinkage performance of sustainable concrete incorporating high-volume natural pozzolans: A case design for high-speed railway concrete slab tracks', Case Studies in Construction Materials, 20, http://dx.doi.org/10.1016/j.cscm.2024.e03207

Lei B; Yang W; Guo Y; Wang X; Xiong Q; Wang K; Li W, 2024, 'Interfacial adhesion between recycled aggregate and asphalt mastic filled with recycled concrete powder', Case Studies in Construction Materials, 20, http://dx.doi.org/10.1016/j.cscm.2023.e02721

Lei B; Li X; Guo Y; Qu F; Zhao C; Tam VWY; Wu V; Li W, 2024, 'Recycling of copper tailing as filler material in asphalt paving mastic: A sustainable solution for mining waste recovery', Case Studies in Construction Materials, 20, http://dx.doi.org/10.1016/j.cscm.2024.e03237

Ke Y; Zhang SS; Jedrzejko MJ; Lin G; Li WG; Nie XF, 2024, 'Strength models of near-surface mounted (NSM) fibre-reinforced polymer (FRP) shear-strengthened RC beams based on machine learning approaches', Composite Structures, 337, http://dx.doi.org/10.1016/j.compstruct.2024.118045

Xu Y; Lu Y; Meng L; Cheng J; Ouyang F; Duan P; Li W; Zhang H; Zhu Y; Zhang Z, 2024, 'Performance and heavy metal leaching of porous geopolymer based on solid wastes', Construction and Building Materials, 427, http://dx.doi.org/10.1016/j.conbuildmat.2024.136186

Wang Y; Xu J; Li W; Dong W, 2024, 'Improved conductive and self-sensing properties of cement concrete by PDMS/NCB-impregnated recycled fine aggregate', Construction and Building Materials, 426, http://dx.doi.org/10.1016/j.conbuildmat.2024.136229

Chen K; Liu Q; Chen B; Zhang S; Ferrara L; Li W, 2024, 'Effect of raw materials on the performance of 3D printing geopolymer: A review', Journal of Building Engineering, 84, http://dx.doi.org/10.1016/j.jobe.2024.108501

Lei B; Yu L; Guo Y; Xue H; Wang X; Zhang Y; Dong W; Dehn F; Li W, 2024, 'Triaxial mechanical behaviours and life cycle assessment of sustainable multi-recycled aggregate concrete', Science of the Total Environment, 923, http://dx.doi.org/10.1016/j.scitotenv.2024.171381

Li W; Guo Y; Zhang X; Dong W; Li X; Yu T; Wang K, 2024, 'Development of self-sensing ultra-high-performance concrete using hybrid carbon black and carbon nanofibers', Cement and Concrete Composites, 148, http://dx.doi.org/10.1016/j.cemconcomp.2024.105466

Lin X; Castel A; Deng Z; Dong B; Zhang X; Zhang S; Li W, 2024, 'Effect of crystalline admixtures on shrinkage and alkali-silica reaction of biochar-cementitious composites', Developments in the Built Environment, 18, http://dx.doi.org/10.1016/j.dibe.2024.100456

Lu D; Qu F; Punetha P; Zeng X; Luo Z; Li W, 2024, 'Graphene oxide nano-engineered recycled aggregate concrete for sustainable construction: A critical review', Developments in the Built Environment, 18, http://dx.doi.org/10.1016/j.dibe.2024.100444

Zhao H; Li W; Gan Y; Mahmood AH; Zhao X; Wang K, 2024, 'Nano- and Microscopic Investigation on the Strengthening Mechanism of ITZs Using Waste Glass Powder in Modeled Aggregate Concrete', Journal of Materials in Civil Engineering, 36, http://dx.doi.org/10.1061/JMCEE7.MTENG-16956

Wang X; Li W; Guo Y; Kashani A; Wang K; Ferrara L; Agudelo I, 2024, 'Concrete 3D printing technology for sustainable construction: A review on raw material, concrete type and performance', Developments in the Built Environment, 17, http://dx.doi.org/10.1016/j.dibe.2024.100378

Zhao H; Hu Y; Li Y; Wang K; Dehn F; Li W, 2024, 'Triaxial compressive performance of recycled aggregate/glass sand concrete: Experimental study and mechanism analysis', Journal of Cleaner Production, 442, http://dx.doi.org/10.1016/j.jclepro.2024.141006

Li Y; Zhao H; Hu Y; Qu F; Zhu D; Wang K; Li W, 2024, 'Effect of pore water pressure on mechanical performance of recycled aggregate concrete under triaxial compression', Cement and Concrete Composites, 146, http://dx.doi.org/10.1016/j.cemconcomp.2023.105402

Liu Q; Cheng S; Sun C; Chen K; Li W; Tam VWY, 2024, 'Steel cable bonding in fresh mortar and 3D printed beam flexural behavior', Automation in Construction, 158, http://dx.doi.org/10.1016/j.autcon.2023.105165

Qu F; Zhang Y; Zhu X; Xu W; Poon CS; Li W; Tsang DCW, 2024, 'Roles of wood waste biochar for chloride immobilization in GGBS-blended cement composites', Construction and Building Materials, 411, http://dx.doi.org/10.1016/j.conbuildmat.2023.134389

Zhan P; Wang J; Zhao H; Li W; Shah SP; Xu J, 2024, 'Impact of synthetic C-S-H seeds on early hydration and pore structure evolution of cement pastes: A study by ¹H low-field NMR and path analysis', Cement and Concrete Research, 175, http://dx.doi.org/10.1016/j.cemconres.2023.107376

Chen K; Qu F; Huang Y; Cai J; Wu F; Li W, 2024, 'Advancing photocatalytic concrete technologies in design, performance and application for a sustainable future', Advanced Nanocomposites, 1, pp. 180 - 200, http://dx.doi.org/10.1016/j.adna.2024.05.002

Lin X; Li W; Castel A; Kim T; Huang Y; Wang K, 2023, 'A comprehensive review on self-healing cementitious composites with crystalline admixtures: Design, performance and application', Construction and Building Materials, 409, pp. 134108, http://dx.doi.org/10.1016/j.conbuildmat.2023.134108

Zhou S; Lu Y; Pan Y; Li J; Qu F; Luo Z; Li W, 2023, 'Flowability prediction of recycled α-hemihydrate gypsum for 3D powder printing under combined effects of different glidants using response surface methodology', Developments in the Built Environment, 16, http://dx.doi.org/10.1016/j.dibe.2023.100265

Qu F; Zhao H; Wu K; Liu Y; Zhao X; Li W, 2023, 'Phase transformation and microstructure of in-situ concrete after 20-year exposure to harsh mining environment: A case study', Case Studies in Construction Materials, 19, http://dx.doi.org/10.1016/j.cscm.2023.e02287

Tang Z; Li W; Peng Q; Yan L, 2023, 'Quasi-Static Cyclic Behavior of CFRP-Confined Geopolymeric Composites', Journal of Composites for Construction, 27, http://dx.doi.org/10.1061/JCCOF2.CCENG-4138

Liu Q; Tang H; Chen K; Sun C; Li W; Jiao S; Tam VWY, 2023, 'Improving industrial drying process of recycled fine aggregates as a means of carbonation to improve the mechanical properties and plastic shrinkage of self-leveling mortar', Construction and Building Materials, 403, http://dx.doi.org/10.1016/j.conbuildmat.2023.133001

Lei B; Yu L; Guo Y; Mahmood AH; Qu F; Wang X; Li W, 2023, 'Failure behaviour and damage evolution of multi-recycled aggregate concrete under triaxial compression', Engineering Failure Analysis, 153, http://dx.doi.org/10.1016/j.engfailanal.2023.107572

Jahandari S; Tao Z; Alim MA; Li W, 2023, 'Integral waterproof concrete: A comprehensive review', Journal of Building Engineering, 78, http://dx.doi.org/10.1016/j.jobe.2023.107718

Ke G; Duanxiong K; Zhang X; Tang Z; Yang R; Li W, 2023, 'Synthesis of Quaternary Hydrotalcite-Carbon Nanotube Composite and Its Sulfate Adsorption Performance in Cement Paste', Journal of Materials in Civil Engineering, 35, http://dx.doi.org/10.1061/JMCEE7.MTENG-15248

Deng Z; Li W; Dong W; Sun Z; Kodikara J; Sheng D, 2023, 'Multifunctional asphalt concrete pavement toward smart transport infrastructure: Design, performance and perspective', Composites Part B: Engineering, 265, http://dx.doi.org/10.1016/j.compositesb.2023.110937

Ke Y; Shi FL; Zhang SS; Nie XF; Li WG, 2023, 'Strength Model for Debonding Failure in RC Beams Flexurally Strengthened with NSM FRP and Anchored with FRP U-Jackets', Journal of Composites for Construction, 27, http://dx.doi.org/10.1061/JCCOF2.CCENG-4215

Lin X; Li W; Guo Y; Dong W; Castel A; Wang K, 2023, 'Biochar-cement concrete toward decarbonisation and sustainability for construction: Characteristic, performance and perspective', Journal of Cleaner Production, 419, http://dx.doi.org/10.1016/j.jclepro.2023.138219

Gomes SDC; Nguyen QD; Li W; Castel A, 2023, 'Carbonation resistance of calcined clay-ground granulated blast furnace slag alkali-activated mortar', Construction and Building Materials, 393, http://dx.doi.org/10.1016/j.conbuildmat.2023.131811

Li P; Li W; Wang K; Zhao H; Shah SP, 2023, 'Hydration and microstructure of cement paste mixed with seawater – An advanced investigation by SEM-EDS method', Construction and Building Materials, 392, http://dx.doi.org/10.1016/j.conbuildmat.2023.131925

Zhao H; Li W; Gan Y; Wang K; Luo Z, 2023, 'Nano/microcharacterization and image analysis on bonding behaviour of ITZs in recycled concrete enhanced with waste glass powder', Construction and Building Materials, 392, http://dx.doi.org/10.1016/j.conbuildmat.2023.131904

Lei B; Yu H; Guo Y; Dong W; Liang R; Wang X; Lin X; Wang K; Li W, 2023, 'Fracture behaviours of sustainable multi-recycled aggregate concrete under combined compression-shear loading', Journal of Building Engineering, 72, http://dx.doi.org/10.1016/j.jobe.2023.106382

Back to profile page