By Dr Anthony Sexton

Journal articles

Sexton A; Doolan M, 2023, 'Effect of electrode misalignment on the quality of resistance spot welds', Manufacturing Letters, 35, pp. 952 - 957, http://dx.doi.org/10.1016/j.mfglet.2023.08.017

Zanjani NA; Sexton A; Kalyanasundaram S, 2015, 'Induced forming modes in a pre-consolidated woven polypropylene composite during stretch forming process at room temperature: I. Experimental studies', Composites Part A: Applied Science and Manufacturing, 68, pp. 251 - 263, http://dx.doi.org/10.1016/j.compositesa.2014.09.023

Sexton A; Cantwell W; Doolan M; Kalyanasundaram S, 2014, 'Investigation of the deformation behaviour of a thermoplastic fibre metal laminate', Materials Science Forum, 773-774, pp. 503 - 511, http://dx.doi.org/10.4028/www.scientific.net/MSF.773-774.503

Kalyanasundaram S; DharMalingam S; Venkatesan S; Sexton A, 2013, 'Effect of process parameters during forming of self reinforced - PP based Fiber Metal Laminate', Composite Structures, 97, pp. 332 - 337, http://dx.doi.org/10.1016/j.compstruct.2012.08.053

Sexton A; Cantwell W; Kalyanasundaram S, 2012, 'Stretch forming studies on a fibre metal laminate based on a self-reinforcing polypropylene composite', Composite Structures, 94, pp. 431 - 437, http://dx.doi.org/10.1016/j.compstruct.2011.08.004

Conference Papers

Wang WT; Venkatesan S; Sexton A; Kalyanasundaram S, 2014, 'Stamp forming of polypropylene based polymer-metal laminates: The effect of process parameters on spring back', in Advanced Materials Research, pp. 423 - 427, http://dx.doi.org/10.4028/www.scientific.net/AMR.875-877.423

Sexton A; Venkatesan S; Cantwell W; Kalyanasundaram S, 2012, 'Experimental and numerical characterisation of the out-of-plane stretch forming of a fibre metal laminate based on a self-reinforced polypropylene composite', in ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials

Sexton A; Cantwell W; Doolan M; Kalyanasundaram S, 2012, 'Experimental characterisation of the formability of a thermoplastic fibre metal laminate', in Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 933 - 941

Sexton A; Davey S; Cantwell W; Doolan M; Kalyanasundaram S, 2012, 'Finite element simulation of the stretch forming of annealed aluminium sheets', in Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 985 - 991

DharMalingam S; Sexton A; Venkatesan S; Kalyanasundaram S, 2012, 'Numerical investigation of the effect of temperature on the formability of a thermoplastic fibre metal laminate', in Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 267 - 275

Back to profile page