ORCID as entered in ROS
https://orcid.org/0000-0001-8473-2038
Select Publications
Conference Papers
, 2018, 'Sizing of a corrugated plate heat exchanger in a
bottoming organic Rankine cycle for waste heat
recovery of piston aero-engines', in Silva Freire AP; Hanjalić K; Suga K; Borello D; Hadžiabdić M (eds.), Proceedings of the Ninth International Symposium On Turbulence, Heat and Mass Transfer, Begell House, Inc., Rio de Janeiro, Brazil, presented at
, 2018, 'Logistics problems in the design of an asteroid mining industry', in Proceedings of the International Astronautical Congress, IAC
, 2017, 'Process improvement based on an integrated approach of DMAIC and multi-method simulation.', in Proceedings - 22nd International Congress on Modelling and Simulation, MODSIM 2017, Tasmania, pp. 291 - 297, presented at
, 2017, 'On the potential of organic Rankine cycles for recovering waste heat from the exhaust gases of a piston aero-engine', Seoul, Korea, presented at
, 2017, 'Mining Requirements for Asteroid Ore Extraction', in Proceedings of the 68th International Astronautical Congress 2017, Adelaide, Australia, pp. 10743 - 10752, presented at
, 2017, 'The limits of simulation in complex engineering systems', in Proceedings of the Australasian Simulation Congress 2017, Simulation Australia, Sydney, presented at
, 2017, 'A Possible Future Short Haul Airliner', in Proceedings of the 17th Australian International Aerospace Congress, Engineers Australia, Royal Aeronautical Society., Melbourne, Australia, pp. 255 - 231, presented at
, 2017, 'Energy harvesting in light aircraft using an organic Rankine bottoming cycle', in AIAC17 Proceedings, Engineers Australia, Royal Aeronautical Society, Melbourne, pp. 239 - 244, presented at
, 2017, 'Future platforms for air delivered ordnance', in 17th Australian International Aerospace Congress : AIAC 2017, Engineers Australia, Royal Aeronautical Society, Melbourne, Australia, pp. 252 - 255, presented at
, 2017, 'Application of particle-in-cell simulation techniques in the analysis and optimisation of magnetic nozzle geometries', in Proceedings of the International Astronautical Congress, IAC, pp. 1134 - 1140
, 2016, 'Hybridization of the powertrains of large commercial aircraft', in The 2016 Asia-Pacific International Symposium on Aerospace Technology, Toyama, Japan, presented at
, 2016, 'Architecture for an Asteroid Mining Industry', in 67th International Astronautical Congress, International Astronautical Federation, Guadalajara, Mexico, presented at
, 2016, 'Swarm mechanism for “Hedgehog” asteroid rover, using Netlogo simulations', Melbourne, presented at
, 2016, 'An AnyLogic Simulation Model for Performance and Risk Analysis of Six Sigma', Melbourne, presented at
, 2016, 'Spacecraft swarm positioning during asteroid flybys using relative Doppler and ranging', in AIAA/AAS Astrodynamics Specialist Conference, 2016, Long Beach, California, presented at
, 2016, 'Self-sufficiency in an MCHP system based on local demand and supply analysis', in Proceedings of ASME 2016 Power and Energy Conference PowerEnergy2016, Charlotte, NC, USA, presented at
, 2016, 'Estimations of the reduction in fuel consumption due to the hybridisation of the powertrain of a light aircraft', Istanbul TURKEY, presented at
, 2016, 'Spacecraft swarm positioning during asteroid flybys using relative doppler and ranging', in AIAA/AAS Astrodynamics Specialist Conference, 2016, http://dx.doi.org/10.2514/6.2016-5516
, 2016, 'Suppressing restricted shock separation in a subscale rocket nozzle using contour geometry', in Journal of Propulsion and Power, pp. 1297 - 1300, http://dx.doi.org/10.2514/1.B36059
, 2015, 'Adopting Lean Six Sigma to AnyLogic Simulation in a Manufacturing Environment', in 21st International Congress on Modelling and Simulation (MODSIM2015), Gold Coast , Australia, presented at
, 2015, 'Aerospace Design – A New World Thanks to Digital Technology', in APISAT 2015 Proceedings, Engineers Australia, Cairns, Queensland, pp. 98 - 103, presented at
, 2015, 'Exergy analysis of a light propeller driven hybrid powered aircraft', in APISAT 2015 proceedings, in preparation, Cairns, Queensland, Australia, presented at
, 2015, 'Trajectory Design and Econocic Analysis of Asteroid Mining Missions to Asteroid 2014 EK24', in Third International Future Mining Conference, The Australasian Institute of Mining and Metallurgy, Sydney, Australia, pp. 281 - 287, presented at
, 2015, 'Small body mass estimation from spacecraft swarm dynamics', Jerusalem, Israel, presented at
, 2015, 'Trajectory Opportunities to Arjuna-type Asteroids for Asteroid Mining Missions', in Proceedings of the International Astronautical Congress, IAC, Jerusalem, Israel, presented at
, 2015, 'Strategy for flybys of numerous Earth passing asteroids', in Short W; Caprarelli G (ed.), Proceedings of the 15th Australian Space Research Conference, Canberra, pp. 273 - 284, presented at
, 2015, 'Smart control of an MCHP unit combined with thermal and electrical storage systems: A case study', Vienna, Austria, presented at
, 2015, 'The potential for games engines to simulate dynamics about
an asteroid', in Monaghan M (ed.), Simulation Australasia, Adelaide, pp. 332 - 338, presented at
, 2015, 'Are we simulated beings in a holographic universe?', in Monaghan M (ed.), SimTecT and SimHealth 2015 Conference Proceedings, Simulation Australasia, Adelaide Convention Centre, South Australia, pp. 287 - 291, presented at
, 2015, 'Suppressing restricted shock separation in thrust-optimized rocket nozzles using contour geometry', in Valeanu M (ed.), Orlando, FL, presented at
, 2015, 'Design of an Arc-Based Thrust-Optimised Nozzle Contour', in Galfetti L; Frolov S; Haidn O (eds.), Progress in Propulsion Physics – Volume 11, EDP Sciences, Krakow, Poland, pp. 517 - 528, presented at
, 2015, 'Reducing fuel consumption in light aircraft by partial electrification of the powertrain', in Karakoc TH; Ozerdem MB; Sogut MZ; Altuntas O; Acikkalp E (eds.), Proceeding book of the international symposium on sustainable aviation 2015, Republic of Turkey Ministry of Culture and Tourism Department of Libraries and Publication, Istanbul, Turkey, pp. 19 - 23, presented at
, 2015, 'Design of a Light, Four-Seat, Zero-Emissions Aircraft', in Proceedings of the 16th Australian International Aerospace Congress, RMIT Informit, Melbourne, Vic, presented at
, 2015, 'Comparison of numerical methods for the analysis of expansion-deflection nozzle', in Sinha A (ed.), Proceedings of the 16th Australian International Aerospace Congress, RMIT Informit, Melbourne, Victoria, presented at
, 2015, 'The work potential two-spool, gas turbine, aircraft engines', in Sinha A (ed.), Proceedings of the 16th Australian International Aerospace Congress, RMIT Informit, Melbourne, Victoria, presented at
, 2015, 'Numerical Analysis of a Linear Expansion-Deflection Nozzle at Open Wake Conditions', Melbourne, Australia, presented at
, 2015, 'IAC-15-B4.8.10 Small body mass estimation from spacecraft swarm flyby dynamics', in Proceedings of the International Astronautical Congress, IAC, pp. 4839 - 4845
, 2014, 'Experimental Analysis of a Linear Expansion-Deflection Nozzle at Highly Overexpanded Conditions', in Chowdhury H (ed.), The Proceedings of the 19th Australasian Fluid Mechanics Conference, Melbourne, Australia, presented at
, 2014, 'Robotic swarms as means to autonomously and rapidly characterise small celestial bodies', in Short W; Cairns I (ed.), Proceedings of the 14th Australian Space Research Conference, Adelaide, pp. 147 - 155, presented at
, 2014, 'Simulation of spacecraft about collinear Lagrange points of small bodies in the Solar System', in Fisher A (ed.), SimTect 2014 Conference Proceedings, Simulation Australia, Adelaide, Australia, pp. 313 - 318, presented at
, 2014, 'Simulation of a micro-cogeneration system: How the warm-up
phase affects efficiency', in SimTecT2014 Conference Proceedings, Simulation Australia, Adelaide Convention Centre, South Australia, pp. 319 - 325, presented at
, 2014, 'Design of High Area Nozzle Contours using Circular Arcs', in Valeanu M (ed.), Propulsion and Energy Forum 50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA, Cleveland, OH, presented at
, 2014, 'Geometric Analysis of the Linear Expansion-Deflection Nozzle at Highly Overexpanded Flow Conditions', in 50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference Proceedings, Cleveland, OH, presented at
, 2014, 'Experimental analysis of a linear expansion-deflection nozzle at highly overexpanded conditions', in Proceedings of the 19th Australasian Fluid Mechanics Conference, AFMC 2014
, 2013, 'Computational simulation of an altitude adaptive nozzle concept', in Applied Mechanics and Materials, University of Sydney, Australia, presented at
, 2013, 'Computational analysis of pintle variation in an expansion-deflection nozzle', in Short W; Cairns I (ed.), Proceedings of the 13th Australian Space Science Conference, National Space Society of Australia Ltd, University of New South Wales, Sydney, Australia, pp. 261 - 272, presented at
, 2013, 'Dynamic Modelling Of A Co-/Trigeneration System: The Advantages Of Simulation Over Experimentation', in Crossing Boundaries, Brisbane, QLD, pp. 133 - 138, presented at
, 2013, 'Dynamic modelling of a co-generation system: the advantages of simulation over experimentation', in SimTecT 2013 Conference Proceedings : Crossing Boundaries, Brisbane, presented at
, 2013, 'A hybrid propulsion system for a light trainer aircraft', in Proceedings of 15th AIAC, EA & RAeS, Melbourne, pp. 1 - 6, presented at
, 2013, 'Investigating pintle geometry in expansion-deflection nozzles', in Proceedings of 15th AIAC, EA & RAeS, Melbourne, pp. 1 - 9, presented at
Filter by type
https://orcid.org/0000-0001-8473-2038