Select Publications

Journal articles

Kirkwood HJ; de Jonge MD; Muránsky O; Hofmann F; Howard DL; Ryan CG; van Riessen G; Rowles MR; Paradowska AM; Abbey B, 2018, 'Simultaneous X-ray diffraction, crystallography and fluorescence mapping using the Maia detector', Acta Materialia, 144, pp. 1 - 10, http://dx.doi.org/10.1016/j.actamat.2017.10.025

Yang C; Muránsky O; Zhu H; Thorogood GJ; Avdeev M; Huang H; Zhou X; Muransky O, 2017, 'The effect of milling time on the microstructural characteristics and strengthening mechanisms of NiMo-SiC Alloys prepared via powder metallurgy', Materials, 10, pp. 389, http://dx.doi.org/10.3390/ma10040389

Li L; Muránsky O; Flores-Johnson EA; Kabra S; Shen L; Proust G, 2017, 'Effects of strain rate on the microstructure evolution and mechanical response of magnesium alloy AZ31', Materials Science and Engineering: A, 684, pp. 37 - 46, http://dx.doi.org/10.1016/j.msea.2016.12.015

Yang C; Muránsky O; Zhu H; Thorogood GJ; Huang H; Zhou X, 2017, 'On the origin of strengthening mechanisms in Ni-Mo alloys prepared via powder metallurgy', Materials and Design, 113, pp. 223 - 231, http://dx.doi.org/10.1016/j.matdes.2016.10.024

Hosseinzadeh F; Traore Y; Bouchard PJ; Muránsky O, 2016, 'Mitigating cutting-induced plasticity in the contour method, part 1: Experimental', International Journal of Solids and Structures, 94-95, pp. 247 - 253, http://dx.doi.org/10.1016/j.ijsolstr.2015.12.034

Muránsky O; Hamelin CJ; Hosseinzadeh F; Prime MB, 2016, 'Mitigating cutting-induced plasticity in the contour method. Part 2: Numerical analysis', International Journal of Solids and Structures, 94-95, pp. 254 - 262, http://dx.doi.org/10.1016/j.ijsolstr.2015.12.033

Olson MD; Hill MR; Patel VI; Muránsky O; Sisneros T, 2015, 'Measured biaxial residual stress maps in a stainless steel weld', Journal of Nuclear Engineering and Radiation Science, 1, http://dx.doi.org/10.1115/1.4029927

Olson MD; Hill MR; Willis E; Peterson AG; Patel VI; Muránsky O, 2015, 'Assessment of weld residual stress measurement precision: Mock-up design and results for the contour method', Journal of Nuclear Engineering and Radiation Science, 1, http://dx.doi.org/10.1115/1.4029413

Muránsky O; Hamelin CJ; Patel VI; Luzin V; Braham C, 2015, 'The influence of constitutive material models on accumulated plastic strain in finite element weld analyses', International Journal of Solids and Structures, 69-70, pp. 518 - 530, http://dx.doi.org/10.1016/j.ijsolstr.2015.04.032

Hamelin CJ; Muránsky O; Smith MC; Holden TM; Luzin V; Bendeich PJ; Edwards L, 2014, 'Validation of a numerical model used to predict phase distribution and residual stress in ferritic steel weldments', Acta Materialia, 75, pp. 1 - 19, http://dx.doi.org/10.1016/j.actamat.2014.04.045

Muránsky O; Smith MC; Bendeich PJ; Hosseinzadeh F; Edwards L, 2014, 'Numerical analysis of retained residual stresses in C(T) specimen extracted from a multi-pass austenitic weld and their effect on crack growth', Engineering Fracture Mechanics, 126, pp. 40 - 53, http://dx.doi.org/10.1016/j.engfracmech.2014.04.008

Muránsky O; Holden TM; Kirstein O; James JA; Paradowska AM; Edwards L, 2013, 'Evaluation of residual stresses in electron-beam welded Zr2.5Nb0.9Hf Zircadyne flange mock-up of a reflector vessel beam tube flange', Journal of Nuclear Materials, 438, pp. 154 - 162, http://dx.doi.org/10.1016/j.jnucmat.2013.02.045

Muránsky O; Daymond MR; Bhattacharyya D; Zanellato O; Vogel SC; Edwards L, 2013, 'Load partitioning and evidence of deformation twinning in dual-phase fine-grained Zr-2.5%Nb alloy', Materials Science and Engineering: A, 564, pp. 548 - 558, http://dx.doi.org/10.1016/j.msea.2012.11.075

Bendeich PJ; Muránsky O; Hamelin CJ; Smith MC; Edwards L, 2012, 'Validated numerical analysis of residual stresses in safety relief valve (SRV) nozzle mock-ups: Influence of axial restraint on distortion and residual stress predictions', Computational Materials Science, 62, pp. 285 - 288, http://dx.doi.org/10.1016/j.commatsci.2012.05.042

Flores-Johnson EA; Muránsky O; Hamelin CJ; Bendeich PJ; Edwards L, 2012, 'Numerical analysis of the effect of weld-induced residual stress and plastic damage on the ballistic performance of welded steel plate', Computational Materials Science, 58, pp. 131 - 139, http://dx.doi.org/10.1016/j.commatsci.2012.02.009

Muránsky O; Smith MC; Bendeich PJ; Holden TM; Luzin V; Martins RV; Edwards L, 2012, 'Comprehensive numerical analysis of a three-pass bead-in-slot weld and its critical validation using neutron and synchrotron diffraction residual stress measurements', International Journal of Solids and Structures, 49, pp. 1045 - 1062, http://dx.doi.org/10.1016/j.ijsolstr.2011.07.006

Muránsky O; Hamelin CJ; Smith MC; Bendeich PJ; Edwards L, 2012, 'The effect of plasticity theory on predicted residual stress fields in numerical weld analyses', Computational Materials Science, 54, pp. 125 - 134, http://dx.doi.org/10.1016/j.commatsci.2011.10.026

Muránsky O; Smith MC; Bendeich PJ; Edwards L, 2011, 'Validated numerical analysis of residual stresses in Safety Relief Valve (SRV) nozzle mock-ups', Computational Materials Science, 50, pp. 2203 - 2215, http://dx.doi.org/10.1016/j.commatsci.2011.02.031

Muránsky O; Barnett MR; Luzin V; Vogel S, 2010, 'On the correlation between deformation twinning and Lüders-like deformation in an extruded Mg alloy: In situ neutron diffraction and EPSC.4 modelling', Materials Science and Engineering: A, 527, pp. 1383 - 1394, http://dx.doi.org/10.1016/j.msea.2009.10.018

Muránsky O; Barnett MR; Carr DG; Vogel SC; Oliver EC, 2010, 'Investigation of deformation twinning in a fine-grained and coarse-grained ZM20 Mg alloy: Combined in situ neutron diffraction and acoustic emission', Acta Materialia, 58, pp. 1503 - 1517, http://dx.doi.org/10.1016/j.actamat.2009.10.057

Muránsky O; Carr DG; Šittner P; Oliver EC, 2009, 'In situ neutron diffraction investigation of deformation twinning and pseudoelastic-like behaviour of extruded AZ31 magnesium alloy', International Journal of Plasticity, 25, pp. 1107 - 1127, http://dx.doi.org/10.1016/j.ijplas.2008.08.002

Muránsky O; Carr DG; Barnett MR; Oliver EC; Šittner P, 2008, 'Investigation of deformation mechanisms involved in the plasticity of AZ31 Mg alloy: In situ neutron diffraction and EPSC modelling', Materials Science and Engineering: A, 496, pp. 14 - 24, http://dx.doi.org/10.1016/j.msea.2008.07.031

Muránsky O; Šittner P; Zrník J; Oliver EC, 2008, 'In situ neutron diffraction investigation of the collaborative deformation-transformation mechanism in TRIP-assisted steels at room and elevated temperatures', Acta Materialia, 56, pp. 3367 - 3379, http://dx.doi.org/10.1016/j.actamat.2008.03.026

Zrnik J; Muransky O; Stejskal O; Lukáš P; Hornak P, 2008, 'Effect of processing conditions on structure development and mechanical response of Si-Mn 'TRIP' steel', Materials Science and Engineering: A, 483-484, pp. 71 - 75, http://dx.doi.org/10.1016/j.msea.2006.09.148

Jenčuš P; Polák J; Lukáš P; Muránsky O, 2006, 'In situ neutron diffraction study of the low cycle fatigue of the α-γ duplex stainless steel', Physica B: Condensed Matter, 385-386 I, pp. 597 - 599, http://dx.doi.org/10.1016/j.physb.2006.06.109

Muránsky O; Lukáš P; Zrník J; Šittner P, 2006, 'Neutron diffraction analysis of retained austenite stability in Mn-Si steel during plastic deformation', Physica B: Condensed Matter, 385-386 I, pp. 587 - 589, http://dx.doi.org/10.1016/j.physb.2006.05.367

Zrník J; Muránsky O; Lukáš P; Nový Z; Sittner P; Horňak P, 2006, 'Retained austenite stability investigation in TRIP steel using neutron diffraction', Materials Science and Engineering: A, 437, pp. 114 - 119, http://dx.doi.org/10.1016/j.msea.2006.04.067

Xu PG; Tomota Y; Lukáš P; Muránsky O; Adachi Y, 2006, 'Austenite-to-ferrite transformation in low alloy steels during thermomechanically controlled process studied by in situ neutron diffraction', Materials Science and Engineering: A, 435-436, pp. 46 - 53, http://dx.doi.org/10.1016/j.msea.2006.06.002

Zrnik J; Mamuzić I; Lukaš P; Muransky O; Jenčuš P; Novy Z, 2006, 'Design of thermo mechanical processing and transformation behaviour of bulk Si-Mn trip steel', Metalurgija, 45, pp. 85 - 91

Koo MS; Xu PG; Li JH; Tomota Y; Muransky O; Lukas P; Adachi Y, 2006, 'In situ neutron diffraction during thermo-mechanically controlled process in low alloy steels', Solid State Phenomena, 118, pp. 419 - 424, http://dx.doi.org/10.4028/www.scientific.net/SSP.118.419

Zrnik J; Strunz P; Vrchovinsky V; Muransky O; Novy Z; Wiedenmann A, 2004, 'Degradation of creep properties in a long-term thermally exposed nickel base superalloy', Materials Science and Engineering: A, 387-389, pp. 728 - 733, http://dx.doi.org/10.1016/j.msea.2004.02.100

Zrnik J; Strunz P; Vrchovinsky V; Muransky O; Hornak P; Wiedenmann A, 2004, 'Creep deformation and microstructural examination of a prior thermally exposed nickel base superalloy', Key Engineering Materials, 274-276, pp. 925 - 930, http://dx.doi.org/10.4028/www.scientific.net/kem.274-276.925


Back to profile page