By Dr Ondrej Muransky

Journal articles

Reiner J; Narain D; Zhang P; Flores-Johnson EA; Muransky O, 2023, 'Progressive fracture testing of Carbon–Carbon composites', Ceramics International, 49, pp. 6451 - 6458, http://dx.doi.org/10.1016/j.ceramint.2022.10.198

Choi J; Bortolan Neto L; Wright RN; Kruzic JJ; Muránsky O; Muransky O, 2022, 'On the prediction of creep behaviour of alloy 617 using Kachanov-Rabotnov model coupled with multi-objective genetic algorithm optimisation', International Journal of Pressure Vessels and Piping, 199, pp. 104721, http://dx.doi.org/10.1016/j.ijpvp.2022.104721

Dobroň P; Drozdenko D; Maric M; Muránsky O, 2022, 'On the plasticity of a hot-rolled Zircolay-4 via a combination of in-situ acoustic emission and ex-situ EBSD techniques', Materials Science and Engineering: A, 852, http://dx.doi.org/10.1016/j.msea.2022.143688

Wu B; Qiu Z; Dong B; Muránsky O; Zhu H; Wang Z; Pan Z; Li H, 2022, 'Microstructural characterisation and hardness assessment of wire arc cladded Hastelloy C276 on creep resistant steel P91', Journal of Materials Research and Technology, 19, pp. 3818 - 3827, http://dx.doi.org/10.1016/j.jmrt.2022.06.129

Wang Z; Muránsky O; Zhu H; Wei T; Zhang Z; Ionescu M; Yang C; Davis J; Hu G; Munroe P; Windes W, 2022, 'Impact of pre-existing crystal lattice defects on the accumulation of irradiation-induced damage in a C/C composite', Journal of Nuclear Materials, 564, http://dx.doi.org/10.1016/j.jnucmat.2022.153684

Akrivos V; Muransky O; Depradeux L; Smith MC; Vasileiou A; Deaconu V; Kapadia P, 2022, 'On the Accurate Prediction of Residual Stress in a Three‐Pass Slot Nickel‐Base Repair Weld by Numerical Simulations', Journal of Manufacturing and Materials Processing, 6, http://dx.doi.org/10.3390/jmmp6030061

Chen L; Wang Z; Zhu H; Burr PA; Qu J; Huang Y; Balogh L; Preuss M; Muránsky O; Muransky O, 2022, 'On the microstructure and high-temperature stability of nano-grained Zircaloy-4', Scripta Materialia, 210, pp. 114410, http://dx.doi.org/10.1016/j.scriptamat.2021.114410

Zhou D; Bu Y; Muránsky O; Geng H; Sun B; Yang C; Zhang D, 2022, 'Annealing-induced strengthening and stabilization in ultrafine-grained Al and Al–Mg alloys prepared by rapid powder consolidation', Materials Science and Engineering: A, 833, http://dx.doi.org/10.1016/j.msea.2021.142539

Dong B; Wang Z; Zhu H; Muránsky O; Qiu Z; Shen C; Pan Z; Li H, 2022, 'Low neutron cross-section FeCrVTiNi based high-entropy alloys: design, additive manufacturing and characterization', Microstructures, 2, http://dx.doi.org/10.20517/microstructures.2021.09

Zhang C; Qiu Z; Zhu H; Wang Z; Muránsky O; Ionescu M; Pan Z; Xi J; Li H, 2022, 'On the effect of heat input and interpass temperature on the performance of inconel 625 alloy deposited using wire arc additive manufacturing–cold metal transfer process', Metals, 12, http://dx.doi.org/10.3390/met12010046

Lee M; Muránsky O; Karatchevtseva I; Huang H; Laws KJ, 2021, 'Corrosion performance of Ni-based structural alloys for applications in molten-salt based energy systems: Experiment & numerical validation', Corrosion Science, 190, http://dx.doi.org/10.1016/j.corsci.2021.109607

Qiu Z; Wu B; Wang Z; Wexler D; Carpenter K; Zhu H; Muránsky O; Zhang J; Li H, 2021, 'Effects of post heat treatment on the microstructure and mechanical properties of wire arc additively manufactured Hastelloy C276 alloy', Materials Characterization, 177, http://dx.doi.org/10.1016/j.matchar.2021.111158

Danon AE; Muránsky O; Zhu H; Wei T; Flores-Johnson EA; Li ZJ; Kruzic JJ; Muransky O; Flores Johnson EA, 2021, 'The effect of microstructure and welding-induced plasticity on the strength of Ni–Mo–Cr alloy welds', Materialia, 17, pp. 101126, http://dx.doi.org/10.1016/j.mtla.2021.101126

Zhu H; Muránsky O; Wei T; Davis J; Budzakoska-Testone E; Huang H; Drew M, 2021, 'The effect of applied stress on the high-temperature creep behaviour and microstructure of NiMoCr Hastelloy-N® alloy', Materialia, 16, http://dx.doi.org/10.1016/j.mtla.2021.101069

Huang H; Liu J; Lei G; Muránsky O; Wei T; Ionescu M, 2021, 'Effect of tellurium (Te⁴⁺) irradiation on microstructure and associated irradiation-induced hardening', Chinese Physics B, 30, http://dx.doi.org/10.1088/1674-1056/abf039

Zhu Z; Huang H; Muránsky O; Liu J; Zhu Z; Huang Y, 2021, 'On the irradiation tolerance of nano-grained Ni–Mo–Cr alloy: 1 MeV He⁺ irradiation experiment', Journal of Nuclear Materials, 544, http://dx.doi.org/10.1016/j.jnucmat.2020.152694

Dong B; Wang Z; Pan Z; Muránsky O; Shen C; Reid M; Wu B; Chen X; Li H, 2021, 'On the development of pseudo-eutectic AlCoCrFeNi2.1 high entropy alloy using Powder-bed Arc Additive Manufacturing (PAAM) process', Materials Science and Engineering: A, 802, http://dx.doi.org/10.1016/j.msea.2020.140639

Zhu H; Wang Z; Muránsky O; Davis J; Yu S; Kent D; Wang G; Dargusch MS, 2021, 'The characterisation and formation of novel microstructural features in a Ti−Nb−Zr−Mo−Sn alloy manufactured by Laser Engineered Net Shaping (LENS)', Additive Manufacturing, 37, http://dx.doi.org/10.1016/j.addma.2020.101705

Achouri A; Hosseinzadeh F; Bouchard PJ; Paddea S; Muransky O, 2021, 'The incremental contour method using asymmetric stiffness cuts', Materials and Design, 197, http://dx.doi.org/10.1016/j.matdes.2020.109268

Huang Q; Shi R; Muránsky O; Beladi H; Kabra S; Schimpf C; Volkova O; Biermann H; Mola J, 2020, 'Author Correction: Neutron diffraction analysis of stress and strain partitioning in a two-phase microstructure with parallel-aligned phases (Scientific Reports, (2020), 10, 1, (13536), 10.1038/s41598-020-70299-1)', Scientific Reports, 10, http://dx.doi.org/10.1038/s41598-020-74028-6

Best JP; Ostergaard HE; Li B; Stolpe M; Yang F; Nomoto K; Hasib MT; Muránsky O; Busch R; Li X; Kruzic JJ; Muransky O, 2020, 'Fracture and fatigue behaviour of a laser additive manufactured Zr-based bulk metallic glass', Additive Manufacturing, 36, pp. 101416, http://dx.doi.org/10.1016/j.addma.2020.101416

Huang Q; Shi R; Muránsky O; Beladi H; Kabra S; Schimpf C; Volkova O; Biermann H; Mola J, 2020, 'Neutron diffraction analysis of stress and strain partitioning in a two-phase microstructure with parallel-aligned phases', Scientific Reports, 10, http://dx.doi.org/10.1038/s41598-020-70299-1

Douzian G; Muránsky O; Kruzic JJ; Wright RN; Payten W; Muransky O, 2020, 'Assessment of modelling methodologies for prediction of high-temperature creep-fatigue behaviour of Alloy 617', International Journal of Pressure Vessels and Piping, 187, pp. 104150, http://dx.doi.org/10.1016/j.ijpvp.2020.104150

Muránsky O; Karatchevtseva I; Danon AE; Holmes R; Huai P; Zhang Z, 2020, 'Impact of dislocations and dislocation substructures on molten salt corrosion of alloys under plasticity-imparting conditions', Corrosion Science, 176, http://dx.doi.org/10.1016/j.corsci.2020.108915

Smith H; Linke BS; Muránsky O; Hamelin C; Hill MR, 2020, 'Assessment of mechanical properties and microstructure characterizing techniques in their ability to quantify amount of cold work in 316l alloy', Journal of Engineering Materials and Technology, Transactions of the ASME, 142, http://dx.doi.org/10.1115/1.4047024

Qiu Z; Wu B; Zhu H; Wang Z; Hellier A; Ma Y; Li H; Muransky O; Wexler D, 2020, 'Microstructure and mechanical properties of wire arc additively manufactured Hastelloy C276 alloy', Materials and Design, 195, http://dx.doi.org/10.1016/j.matdes.2020.109007

Akrivos V; Wimpory RC; Hofmann M; Stewart B; Muransky O; Smith MC; Bouchard J, 2020, 'Neutron diffraction measurements of weld residual stresses in three-pass slot weld (Alloy 600/82) and assessment of the measurement uncertainty', Journal of Applied Crystallography, 53, pp. 1181 - 1194, http://dx.doi.org/10.1107/S1600576720009140

Wang Z; Muránsky O; Zhu H; Wei T; Sokolova A; Short K; Wright RN, 2020, 'On the kinetics of gamma prime (γ’) precipitation and its strengthening mechanism in Alloy 617 during a long-term thermal aging', Materialia, 11, http://dx.doi.org/10.1016/j.mtla.2020.100682

Danon AE; Muránsky O; Karatchevtseva I; Zhang Z; Li ZJ; Scales N; Kruzic JJ; Edwards L; Muransky O, 2020, 'Molten salt corrosion (FLiNaK) of a Ni–Mo–Cr alloy and its welds for application in energy-generation and energy-storage systems', Corrosion Science, 164, pp. 108306, http://dx.doi.org/10.1016/j.corsci.2019.108306

Muránsky O; Zhu H; Lim SL; Short K; Cairney J; Drew M, 2020, 'On the evolution of mechanical properties and microstructure of ferritic-bainitic (FB) 2.25Cr-1Mo (Grade 22) steel during high-temperature creep', Materialia, 9, http://dx.doi.org/10.1016/j.mtla.2019.100513

Wang H; Geng H; Zhou D; Niitsu K; Muránsky O; Zhang D, 2020, 'Multiple strengthening mechanisms in high strength ultrafine-grained Al–Mg alloys', Materials Science and Engineering: A, 771, http://dx.doi.org/10.1016/j.msea.2019.138613

Kan K; Muránsky O; Bendeich PJ; Wright RN; Kruzic JJ; Payten W; Muransky O, 2019, 'Assessment of creep damage models in the prediction of high-temperature creep behaviour of Alloy 617', International Journal of Pressure Vessels and Piping, 177, pp. 103974, http://dx.doi.org/10.1016/j.ijpvp.2019.103974

Sarvghad M; Muránsky O; Steinberg TA; Hester J; Hill MR; Will G, 2019, 'On the effect of cold-rolling on the corrosion of SS316L alloy in a molten carbonate salt', Solar Energy Materials and Solar Cells, 202, http://dx.doi.org/10.1016/j.solmat.2019.110136

Zhou D; Wang H; Muránsky O; Kong C; Yang C; Zhang D, 2019, 'On the Formation of Nanoscale Intergranular Intermetallic Compound Films in a Cu-5 at. pct Zr Alloy', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50, pp. 4569 - 4581, http://dx.doi.org/10.1007/s11661-019-05360-4

Muránsky O; Yang C; Zhu H; Karatchevtseva I; Sláma P; Nový Z; Edwards L, 2019, 'Molten salt corrosion of Ni-Mo-Cr candidate structural materials for Molten Salt Reactor (MSR) systems', Corrosion Science, 159, http://dx.doi.org/10.1016/j.corsci.2019.07.011

Zhou D; Wang H; Saxey DW; Muránsky O; Geng H; Rickard WDA; Quadir Z; Yang C; Reddy SM; Zhang D, 2019, 'Hall–Petch Slope in Ultrafine Grained Al-Mg Alloys', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50, pp. 4047 - 4057, http://dx.doi.org/10.1007/s11661-019-05329-3

Muránsky O; Balogh L; Tran M; Hamelin CJ; Park JS; Daymond MR, 2019, 'On the measurement of dislocations and dislocation substructures using EBSD and HRSD techniques', Acta Materialia, 175, pp. 297 - 313, http://dx.doi.org/10.1016/j.actamat.2019.05.036

Murphy GL; Wang CH; Zhang Z; Kowalski PM; Beridze G; Avdeev M; Muransky O; Brand HEA; Gu QF; Kennedy BJ, 2019, 'Controlling Oxygen Defect Formation and Its Effect on Reversible Symmetry Lowering and Disorder-to-Order Phase Transformations in Nonstoichiometric Ternary Uranium Oxides', Inorganic Chemistry, 58, pp. 6143 - 6154, http://dx.doi.org/10.1021/acs.inorgchem.9b00406

Smith MC; Muránsky O; Xiong Q; Bouchard PJ; Mathew J; Austin C, 2019, 'Validated prediction of weld residual stresses in austenitic steel pipe girth welds before and after thermal ageing, part 1: Mock-up manufacture, residual stress measurements, and materials characterisation', International Journal of Pressure Vessels and Piping, 172, pp. 233 - 250, http://dx.doi.org/10.1016/j.ijpvp.2019.01.004

Xiong Q; Smith MC; Muransky O; Mathew J, 2019, 'Validated prediction of weld residual stresses in austenitic steel pipe girth welds before and after thermal ageing, part 2: Modelling and validation', International Journal of Pressure Vessels and Piping, 172, pp. 430 - 448, http://dx.doi.org/10.1016/j.ijpvp.2019.02.002

Tremsin AS; Sokolova AV; Salvemini F; Luzin V; Paradowska A; Muransky O; Kirkwood HJ; Abbey B; Wensrich CM; Kisi EH, 2019, 'Energy-resolved neutron imaging options at a small angle neutron scattering instrument at the Australian Center for Neutron Scattering', Review of Scientific Instruments, 90, http://dx.doi.org/10.1063/1.5081909

Yang C; Muránsky O; Zhu H; Karatchevtseva I; Holmes R; Avdeev M; Jia Y; Huang H; Zhou X, 2018, 'Corrosion performance of Ni-16%wt.Mo-X%wt.SiC alloys in FLiNaK molten salt', Corrosion Science, 143, pp. 240 - 248, http://dx.doi.org/10.1016/j.corsci.2018.08.036

Maric M; Muránsky O; Karatchevtseva I; Ungár T; Hester J; Studer A; Scales N; Ribárik G; Primig S; Hill MR; Muransky O, 2018, 'The effect of cold-rolling on the microstructure and corrosion behaviour of 316L alloy in FLiNaK molten salt', Corrosion Science, 142, pp. 133 - 144, http://dx.doi.org/10.1016/j.corsci.2018.07.006

Zhou D; Wang X; Muránsky O; Wang X; Xie Y; Yang C; Zhang D, 2018, 'Heterogeneous microstructure of an Al2O3 dispersion strengthened Cu by spark plasma sintering and extrusion and its effect on tensile properties and electrical conductivity', Materials Science and Engineering: A, 730, pp. 328 - 335, http://dx.doi.org/10.1016/j.msea.2018.06.010

Muránsky O; Tran M; Hamelin CJ; Shrestha SL; Bhattacharyya D, 2018, 'Assessment of welding-induced plasticity via electron backscatter diffraction', International Journal of Pressure Vessels and Piping, 164, pp. 32 - 38, http://dx.doi.org/10.1016/j.ijpvp.2017.04.001

Muránsky O; Hamelin CJ; Hosseinzadeh F; Prime MB, 2018, 'Evaluation of a self-equilibrium cutting strategy for the contour method of residual stress measurement', International Journal of Pressure Vessels and Piping, 164, pp. 22 - 31, http://dx.doi.org/10.1016/j.ijpvp.2017.04.002

Muránsky O; Hosseinzadeh F; Hamelin CJ; Traore Y; Bendeich PJ, 2018, 'Investigating optimal cutting configurations for the contour method of weld residual stress measurement', International Journal of Pressure Vessels and Piping, 164, pp. 55 - 67, http://dx.doi.org/10.1016/j.ijpvp.2017.04.006

Smith MC; Muránsky O; Austin C; Bendeich P; Xiong Q, 2018, 'Optimised modelling of AISI 316L(N) material behaviour in the NeT TG4 international weld simulation and measurement benchmark', International Journal of Pressure Vessels and Piping, 164, pp. 93 - 108, http://dx.doi.org/10.1016/j.ijpvp.2017.11.004

Yang C; Wei T; Muránsky O; Carr D; Huang H; Zhou X, 2018, 'The effect of ball-milling time and annealing temperature on fracture toughness of Ni-3 wt.% SiC using small punch testing', Materials Characterization, 138, pp. 289 - 295, http://dx.doi.org/10.1016/j.matchar.2018.02.024

Kirkwood HJ; de Jonge MD; Muránsky O; Hofmann F; Howard DL; Ryan CG; van Riessen G; Rowles MR; Paradowska AM; Abbey B, 2018, 'Simultaneous X-ray diffraction, crystallography and fluorescence mapping using the Maia detector', Acta Materialia, 144, pp. 1 - 10, http://dx.doi.org/10.1016/j.actamat.2017.10.025

Back to profile page