Select Publications
Book Chapters
1995, 'Shock Wave/Boundary Layer Interaction in High-Enthalpy Compression Corner Flow', in Shock Waves @ Marseille I, Springer Berlin Heidelberg, pp. 87 - 92, http://dx.doi.org/10.1007/978-3-642-78829-1_13
,Journal articles
2023, 'Effectiveness of the dispersed-phase continuum model for investigating the airflow in the print gap of inkjet printers', Physical Review Fluids, 8, http://dx.doi.org/10.1103/PhysRevFluids.8.094302
,2023, 'Conjugate Heat Transfer in Thermal Inkjet Printheads', Fluids, 8, http://dx.doi.org/10.3390/fluids8030088
,2022, 'Three-dimensional numerical simulation of air-flow in inkjet print-zones', International Journal of Heat and Fluid Flow, 93, http://dx.doi.org/10.1016/j.ijheatfluidflow.2021.108911
,2022, 'Investigation of the vortex instability in a two-dimensional inkjet print-zone using numerical analysis', Physical Review Fluids, 7, http://dx.doi.org/10.1103/PhysRevFluids.7.013904
,2020, 'Leading-edge bluntness effects in hypervelocity flat plate flow', Physics of Fluids, 32, http://dx.doi.org/10.1063/1.5138205
,2019, 'Three ways to compute multiport inertance', ANZIAM Journal, 60, pp. C140 - C155, http://dx.doi.org/10.21914/anziamj.v60i0.14058
,2013, 'Development of some hypersonic benchmark flows using CFD and experiment', Shock Waves, 12, pp. 375 - 384, http://dx.doi.org/10.1007/s00193-003-0179-0
,2006, 'Heat transfer measurement of turbulent spots in a hypersonic blunt-body boundary layer', Journal of Fluid Mechanics, 555, pp. 81 - 111, http://dx.doi.org/10.1017/S0022112006009396
,2004, 'Analysis of hot-wire anemometry data obtained in a synthetic jet flow', Experimental Thermal and Fluid Science, 28, pp. 265 - 272, http://dx.doi.org/10.1016/j.expthermflusci.2003.05.001
,2003, 'Numerical Simulation of Micro-Fabricated Zero Mass-Flux Jet Actuators', Sensors and Actuators, 105, pp. 229 - 236
,2001, 'The Interaction between a Compressible Synthetic Jet and a Laminar Hypersonic Boundary Layer', Flow, Turbulence and Combustion, 66, pp. 1 - 21, http://dx.doi.org/10.1023/A:1011468910521
,2001, 'An experimental and numerical study of synthetic jet flow', Aeronautical Journal, 105, pp. 41 - 49, http://dx.doi.org/10.1017/S0001924000095968
,2000, 'Gun tunnel flow calibration: Defining input conditions for hypersonic flow computations', Shock Waves, 10, pp. 313 - 322, http://dx.doi.org/10.1007/s001930000064
,2000, 'Temperature measurements in a hypersonic boundary layer using planar laser-induced fluorescence', AIAA journal, 38, pp. 1769 - 1772, http://dx.doi.org/10.2514/2.1172
,2000, 'Temperature measurements in a hypersonic boundary layer using planar laser-induced fluorescence', AIAA Journal, 38, pp. 1769 - 1772, http://dx.doi.org/10.2514/3.14612
,1997, 'The boundary layer on a flat plate in hypervelocity flow (vol 100, pg 135, 1996)', AERONAUTICAL JOURNAL, 101, pp. 276 - 276, https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:A1997XQ87000006&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
,1997, 'An experimental Investigation of Hypervelocity Flow in a Conical Nozzle', Journal of Applied Science Research, pp. 81 - 93
,1997, 'Establishment of Steady Separated Flow over a Compression Corner in a Free-Piston Shock Tunnel', Shock Waves, pp. 249 - 253
,1997, 'The interaction of a shock wave with a laminar boundary layer at a compression corner in high-enthalpy flows including real gas effects.', Journal of Fluid Mechanics, pp. 1 - 35
,1996, 'An experimental investigation of hypervelocity flow in a conical nozzle', Flow, Turbulence and Combustion, 57, pp. 81 - 93
,, 1996, 'Leading-edge bluntness effects in high enthalpy, hypersonic compression corner flow', AIAA Journal, 34, pp. 2284 - 2290, http://dx.doi.org/10.2514/3.13392
1996, 'The boundary layer on a flat plate in hupervelocity flow', Aeronautical Journal, 100, pp. 135 - 141
,1996, 'Upstream influence and peak heating in hypervelcotiy shock wave/Boundary layer interaction', Journal of Propulsion and Power, 12, pp. 984 - 990
,Conference Papers
2020, 'Hydraulic Resistance and Inertance of Multi-Port Vessels', in 22nd Australasian Fluid Mechanics Conference, AFMC 2020, http://dx.doi.org/10.14264/e9afca2
,2020, 'Three-Dimensional Numerical Simulation of Air-Flow in Inkjet Print-Zones', in 22nd Australasian Fluid Mechanics Conference, AFMC 2020, University of Queensland Library, presented at Proceedings of the 22nd Australasian Fluid Mechanics Conference AFMC2020, http://dx.doi.org/10.14264/45fd9cf
,2020, 'Two-dimensional numerical simulation of inkjet print-zone flows', in 22nd Australasian Fluid Mechanics Conference, AFMC 2020, University of Queensland Library, presented at Proceedings of the 22nd Australasian Fluid Mechanics Conference AFMC2020, http://dx.doi.org/10.14264/c646e40
,2018, 'Impulsively generated incompressible two-phase flow and the ASAI thermal ink-jet model', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018
,2018, 'Impulsively generated incompressible two-phase flow and the ASAI thermal ink-jet model', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018
,2018, 'Simulation of droplet impact and spreading using a simple dynamic contact angle model', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018
,2018, 'Simulation of droplet impact and spreading using a simple dynamic contact angle model', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018
,2016, 'Suppressing tiger stripes: Taming flow oscillations to improve print quality', in Proceedings of the 20th Australasian Fluid Mechanics Conference, AFMC 2016
,2016, 'Viscosity and surface tension of aqueous mixtures', in Proceedings of the 20th Australasian Fluid Mechanics Conference, AFMC 2016
,2004, 'Influence of synthetic jet location on boundary layer separation control', in Proceedings of SPIE - The International Society for Optical Engineering, pp. 230 - 239, http://dx.doi.org/10.1117/12.523270
,2004, 'Three dimensional numerical simulations of synthetic jet actuator flows in a microchannel', in Proceedings of SPIE - The International Society for Optical Engineering, pp. 341 - 350, http://dx.doi.org/10.1117/12.521732
,2003, 'A piezoelectrically actuated micro synthetic jet for active flow control', in Sensors and Actuators, A: Physical, pp. 168 - 174, http://dx.doi.org/10.1016/S0924-4247(03)00267-X
,2002, 'Effectiveness of synthetic jets enhanced by instability of Tollmien-Schlichting waves', in 1st Flow Control Conference
,2000, 'The operation and application of synthetic jet actuators', in Fluids 2000 Conference and Exhibit, American Institute of Aeronautics and Astronautics, presented at Fluids 2000 Conference and Exhibit, http://dx.doi.org/10.2514/6.2000-2402
,1999, 'Synthetic jet actuators for flow control', in Proceedings of SPIE - The International Society for Optical Engineering, pp. 146 - 156
,1999, 'Preliminary analysis of a long stroke natural gas engine based on LSRM', in SAE Technical Papers, http://dx.doi.org/10.4271/1999-01-2895
,1999, 'Some characteristics of synthetic jets', in 30th Fluid Dynamics Conference
,1998, 'A combined experimental-numerical study of heat transfer in turbulent hypersonic flow', in Proceedings of the 1998 Thirteenth Australasian Fluid Mechanics Conference, Melbourne, Australia, 13-18 December 1998, pp. 55 - 58
,1998, 'Numerical study of flow in a rotating shock tube', in Proceedings of the 1998 Thirteenth Australasian Fluid Mechanics Conference, Melbourne, Australia, 13-18 December 1998, pp. 563 - 566
,1998, 'Planar laser-induced fluorescence thermometry in a hypersonic boundary layer flow', in Proceedings of the 1998 Thirteenth Australasian Fluid Mechanics Conference, Melbourne, Australia, 13-18 December 1998, pp. 559 - 562
,1997, 'An experimental and numerical study of hypersonic turbulent boundary layer flows', in 15th Applied Aerodynamics Conference, American Institute of Aeronautics and Astronautics, presented at 15th Applied Aerodynamics Conference, http://dx.doi.org/10.2514/6.1997-2290
,1995, 'High Enthalpy hypersonic compression corner flow', in AIAA American Institute of Aeronautics and Astronautics Journal, American Inst Aeronaut Astronaut, Reston, VA, USA, presented at AIAA Aerospace Sciences Meeting, Nevada, 11 January 1995 - 14 January 1995
,1995, 'High enthalpy, hypersonic compression corner flow', in 33rd Aerospace Sciences Meeting and Exhibit, http://dx.doi.org/10.2514/6.1995-155
,1992, 'LAMINAR FLOWS OF HIGH ENTHALPY AIR IN A COMPRESSION CORNER', in Davis MR; Walker GJ (ed.), ELEVENTH AUSTRALASIAN FLUID MECHANICS CONFERENCE, VOLS 1 AND 2, UNIVERSITY TASMANIA, AUSTRALIA, UNIV TASMANIA, HOBART, pp. 275 - 278, presented at 11th Australasian Fluid Mechanics Conference, AUSTRALIA, UNIV TASMANIA, HOBART, 14 December 1992 - 18 December 1992, https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:A1992BB94T00066&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
,