By Dr Xiaopeng Li

Conference Papers

Liang Z; Sun Z; Lv X; Thalakotuna DN; Esselle KP; Li X; Yang Y, 2025, 'Antenna Array with Memory Metal for CubeSats Applications', in 2025 6th Australian Microwave Symposium, AMS 2025 - Conference Proceedings, http://dx.doi.org/10.1109/AMS63679.2025.10937854

Cao Z; Liu Y; Kruzic JJ; Li X, 2024, 'An Image-Driven Machine Learning Method for Microstructure Characterization in Metal Additive Manufacturing: Generative Adversarial Network', in 44TH RISO INTERNATIONAL SYMPOSIUM ON MATERIALS SCIENCE, RISO 2024, IOP PUBLISHING LTD, DENMARK, Roskilde, presented at 44th Riso International Symposium on Materials Science (RISO), DENMARK, Roskilde, 02 September 2024 - 06 September 2024, http://dx.doi.org/10.1088/1757-899X/1310/1/012015

Li X; Wang X; Qu C; Song J; Li H; Xi Y, 2024, 'Vehicle pose estimation by parking AGV based on RGBD camera', in Proceedings - 2024 9th International Conference on Automation, Control and Robotics Engineering, CACRE 2024, pp. 389 - 394, http://dx.doi.org/10.1109/CACRE62362.2024.10635074

Zhu J; Li X; Yang Y, 2021, 'Conductive and Dielectric Fully-Integrated 3D Printed Dual-Band Millimeter-Wave Fresnel Zone Plate Lens', in 2021 International Symposium on Antennas and Propagation, ISAP 2021, http://dx.doi.org/10.23919/ISAP47258.2021.9614439

Li XP; Dadbakhsh S; Vanmeensel K; Vleugels J; van Humbeeck J; Kruth JP, 2020, 'Tailoring commercially pure titanium using Mo2C during selective laser melting', in Solid Freeform Fabrication 2017: Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2017, pp. 160 - 166

Li X; Van Humbeeck J; Kruth JP, 2016, 'The influence of preheating on the phase formation and texture of commercially pure titanium fabricated by selective laser melting', Nürnberg, Germany, presented at 6th International Conference on Additive Technologies iCAT 2016, Nürnberg, Germany, 29 November 2016 - 30 November 2016

Reid M; Sercombe T; Paradowska A; Li X; Li X, 2016, 'Residual stresses in Selective Laser Melted components of different geometries', Sydney, Australia, presented at The 10th International Conference on Residual Stresses, Sydney, Australia, 03 July 2016 - 07 July 2016

Li X; Astfalack L; Drew P; Sercombe T, 2016, 'Selective laser melting of Aluminium metal matrix composites', Singapore, presented at The 2nd International Conference on PRO-AM Progress in Additive Manufacturing, Singapore, 16 May 2016 - 19 May 2016

Yan M; Li X; Yu P; Schaffer GB; Qian M, 2010, 'Microstructural assessment of the oxidation behavior of Cu-based metallic glass powder', in Mater. Sci. Forum, Cairns, QLD, pp. 1054 - 1057, http://dx.doi.org/10.4028/www.scientific.net/MSF.654-656.1054

Back to profile page