ORCID as entered in ROS
https://orcid.org/0000-0003-0718-3324
Select Publications
Conference Papers
, 2018, 'The effect of streamwise pressure distribution on the aeroelastic deformation of hypersonic trailing-edge flaps', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018
, 2018, 'The effect of streamwise pressure distribution on the aeroelastic deformation of hypersonic trailing-edge flaps', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018
, 2018, 'Two way coupled hypersonic fluid structure interaction simulations with Eilmer', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018
, 2018, 'Using radiative heating to perform fluid-thermal-structural interaction experiments in a short-duration hypersonic wind tunnel', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018
, 2017, 'Enhanced Experimental Measurements of a Gas Turbine Compressor Rotor Analogue Undergoing Thermal Bow', Manchester, UK, presented at
, 2017, 'The influence of descent and taxi profiles on the thermal state of a jet engine at shutdown', Manchester, UK, presented at
, 2017, 'Global three-dimensional surrogate modeling of gas turbine aerodynamic performance', in Proceedings of the ASME Turbo Expo, Charlotte, North Carolina, USA, presented at
, 2017, 'Numerical study of the influence of non-uniform wall temperature distribution on the hypersonic flow over a flat plate', in 21st AIAA International Space Planes and Hypersonics Technologies Conference, Hypersonics 2017
, 2017, 'Numerical study of the influence of non-uniform wall temperature distribution on the hypersonic flow over a flat plate', in 21st AIAA International Space Planes and Hypersonics Technologies Conference, Hypersonics 2017, http://dx.doi.org/10.2514/6.2017-2427
, 2017, 'Reproducing non-uniform surface temperature profiles on hypersonic cruise vehicles in impulsive wind tunnels', in 21st AIAA International Space Planes and Hypersonics Technologies Conference, Hypersonics 2017
, 2017, 'Reproducing non-uniform surface temperature profiles on hypersonic cruise vehicles in impulsive wind tunnels', in 21st AIAA International Space Planes and Hypersonics Technologies Conference, Hypersonics 2017, http://dx.doi.org/10.2514/6.2017-2194
, 2017, 'Simulation of hypersonic free flight dynamics and support module separation of the HEXAFLY-INT glider', in Proceedings of the International Astronautical Congress, IAC, pp. 9484 - 9491
, 2016, 'Fluidic Thrust Vector Control for Rendezvous Missions', in Proceedings of the International Astronautical Congress, IAC, Guadalajara, Mexico, presented at
, 2016, 'Turbine blade life prediction using fluid-Thermal-structural interaction simulation', in Proceedings of the ASME Turbo Expo, AMER SOC MECHANICAL ENGINEERS, Seoul, SOUTH KOREA, presented at
, 2016, 'Experimental observations of thermal bow due to natural convection on a gas turbine compressor rotor shaft analogue', in Proceedings of the ASME Turbo Expo, http://dx.doi.org/10.1115/GT2016-56800
, 2016, 'Free flight testing in hypersonic flows: HEXAFLY-INT EFTV', in 54th AIAA Aerospace Sciences Meeting, http://dx.doi.org/10.2514/6.2016-1152
, 2016, 'Measurement and simulation of hypersonic fluid-structural interaction on a cantilevered plate in a mach 6 flow', in 15th Dynamics Specialists Conference, http://dx.doi.org/10.2514/6.2016-1088
, 2016, 'Numerical and experimental research on aerodynamics of a high-speed passenger vehicle within the HEXAFLY-INT project', in 30th Congress of the International Council of the Aeronautical Sciences, ICAS 2016
, 2016, 'Suppressing restricted shock separation in a subscale rocket nozzle using contour geometry', in Journal of Propulsion and Power, pp. 1297 - 1300, http://dx.doi.org/10.2514/1.B36059
, 2015, 'Analytical Models for Side Force Prediction of Fluidic Thrust Vectoring on High-Speed Vehicles', Phoenix, presented at
, 2015, 'Stereolithographic 3D Printed Nozzles for Cold Gas Propulsion Experiments', UNSW Canberra, presented at
, 2015, 'Suppressing restricted shock separation in thrust-optimized rocket nozzles using contour geometry', in Valeanu M (ed.), Orlando, FL, presented at
, 2015, 'A Concept for a Recoverable Microsatellite', in Nakasuka S (ed.), Kobe, Japan, presented at
, 2015, 'Design of an Arc-Based Thrust-Optimised Nozzle Contour', in Galfetti L; Frolov S; Haidn O (eds.), Progress in Propulsion Physics – Volume 11, EDP Sciences, Krakow, Poland, pp. 517 - 528, presented at
, 2015, 'Development of a Blade Parametric Modeling Methodology for Design and Analysis of Computer Experiments', in Volume 2B: Turbomachinery, American Society of Mechanical Engineers, presented at
, 2015, 'Separation and Reattachment in Laminar Hypersonic Flow', Toulouse - France, presented at
, 2015, 'Numerical Analysis of a Linear Expansion-Deflection Nozzle at Open Wake Conditions', Melbourne, Australia, presented at
, 2015, 'Numerical Investigation of Bluntness Effects on Hypersonic Leading Edge Separation', in unknown (ed.), presented at
, 2015, 'A system study on fluidic thrust vectoring', in 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, 2015
, 2015, 'A system study on fluidic thrust vectoring', in 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, 2015, http://dx.doi.org/10.2514/6.2015-3565
, 2015, 'Development of a blade parametric modeling methodology for design and analysis of computer experiments', in Proceedings of the ASME Turbo Expo, http://dx.doi.org/10.1115/GT201543109
, 2015, 'Measurement of vehicle stability coefficients in hypersonic wind tunnels', in 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, 2015
, 2015, 'Measurement of vehicle stability coefficients in hypersonic wind tunnels', in 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, 2015, http://dx.doi.org/10.2514/6.2015-3690
, 2015, 'Re-entry trajectory modelling for the microgravity experiment recoverable satellite', in 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, 2015
, 2015, 'The effect of compressor shaft geometry on shaft thermal bow due to natural convection', in Proceedings of the ASME Turbo Expo, http://dx.doi.org/10.1115/GT2015-42940
, 2015, 'The oxford high density tunnel', in 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, 2015, http://dx.doi.org/10.2514/6.2015-3548
, 2015, 'The oxford high density tunnel', in 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, 2015, http://dx.doi.org/10.2514/6.2015-3548
, 2015, 'Turbine blade life prediction using fluid-thermal-structural interaction modelling', in Proceedings of the ASME Turbo Expo, http://dx.doi.org/10.1115/GT2015-43071
, 2014, 'Heat Transfer and Temperature Prediction of the gas turbine stage using fluid-thermal-structural interaction', in Alam F; Chowdhury H (ed.), Proceedings of the 19th Australian Fluid Mechanics Conference, Melbourne, presented at
, 2014, 'A new method for prescribing non-uniform wall temperatures on wind tunnel models', in The Proceedings of the 19th Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Melbourne, Australia, presented at
, 2014, 'Experimental Analysis of a Linear Expansion-Deflection Nozzle at Highly Overexpanded Conditions', in Chowdhury H (ed.), The Proceedings of the 19th Australasian Fluid Mechanics Conference, Melbourne, Australia, presented at
, 2014, 'Fluid-Thermal-Structural Interaction of a fin in hypersonic flow', in The Proceedings of the 19th Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Melbourne, Australia, presented at
, 2014, 'Global measurement of temperature and pressure on the sidewall of an
altitude-adaptive expansion-deflection rocket nozzle', in Alam F; Chowdhury H (ed.), Proceedings of the Ninteenth Australasian Fluid Mechanics Conference, Melbourne, Australia, presented at
, 2014, 'Global Surrogate Modelling of Gas Turbine Aerodynamic Performance', in The Proceedings of the 19th Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Melbourne, Australia, presented at
, 2014, 'Hypersonic Leading Edge Separation', in unknown (ed.), Proceedings of the Ninteenth Australasian Fluid Mechanics Conference, presented at
, 2014, 'The Use of Porosity to Simulate the Presence of Aerofoils on a Gas Turbine Shaft under Natural Cooling', in Chowdhury H; Alam F (ed.), The Proceedings of the 19th Australasian Fluid Mechanics Conference, RMIT, Melbourne, presented at
, 2014, 'Thermo-fluid-structural analysis of the Oxford High Density Tunnel', in The Proceedings of the 19th Australasian Fluid Mechanics Conference, Melbourne, Australia, presented at
, 2014, 'The Effect of Vacuum on Shock Vector Control Performance', in Chowdhury H (ed.), Proceedings of the Ninteenth Australasian Fluid Mechanics Conference, Melbourne, Australia, presented at
, 2014, 'Geometric Analysis of the Linear Expansion-Deflection Nozzle at Highly Overexpanded Flow Conditions', in 50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference Proceedings, Cleveland, OH, presented at
, 2014, 'Biomechanics of chiasmal compression: Sensitivity of the mechanical behaviours of nerve fibres to variations in material property and geometry', in 11th World Congress on Computational Mechanics, WCCM 2014, 5th European Conference on Computational Mechanics, ECCM 2014 and 6th European Conference on Computational Fluid Dynamics, ECFD 2014, pp. 1688 - 1697
Filter by type
https://orcid.org/0000-0003-0718-3324