By Professor Michael Ferry

Conference Papers

Laws KJ; Gun B; Ferry M, 2007, 'The production and elevated temperature characteristics of Ca65 Mg15 Zn20 bulk metallic glass', in Materials Forum, Institute of Materials Engineering, Australasia Ltd, pp. 132 - 135

Laws KJ; Gun B; Ferry M, 2007, 'The production and elevated temperature properties of Ca65 Mg15 Zn20 bulk metallic glass', in Materials Science Forum, Trans Tech Publications Ltd, pp. 1263 - 1266

Laws KJ; Gun B; Ferry M, 2006, 'Elevated temperature mechanical behaviour of Mg-based amorphous alloys produced by low-pressure die-casting', in 4th International symposium on Bulk Metallic Glasses, San Antonio, Texas, presented at 4th International symposium on Bulk Metallic Glasses, San Antonio, Texas, 12 March 2006 - 16 March 2006

Laws KJ; Gun B; Ferry M, 2006, 'Production of high quality bulk metallic glass components by low pressure die Casting', in 4th International symposium on Bulk Metallic Glasses, San Antonio, Texas, presented at 4th International symposium on Bulk Metallic Glasses, San Antonio, Texas, 12 March 2006 - 16 March 2006

Burhan N; Ferry M, 2006, 'Changes in grain size distribution of a submicron grained Al-Sc alloy during high temperature annealing', in Materials Science Forum, Trans Tech Publications Ltd, pp. 1617 - 1622

Ferry M, 2006, 'Spatial uniformity of the rate of grain coarsening in a submicron Al-Sc alloy produced by severe plastic deformation', in Materials Science Forum, Trans Tech Publications Ltd, pp. 251 - 256

Ferry M, 2005, 'Uniformity of grain coarsening in a submicron grained Al-Sc alloy containing local variations in texture', in Materials Science Forum, Trans Tech Publications Ltd, Zurich-Uetikon, Switzerland, presented at 14th International Conference on Textures of Materials, Leuven, Belgium, 11 July 2005 - 14 July 2005

Ferry M; Humphreys FJ, 2005, 'A study of the early stages of recovery in cold rolled {110} oriented copper single crystals', in Materials Science Forum, Trans Tech Publications Ltd, pp. 761 - 766

Xu W; Ferry M, 2005, 'Influence of starting microstructure on texture development in cold rolled and annealed low carbon steel strip', in Materials Science Forum, Trans Tech Publications Ltd, pp. 519 - 524

Marceau RK; Ferry M, 2004, 'Hot tensile ductility and dynamic grain growth in Al-Sc and Al-Mg-Sc alloys', in 9th International conference on aluminium alloys ( ICAA-9), Brisbane, Qld, presented at 9th International conference on aluminium alloys ( ICAA-9), Brisbane, Qld, 02 August 2004 - 05 August 2004

Hamilton NE; Ferry M; Hamilton , 2004, 'Particle pinning in a nanocrystalline Al-Sc alloy', in 9th International conference on aluminium alloys ( ICAA-9), Brisbane, Qld, presented at 9th International conference on aluminium alloys ( ICAA-9), Brisbane, Qld, 02 August 2004 - 05 August 2004

Hamilton NE; Burhan N; Ferry M; Hamilton , 2004, 'Grain growth inhibition in a nanocrystalline AI-Sc alloy', in Zhu YT (ed.), Ultrafine grained Materials III, Charlotte, North Carolina, USA, pp. 635 - 640, presented at Ultrafine grained Materials III, Charlotte, North Carolina, USA, 14 March 2004 - 18 March 2004, http://www.sciencedirect.com/science/article/B6WPV-4CWS48R-PF/2/03d52d161489657ecb859c09cc7a3bbb

Ferry M; Hunter A, 2002, 'Factors affecting the fibre texture in strip-cast stainless steels', in 13th International Conference on Textures of Materials, Seoul, South Korea, presented at 13th International Conference on Textures of Materials, Seoul, South Korea, 24 August 2002 - 28 August 2002

Ferry M, 2002, 'mechanism of discontinuous subgrain growth in aluminium', in 13th International Conference on Textures of Materials, Seoul, South Korea, presented at 13th International Conference on Textures of Materials, Seoul, South Korea, 24 August 2002 - 28 August 2002

Ferry M; Munroe PR, 2002, 'Recrystallized grain size in particulate reinforced metal matrix composites', in ACUN-4 Composite Systems Macrocomposites, Microcomposites and Nanocomposites, Sydney, presented at ACUN-4 Composite Systems Macrocomposites, Microcomposites and Nanocomposites, Sydney, 21 July 2002 - 25 July 2002

Ferry M, 2002, 'Mechanism of discontinuous subgrain growth in as-deformed aluminium single crystals', in Materials Science Forum, pp. 979 - 984, http://dx.doi.org/10.4028/www.scientific.net/msf.408-412.979

Hunter A; Ferry M, 2001, 'Ferrite Distribution in as-cast AISI 304 Austenitic Stainless Steel Strip', in 6th World Congress of Chemical Engineering, Melbourne, presented at 6th Workd Congress of Chemical Engineering, Melbourne, 23 September 2001 - 26 September 2001

Hunter A; Ferry M; Strezov L, 2001, 'Variables Affecting the Microstructure and Texture of as-cast aisi 304 stainless steel strip', in 6th World Congress of Chemical Engineering, Melbourne, presented at 6th Workd Congress of Chemical Engineering, Melbourne, 23 September 2001 - 26 September 2001

Ferry M; Hunter A; Strezov L; Mukunthan K, 2001, 'Influence of titanium inoculation on the microstructure of as-cast ferritic stainless steel strip', in EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne, presented at EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne

Ferry M; Stanford N; Dunne DP, 2001, 'Periodic nucleation of recrystallized grains in deformed Al single crystals', in Gottstein G; Molodov DA (ed.), 1st Joint International Conference on Recrystallization and Grain Growth, Germany, pp. 861 - 866, presented at 1st Joint International Conference on Recrystallization and Grain Growth, Germany

Ferry M, 2001, 'Phase formation in as-cast AISI 304 stainless steel strip', in EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne, presented at EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne

Ferry M, 2001, 'Secondary processing of strip-cast low carbon steel', in EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne, presented at EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne

Ferry M, 2001, 'Solidification behaviour of as-cast AISI 304 austenitic stainless steel strip', in EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne, presented at EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne

Stanf ; Ferry M, 2000, 'Critical criterion for particle stimulated nucleation after hot deformation of an Al-Si alloy, C24', in 21st International Ris? Symposium on Materials Science, presented at 21st International Ris? Symposium on Materials Science

Manohar PA; Shivathaya SS; Ferry M; Chandra T, 1999, 'Development of an integrated system for designing steelmaking aim compositions', in Proceedings of the 2nd International Conference on Intelligent Processing and Manufacturing of Materials, IPMM 1999, pp. 105 - 110, http://dx.doi.org/10.1109/IPMM.1999.792459

Muljono D; Ferry M; Dunne DP, 1997, 'High-rate induction annealing of cold rolled low carbon steel sheet', in Mechanical Working and Steel Processing Conference Proceedings, pp. 667 - 672

Ferry M; Munroe PR; Crosky A; Chandra T, 1993, 'Effect of particulate distribution on the grain size distribution in an aluminum 2014/Al2O3 PMMC', in Proceedings of the International Conference on Advanced Composite Materials, pp. 1259 - 1264

Conference Proceedings (Editor of)

Ferry M, (ed.), 2001, 'Materials Forum - Annual Review Journal of Institute of Materials Engineering, Australasia', Australia, presented at Materials Forum - Annual Review Journal of Institute of Materials Engineering, Australasia, Australia

Ferry M, (ed.), 2000, 'Australasia, The Institute of Materials Engineering, Australasia, edition - Materials and processes in the 21st century', presented at Australasia, The Institute of Materials Engineering, Australasia, edition - Materials and processes in the 21st century

Conference Presentations

Mahjoub R; laws ; ferry , 2017, 'Hydrogen and amorphous alloys: friends or foes?', presented at RQ16, Leoben, Austria, 27 August 2017 - 01 September 2017, http://rq16.unileoben.ac.at/de/5774/

Mahjoub R; Laws KJ; Ferry M, 2014, 'Ab initio Calculation of Configurational and Vibrational Entropies of Amorphous Alloys', presented at 3rd biennial conference of the Combined Australian Materials Societies, Sydney, Australia, 26 November 2014 - 28 November 2014

Conference Abstracts

Brown AD; Wang F; Laws KJ; Eakins D; Chapman DJ; Hazell PJ; Ferry M; Escobedo JP, 2015, 'Effect of chemical composition on the shock response of Zr-based metallic glasses', in APS Shock Compression of Condensed Matter Meeting Abstracts, Vol. 1, pp. 6002 - 6002

Wang F; Laws KJ; Trujillo CP; Brown AD; Cerreta EK; Hazell PJ; Quadir MZ; Ferry M; Escobedo JP, 2015, 'Effects of chemical composition and test conditions on the dynamic tensile response of Zr-based metallic glasses', in APS Shock Compression of Condensed Matter Meeting Abstracts, Vol. 1, pp. 1051 - 1051

Software / Code

Hamilton NE; Ferry M, 2018, ggtern: An Extension to 'ggplot2', for the Creation of Ternary Diagrams, CRAN, https://cran.r-project.org/web/packages/ggtern/index.html, Plotting Software, Published: 19 December 2018, Software / Code, http://dx.doi.org/10.26190/unsworks/26152

Preprints

Chen Y; Tang C; Laws K; Zhu Q; Ferry M, 2023, Zr-Co-Al bulk metallic glass composites containing B2 ZrCo via rapid quenching and annealing, http://dx.doi.org/10.48550/arxiv.2310.15521

Tang C; Peng H; Chen Y; Ferry M, 2019, Formation and dilatation of shear bands in a Cu-Zr metallic glass: A free volume perspective, http://dx.doi.org/10.48550/arxiv.1901.05137

Tang C; Yi J; Xu W; Ferry M, 2019, Temperature rise in shear bands in a simulated metallic glass, http://dx.doi.org/10.48550/arxiv.1901.05141

Tang C; Laws K; Ferry M, 2019, Atomistic origin of stress overshoots and serrations in a CuZr metallic glass, http://dx.doi.org/10.48550/arxiv.1901.05129

Hanaor DAH; Xu W; Ferry M; Sorrell CC, 2013, Abnormal grain growth of rutile TiO2 induced by ZrSiO4, http://dx.doi.org/10.48550/arxiv.1303.2761

Back to profile page