Select Publications
Conference Papers
, 2022, 'Challenges of robotic disassembly in practice', in Procedia CIRP, Leuven, Belgium, pp. 513 - 518, presented at
, 2022, 'An ontology-based product usage context modeling method for smart customization', in Procedia CIRP, Virtual event, pp. 641 - 646, presented at
, 2021, 'A comparative LCA method for environmentally friendly manufacturing: Additive manufacturing versus Machining case', in Procedia CIRP, pp. 406 - 411, http://dx.doi.org/10.1016/j.procir.2021.01.125
, 2021, 'Eco-efficiency limits of product technologies towards achieving science-based targets', in Procedia CIRP, pp. 488 - 493, http://dx.doi.org/10.1016/j.procir.2021.01.139
, 2021, 'Investigation of the potential for an automated disassembly process of BEV batteries', in Procedia CIRP, pp. 559 - 564, http://dx.doi.org/10.1016/j.procir.2021.01.151
, 2021, 'Screw detection for disassembly of electronic waste using reasoning and re-training of a deep learning model', in Procedia CIRP, pp. 666 - 671, http://dx.doi.org/10.1016/j.procir.2021.01.172
, 2020, 'Monitoring and control of unstructured manufacturing big data', in IEEE International Conference on Industrial Engineering and Engineering Management, pp. 928 - 932, http://dx.doi.org/10.1109/IEEM45057.2020.9309975
, 2020, 'An investigation into the role of PV industry in meeting the growing energy demand towards absolute sustainability', in Procedia CIRP, pp. 383 - 387, http://dx.doi.org/10.1016/j.procir.2020.02.128
, 2020, 'Green paradox and the role of life cycle engineering', in Procedia CIRP, pp. 159 - 164, http://dx.doi.org/10.1016/j.procir.2020.02.057
, 2020, 'Product portfolio analysis towards operationalising science-based targets', in Procedia CIRP, pp. 377 - 382, http://dx.doi.org/10.1016/j.procir.2020.02.127
, 2019, 'Large scale MTConnect data collection', in Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019, pp. 77 - 82, http://dx.doi.org/10.1109/CIS-RAM47153.2019.9095828
, 2019, 'Life cycle assessment for the comparison of urban and non-urban produced products', in Procedia CIRP, West Lafayette, IN, USA, pp. 405 - 410, presented at
, 2018, 'Life Cycle Oriented Industrial Value Creation in Cities', in Procedia CIRP, pp. 94 - 99, http://dx.doi.org/10.1016/j.procir.2017.11.069
, 2017, 'A Review of Modelling Approaches for Conceptual Design of Complex
Engineering Systems (CESs)', in A Review of Modelling Approaches for Conceptual Design of Complex Engineering Systems (CESs), Institute of Electrical and Electronics Engineers (IEEE), Singapore, pp. 1266 - 1270, presented at
, 2017, 'Concurrent scheduling of a job shop and microgrid to minimize energy costs under due date constraints', in 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), IEEE, Singapore, pp. 1326 - 1330, presented at
, 2017, 'The Role of Circular Economy, Consumption Reduction, and Material Efficiency in Peak Waste', in Sixteenth International Waste Management and Landfill Symposium, Sardinia, Italy, presented at
, 2017, 'Delivery Lot Splitting as an Enabler for Cross-docking and Fast Delivery', in Procedia CIRP, pp. 639 - 644, http://dx.doi.org/10.1016/j.procir.2017.03.151
, 2017, 'Reducing of blast induced vibration problem at Gaziantep CYS quarry by using electronic initiation systems', in IMCET 2017: New Trends in Mining - Proceedings of 25th International Mining Congress of Turkey, pp. 507 - 515
, 2016, 'Designing warehouse logical architecture by applying object oriented model based system engineering', in Wang L; Kjellberg T (ed.), Procedia CIRP, Elsevier: Creative Commons Attribution Non-Commercial No-Derivatives License, Stockholm,Sweden, pp. 713 - 718, presented at
, 2016, 'Development of Software Tool for Cellular Structure Integration for Additive Manufacturing', in Procedia CIRP, pp. 489 - 494, http://dx.doi.org/10.1016/j.procir.2016.03.148
, 2016, 'Finite Element Analysis and Validation of Cellular Structures', in Procedia CIRP, pp. 94 - 99, http://dx.doi.org/10.1016/j.procir.2016.05.018
, 2015, 'General plans for removing main components in cognitive robotic disassembly automation', in ICARA 2015 - Proceedings of the 2015 6th International Conference on Automation, Robotics and Applications, pp. 501 - 506, http://dx.doi.org/10.1109/ICARA.2015.7081199
, 2015, 'Editorial', in Procedia CIRP, pp. viii - ix, http://dx.doi.org/10.1016/S2212-8271(15)00584-3
, 2015, 'Assessing the Impact of Embodied Water in Manufacturing Systems', in Procedia CIRP, pp. 80 - 85, presented at
, 2015, 'Characterising Energy Efficiency of Electrical Discharge Machining (EDM) Processes', in Procedia CIRP, pp. 263 - 268, presented at
, 2015, 'Defining Circulation Factories – A Pathway towards Factories of the Future', in Procedia CIRP, pp. 627 - 632, presented at
, 2015, 'Hierarchical Modelling of Complex Material and Energy Flow in Manufacturing Systems', in Procedia CIRP, pp. 92 - 97, presented at
, 2015, 'Industry-university Collaboration in Sustainable Manufacturing', in Procedia CIRP, pp. 8 - 12, presented at
, 2015, 'Life Cycle Assessment of Electric Vehicles – A Framework to Consider Influencing Factors', in Procedia CIRP, pp. 233 - 238, presented at
, 2015, 'Robot Assisted Disassembly for the Recycling of Electric Vehicle Batteries', in Procedia CIRP, pp. 716 - 721, presented at
, 2014, 'HEAT AND MASS TRANSFER MODELLING OF AN INDUSTRIAL AUTOCLAVE TO MINIMISE STEAM CONSUMPTION', in Proceedings of the 15th International Heat Transfer Conference, IHTC-15, Kyoto, Japan, presented at
, 2014, 'The latest generation of the electronic system enhanced safety and productivity', in Procedia Engineering, pp. 432 - 440, http://dx.doi.org/10.1016/j.proeng.2014.09.052
, 2014, 'Reactive modelling of on-site energy system components for real-time application', in Intelligent Energy and Power Systems (IEPS), 2014 IEEE International Conference on, pp. 219 - 224, presented at
, 2013, 'Outsourcing Outcomes and CO2 Emissions in Australian Manufacturing Industry', in Laptaned U; Benabdelhafid A (ed.), Rome, Italy, presented at
, 2012, 'A Forecasting Model for the Evaluation of Future Resource Availability', in Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Springer, Germany, pp. 449 - 454, presented at
, 2012, 'A Framework for Using Cognitive Robotics in Disassembly Automation', in Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Springer, Germany, pp. 173 - 178, presented at
, 2012, 'A Generic Simulation Model for Green Supplier Selection', in Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Springer, Germany, pp. 587 - 592, presented at
, 2012, 'A Hierarchical Evaluation Scheme for Industrial Process Chains: Aluminum Die Casting', in Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Springer, Germany, pp. 503 - 508, presented at
, 2012, 'Dynamic Total Cost of Ownership (TCO) Calculation of Injection Moulding Machines', in Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Springer, Germany, pp. 275 - 280, presented at
, 2012, 'Environmental Footprint of Magnetite Nanoparticle Application: Iron Oxide Case', in Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Springer, Germany, pp. 113 - 118, presented at
, 2012, 'Impact of Technology on Product Life Cycle Design: Functional and Environmental Perspective', in Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Springer, Germany, pp. 191 - 196, presented at
, 2012, 'Unit Process Energy Consumption Models for Material Addition Processes: A Case of the Injection Molding Process', in Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Springer, Germany, pp. 269 - 274, presented at
, 2012, 'Using Jatropha Oil Based Metalworking Fluids in Machining Processes: A Functional and Ecological Life Cycle Evaluation', in Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Springer, Germany, pp. 311 - 316, presented at
, 2011, 'An Investigation into Fixed Energy Consumption of Machine Tools', in Proceedings of the 18th CIRP International conference on Life Cycle Engineering, Springer, Berlin, pp. 268 - 273, presented at
, 2011, 'Electricity Metering and Monitoring in Manufacturing Systems', in Proceedings of the 18th CIRP International conference on Life Cycle Engineering, Springer, Berlin, pp. 1 - 10, presented at
, 2011, 'Energy Efficiency Measures for the Design and Operation of Machine Tools: An Axiomatic Approach', in Proceedings of the 18th CIRP International conference on Life Cycle Engineering, Springer, Berlin, pp. 274 - 279, presented at
, 2011, 'State of Research and an innovative Approach for simulating Energy Flows of Manufacturing Systems', in Proceedings of the 18th CIRP International conference on Life Cycle Engineering, Springer, Berlin, pp. 335 - 340, presented at
, 2011, 'Carbon Footprint Analysis of Products Cradle-To-Gate and Manufacturing Supply Chains', in 7th Australian Life Cycle Assessment Conference, Australian Life Cycle Assessment Society, Victoria, Australia, pp. 1 - 10, presented at
, 2011, 'Environmental footprint of single-use surgical instruments in comparison with multi-use surgical instruments', in Glocalized Solutions for Sustainability in Manufacturing - Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, pp. 623 - 628, http://dx.doi.org/10.1007/978-3-642-19692-8_108
, 2010, 'Impact of Manufacturing Supply Chains on the Embodied Energy of Products', in Proceedings International Conference on Manufacturing Systems, NWV Neuer Wissenschaftlincher Verlag, Vienna, pp. 187 - 194, presented at