Select Publications

Journal articles

Wang S; Shen Y, 2022, 'Particle-scale modelling of the pyrolysis of end-of-life solar panel particles in fluidized bed reactors', Resources, Conservation and Recycling, vol. 183, pp. 106378 - 106378, http://dx.doi.org/10.1016/j.resconrec.2022.106378

Kang B; Shen Y; Zhu D; Ziveyi J, 2022, 'Valuation of guaranteed minimum maturity benefits under generalised regime-switching models using the Fourier Cosine method', Insurance: Mathematics and Economics, vol. 105, pp. 96 - 127, http://dx.doi.org/10.1016/j.insmatheco.2022.03.012

Wu C; Zhuo Y; Xu X; Farajzadeh E; Dou J; Yu J; Shen Y; Zhang Z, 2022, 'A combined experimental and numerical study of coal briquettes pyrolysis using recycled gas in an industrial scale pyrolyser', Powder Technology, vol. 404, pp. 117477 - 117477, http://dx.doi.org/10.1016/j.powtec.2022.117477

Wang S; Shen Y, 2022, 'Super-quadric CFD-DEM simulation of chip-like particles flow in a fluidized bed', Chemical Engineering Science, vol. 251, http://dx.doi.org/10.1016/j.ces.2022.117431

Wang S; Shen Y, 2022, 'Coarse-grained CFD-DEM modelling of dense gas-solid reacting flow', International Journal of Heat and Mass Transfer, vol. 184, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2021.122302

Song S; Rong L; Dong K; Liu X; Le-Clech P; Shen Y, 2022, 'Pore-scale numerical study of intrinsic permeability for fluid flow through asymmetric ceramic microfiltration membranes', Journal of Membrane Science, vol. 642, pp. 119920 - 119920, http://dx.doi.org/10.1016/j.memsci.2021.119920

Li S; Shen Y, 2022, 'Numerical simulation of multiphase flow in a full coal-direct chemical looping combustion process', Chemical Engineering Science, vol. 248, http://dx.doi.org/10.1016/j.ces.2021.117233

Yu X; Shen Y, 2022, 'Transient State modeling of Industry-scale ironmaking blast furnaces', Chemical Engineering Science, vol. 248, http://dx.doi.org/10.1016/j.ces.2021.117185

Li S; Shen Y, 2022, 'An approach to simulate gas-solid flow systems with process controllers', Chemical Engineering Journal, vol. 429, http://dx.doi.org/10.1016/j.cej.2021.132443

Jin X; Wang S; Shen Y, 2022, 'DEM study of mixing behaviours of cohesive particles in a U-shaped ribbon mixer', Powder Technology, vol. 399, http://dx.doi.org/10.1016/j.powtec.2021.117097

Zhou H; Tian X; Guo X; Kou M; Wu S; Shen Y; You Y, 2022, 'DEM study of the angle of repose and porosity distribution of cylindrical particles with different lengths', International Journal of Chemical Reactor Engineering, vol. 20, pp. 197 - 207, http://dx.doi.org/10.1515/ijcre-2021-0174

Hu Y; Zhou H; She X; Kou M; Wu S; Zhang Z; Shen Y, 2022, 'Numerical Simulation of Combustion Characteristics in the Dome Zone of the COREX Melter-Gasifier: The Effect of Rising Gas', Industrial and Engineering Chemistry Research, vol. 61, pp. 931 - 941, http://dx.doi.org/10.1021/acs.iecr.1c03774

Xie Z; Gu X; Shen Y, 2022, 'A Machine Learning Study of Predicting Mixing and Segregation Behaviors in a Bidisperse Solid-Liquid Fluidized Bed', Industrial and Engineering Chemistry Research, http://dx.doi.org/10.1021/acs.iecr.2c00071

Jin X; Chandratilleke GR; Wang S; Shen Y, 2022, 'DEM investigation of mixing indices in a ribbon mixer', Particuology, vol. 60, pp. 37 - 47, http://dx.doi.org/10.1016/j.partic.2021.03.005

Jin X; Wang S; Shen Y, 2022, 'DEM study of the effect of impeller design on mixing performance in a U-shape ribbon mixer', Advanced Powder Technology, vol. 33, http://dx.doi.org/10.1016/j.apt.2021.10.026

Song S; Rong L; Dong K; Shen Y, 2022, 'Numerical study of the hydraulic tortuosity for fluid flow through elliptical particle packings', Powder Technology, vol. 398, pp. 117047 - 117047, http://dx.doi.org/10.1016/j.powtec.2021.117047

Yue Y; Wang S; Shen Y, 2021, 'Exploring mechanism of spout deflection in a spout fluidized bed', Chemical Engineering Science, vol. 245, pp. 116942 - 116942, http://dx.doi.org/10.1016/j.ces.2021.116942

Yue Y; Wang S; Shen Y, 2021, 'CFD-DEM study of mitigation of alternating spout deflection in a spout fluidized bed: A geometry perspective', Powder Technology, vol. 394, pp. 278 - 289, http://dx.doi.org/10.1016/j.powtec.2021.08.041

Cui J; Zhang Y; Hao X; Liu X; Shen Y, 2021, 'Thermodynamic calculation of S−Sb system and Cu−S−Sb system', Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, vol. 75, http://dx.doi.org/10.1016/j.calphad.2021.102362

Xie Z; Wang S; Shen Y, 2021, 'CFD-DEM study of segregation and mixing characteristics under a bi-disperse solid-liquid fluidised bed', Advanced Powder Technology, vol. 32, pp. 4078 - 4095, http://dx.doi.org/10.1016/j.apt.2021.09.012

Chandratilleke GR; Jin X; Shen YS, 2021, 'DEM study of effects of particle size and density on mixing behaviour in a ribbon mixer', Powder Technology, vol. 392, pp. 93 - 107, http://dx.doi.org/10.1016/j.powtec.2021.06.058

Zhou H; Xu K; Tian X; Kou M; Wu S; Shen Y, 2021, 'Influence of burden profile on gas-solid distribution in COREX shaft furnace with center gas supply by CFD-DEM model', Powder Technology, vol. 392, pp. 672 - 679, http://dx.doi.org/10.1016/j.powtec.2021.07.039

Liu Y; Shen Y, 2021, 'Modelling and optimisation of biomass injection in ironmaking blast furnaces', Progress in Energy and Combustion Science, vol. 87, pp. 100952 - 100952, http://dx.doi.org/10.1016/j.pecs.2021.100952

Zhou H; Tian X; Kou M; Wu S; Shen Y, 2021, 'Numerical study of fine particles behaviors in a packed bed with lateral injection using CFD-DEM', Powder Technology, vol. 392, pp. 317 - 324, http://dx.doi.org/10.1016/j.powtec.2021.07.019

Zhuo Y; Hu Z; Shen Y, 2021, 'CFD study of hydrogen injection through tuyeres into ironmaking blast furnaces', Fuel, vol. 302, http://dx.doi.org/10.1016/j.fuel.2021.120804

Wang S; Shen Y, 2021, 'CFD-DEM modelling of raceway dynamics and coke combustion in an ironmaking blast furnace', Fuel, vol. 302, pp. 121167 - 121167, http://dx.doi.org/10.1016/j.fuel.2021.121167

Yu X; Hu Z; Shen Y, 2021, 'Modeling of hydrogen shaft injection in ironmaking blast furnaces', Fuel, vol. 302, http://dx.doi.org/10.1016/j.fuel.2021.121092

Liu Y; Hu Z; Shen Y, 2021, 'CFD Study of Hydrogen Injection in Blast Furnaces: Tuyere Co-injection of Hydrogen and Coal', Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 52, pp. 2971 - 2991, http://dx.doi.org/10.1007/s11663-021-02156-z

Xiong Q; Wang J; Shen Y, 2021, 'Editorial-special issue of “advances in process intensification of fluidization”', Chemical Engineering and Processing - Process Intensification, vol. 167, http://dx.doi.org/10.1016/j.cep.2021.108557

Li W; Zhuo Y; Bao J; Shen Y, 2021, 'A data-based soft-sensor approach to estimating raceway depth in ironmaking blast furnaces', Powder Technology, vol. 390, pp. 529 - 538, http://dx.doi.org/10.1016/j.powtec.2021.05.072

Wang S; Shen Y, 2021, 'Particle-scale modelling of raceway dynamics in a blast furnace using a smoothing method', Powder Technology, vol. 389, pp. 189 - 203, http://dx.doi.org/10.1016/j.powtec.2021.05.020

Yue Y; Wang S; Shen Y, 2021, 'Spout deflection in spouted beds and countermeasures: A review', Powder Technology, vol. 389, pp. 309 - 327, http://dx.doi.org/10.1016/j.powtec.2021.05.022

Wang S; Shen Y, 2021, 'Particle-scale study of heat and mass transfer in a bubbling fluidised bed', Chemical Engineering Science, vol. 240, pp. 116655 - 116655, http://dx.doi.org/10.1016/j.ces.2021.116655

Wong XY; Zhuo Y; Shen Y, 2021, 'Numerical Analysis of Hydrogen Bubble Behavior in a Zero-Gap Alkaline Water Electrolyzer Flow Channel', Industrial and Engineering Chemistry Research, vol. 60, pp. 12429 - 12446, http://dx.doi.org/10.1021/acs.iecr.1c02554

Yue Y; Wang S; Bahl P; de Silva C; Shen Y, 2021, 'Experimental investigation of spout incoherence in a spouted bed', Chemical Engineering Journal, vol. 418, pp. 129320 - 129320, http://dx.doi.org/10.1016/j.cej.2021.129320

Li S; Shen Y, 2021, 'CFD study of nonuniformity of gas-solid flow through a chemical looping combustion system with symmetrical series loops', Powder Technology, vol. 387, pp. 108 - 124, http://dx.doi.org/10.1016/j.powtec.2021.04.008

Zhuo Y; Jung S; Shen Y, 2021, 'Numerical Study of Hydrogen Desorption in an Innovative Metal Hydride Hydrogen Storage Tank', Energy and Fuels, vol. 35, pp. 10908 - 10917, http://dx.doi.org/10.1021/acs.energyfuels.1c00666

Zhuo Y; Xie Z; Shen Y, 2021, 'Model study of carbonisation of low rank coal briquettes: Effect of briquettes shape', Powder Technology, vol. 385, pp. 120 - 130, http://dx.doi.org/10.1016/j.powtec.2021.02.071

Wang T; Wang S; Shen Y, 2021, 'Particle-scale study of gas-solid flows in a bubbling fluidised bed: Effect of drag force and collision models', Powder Technology, vol. 384, pp. 353 - 367, http://dx.doi.org/10.1016/j.powtec.2021.02.034

Yue Y; Wang S; Shen Y, 2021, 'Gas-solid mixing and heat transfer performance in alternating spout deflection', Chemical Engineering Science, vol. 234, http://dx.doi.org/10.1016/j.ces.2021.116446

Li Q; Zhuo Y; Shanks K; Taylor RA; Conneely B; Tan A; Shen Y; Scott J, 2021, 'A winged solar biomass reactor for producing 5-hydroxymethylfurfural (5-HMF)', Solar Energy, vol. 218, pp. 455 - 468, http://dx.doi.org/10.1016/j.solener.2021.03.001

Li S; Shen Y, 2021, 'CFD investigation of maldistribution in a full-loop circulating fluidized bed with double parallel cyclones', Powder Technology, vol. 381, pp. 665 - 684, http://dx.doi.org/10.1016/j.powtec.2020.12.020

Song S; Rong L; Dong K; Shen Y, 2021, 'Numerical investigation of drag property for fluid flow through random arrays of elliptical cylinders', Powder Technology, vol. 380, pp. 539 - 552, http://dx.doi.org/10.1016/j.powtec.2020.11.003

Chen X; Wang C; Liu Y; Shen Y; Zheng Q; Yang S; Lu H; Zou H; Lin K; Liu H; Qiu H; Wu J; Zhang Q; Liu X, 2021, 'Popcorn-like aluminum-based powders for instant low-temperature water vapor hydrogen generation', Materials Today Energy, vol. 19, http://dx.doi.org/10.1016/j.mtener.2020.100602

Zhou P; Shen Y; Zhao S; Li G; Cui B; Wei D; Shen Y, 2021, 'Synthesis of clinoptilolite-supported BiOCl/TiO2 heterojunction nanocomposites with highly-enhanced photocatalytic activity for the complete degradation of xanthates under visible light', Chemical Engineering Journal, vol. 407, http://dx.doi.org/10.1016/j.cej.2020.126697

Xie Z; Wang S; Shen Y, 2021, 'CFD-DEM modelling of the migration of fines in suspension flow through a solid packed bed', Chemical Engineering Science, vol. 231, pp. 116261 - 116261, http://dx.doi.org/10.1016/j.ces.2020.116261

Yue Y; Zhang C; Shen Y, 2021, 'CFD-DEM model study of gas–solid flow in a spout fluidized bed with an umbrella-like baffle', Chemical Engineering Science, vol. 230, pp. 116234 - 116234, http://dx.doi.org/10.1016/j.ces.2020.116234

Zhou H; Tian X; Yao S; Kou M; Wu S; Shen Y, 2021, 'Numerical analysis of blast furnace with injection of COREX export gas after removal of CO2', ISIJ International, vol. 61, pp. 174 - 181, http://dx.doi.org/10.2355/isijinternational.ISIJINT-2020-384

Chen J; Wu D; Hu Y; Shen Y; Wang G, 2021, 'Numerical Modeling of the Tuyere Surface Abrasion under Different Operating Conditions of Blast Furnace', Steel Research International, vol. 93, http://dx.doi.org/10.1002/srin.202100591

Lin CH; Lyu Z; Zhuo Y; Zhao C; Yang J; Liu C; Kim J; He T; Hu L; Li F; Shen Y; Liu K; Yu W; Wu T, 2020, 'Microwave Synthesis and High-Mobility Charge Transport of Carbon-Nanotube-in-Perovskite Single Crystals', Advanced Optical Materials, vol. 8, http://dx.doi.org/10.1002/adom.202001740


Back to profile page