By Professor Zhongxiao Peng

Journal articles

Peng Z; Baena JC; Wang M, 2015, 'Investigations of micron and submicron wear features of diseased human cartilage surfaces', Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 229, pp. 164 - 174, http://dx.doi.org/10.1177/0954411915572496

Wang M; Peng Z, 2015, 'Investigation of the nano-mechanical properties and surface topographies of wear particles and human knee cartilages', Wear, 324-325, pp. 74 - 79, http://dx.doi.org/10.1016/j.wear.2014.11.033

Dong CL; Yuan CQ; Bai XQ; Yan XP; Peng Z, 2015, 'Tribological properties of aged nitrile butadiene rubber under dry sliding conditions', Wear, 322-323, pp. 226 - 237, http://dx.doi.org/10.1016/j.wear.2014.11.010

Peng Z; Izzat Abdul Rahman M; Zhang Y; Yin L, 2015, 'Wear behavior of pressable lithium disilicate glass ceramic', Journal of Biomedical Materials Research - Part B Applied Biomaterials, http://dx.doi.org/10.1002/jbm.b.33447

Hu C; Peng Z, 2015, 'Frequency band selection based on the kurtosis of the squared envelope spectrum and its application in bearing fault diagnosis', Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 229, pp. 0954406215595655 - 0954406215595655, http://dx.doi.org/10.1177/0954406215595655

Wang ML; Peng ZX, 2015, 'Wear in human knees', Biosurface and Biotribology, 1, pp. 98 - 112, http://dx.doi.org/10.1016/j.bsbt.2015.06.003

Baena JC; Peng Z, 2014, '3D quantitative characterization of degraded surfaces of human knee cartilages affected by osteoarthritis', Wear, 319, pp. 1 - 11, http://dx.doi.org/10.1016/j.wear.2014.07.004

Wang M; Ketheesan N; Peng Z, 2014, 'Investigations of wear particles and selected cytokines in human osteoarthritic knee joints', Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228, pp. 1176 - 1182, http://dx.doi.org/10.1177/0954411914559570

Peng Y; Wu T; Wang S; Peng Z, 2014, 'Oxidation wear monitoring based on the color extraction of on-line wear debris', Wear, http://dx.doi.org/10.1016/j.wear.2014.12.047

Wu T; Wu H; Du Y; Kwok N; Peng Z, 2014, 'Imaged wear debris separation for on-line monitoring using gray level and integrated morphological features', Wear, 316, pp. 19 - 29, http://dx.doi.org/10.1016/j.wear.2014.04.014

Li Z; Zhang Y; Yan X; Peng Z, 2014, 'A novel prediction model for aircraft spare part intermittent demand in aviation transportation logistics using multi-components accumulation and high resolution analysis', Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, http://dx.doi.org/10.1177/0954410014531742

Guo Z; Yuan C; Yan X; Peng Z, 2014, '3D surface characterizations of wear particles generated from lubricated regular concave cylinder liners', Tribology Letters, 55, pp. 131 - 142, http://dx.doi.org/10.1007/s11249-014-0340-1

Dong C; Yuan C; Bai X; Yan X; Peng Z, 2014, 'Study on wear behaviour and wear model of nitrile butadiene rubber under water lubricated conditions', RSC Advances, 4, pp. 19034 - 19042, http://dx.doi.org/10.1039/c4ra01703j

Wu H; Wu T; Peng Y; Peng Z, 2014, 'Watershed-based morphological separation of wear debris chains for on-line ferrograph analysis', Tribology Letters, 53, pp. 411 - 420, http://dx.doi.org/10.1007/s11249-013-0280-1

Guo Z; Yuan C; Li Z; Peng Z; Yan X, 2013, 'Condition identification of the cylinder liner-piston ring in a marine diesel engine using bispectrum analysis and artificial neural networks', Insight: Non-Destructive Testing and Condition Monitoring, 55, pp. 621 - 626, http://dx.doi.org/10.1784/insi.2012.55.11.621

Yin L; Lymer R; Billiau N; Peng Z; Stoll R, 2013, 'Damage morphology produced in low-cycle high-load indentations of feldspar porcelain and leucite glass ceramic', Journal of Materials Science, 48, pp. 7902 - 7912, http://dx.doi.org/10.1007/s10853-013-7599-8

Li Z; Yan X; Qin L; Yuan C; Peng Z, 2013, 'Model reference robust control for marine propulsion systems with model uncertainty caused by hull deformation', Journal of Marine Science and Technology (Taiwan), 21, pp. 400 - 409, http://dx.doi.org/10.6119/JMST-012-0518-5

Wang M; Peng Z; Vasilev K; Ketheesan N, 2013, 'Investigation of wear particles generated in human knee joints using atomic force microscopy', Tribology Letters, 51, pp. 161 - 170, http://dx.doi.org/10.1007/s11249-013-0160-8

Yan X; Li Z; Zhang Y; Yuan C; Peng Z, 2013, 'Study on key techniques of wear monitoring and fault diagnosis for marine diesel engines: a review', Zhongguo Jixie Gongcheng/China Mechanical Engineering, 24, pp. 1413 - 1419, http://dx.doi.org/10.3969/j.issn.1004-132X.2013.10.027

Wang M; Peng Z; Price J; Ketheesan N, 2013, 'Study of the nano-mechanical properties of human knee cartilage in different wear conditions', Wear, 301, pp. 188 - 191, http://dx.doi.org/10.1016/j.wear.2012.12.015

Peng Z; Wang M, 2013, 'Three dimensional surface characterization of human cartilages at a micron and nanometre scale', Wear, 301, pp. 210 - 217, http://dx.doi.org/10.1016/j.wear.2012.11.056

Guo Z; Yuan C; Li Z; Yan X; Peng Z, 2013, 'Condition identification of cylinder liner-piston ring in marine diesel engine using bispectrum analysis and artificial neural networks', 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2013, CM 2013 and MFPT 2013, 2, pp. 1145 - 1156

Wu T; Wu H; Du Y; Peng Z, 2013, 'Progress and trend of sensor technology for on-line oil monitoring', Science China Technological Sciences, 56, pp. 2914 - 2926, http://dx.doi.org/10.1007/s11431-013-5400-5

Li Z; Yan XP; Tian Z; Yuan CQ; Peng Z; Tian Z, 2013, 'Blind vibration component separation and nonlinear feature extraction applied to the nonstationary vibration signals for the gearbox multi-fault diagnosis', Measurement, 46, pp. 259 - 271, http://dx.doi.org/10.1016/j.measurement.2012.06.013

Wu J; Peng Z; Tipper J, 2013, 'Mechanical properties and three-dimensional topological characterisation of micron, submicron and nanoparticles from artificial joints', Tribology Letters, 52, pp. 449 - 460, http://dx.doi.org/10.1007/s11249-013-0228-5

Wang M; Peng Z; Wang J; Jiang X, 2013, 'Wear characterisation of articular cartilage surfaces at a nano-scale using atomic force microscopy', Tribology International, 63, pp. 235 - 242, http://dx.doi.org/10.1016/j.triboint.2012.11.001

Bai XQ; Xie GT; Fan H; Peng ZX; Yuan CQ; Yan XP, 2012, 'Study on biomimetic preparation of shell surface microstructure for ship antifouling', Wear, 306, pp. 285 - 295, http://dx.doi.org/10.1016/j.wear.2012.11.020

Li L; Yu X; Zhang Q; Peng Z, 2012, 'Detrended fluctuation analysis in machine condition diagnosis', Advanced Science Letters, 6, pp. 377 - 380, http://dx.doi.org/10.1166/asl.2012.2201

Tian Y; Wang J; Peng Z; Jiang X, 2012, 'A new approach to numerical characterisation of wear particle surfaces in three-dimensions for wear study', Wear, 282-283, pp. 59 - 68, http://dx.doi.org/10.1016/j.wear.2012.02.002

Li Z; Yan XP; Guo ZW; Liu P; Yuan CQ; Peng Z, 2012, 'A New Intelligent Fusion Method of Multi-Dimensional Sensors and its Application to Tribo-System Fault Diagnosis of Marine Diesel Engines', Tribology Letters, 47, pp. 1 - 15, http://dx.doi.org/10.1007/s11249-012-9948-1

Kushan M; Peng Z; Peng S, 2012, 'A New System of Failure Warning and Monitoring Control System for Gas Turbine Compressor (GTC)/ Auxiliary Power Unit (APU) of Aircrafts and a Sample Study', Advanced Materials Research, 503-504, pp. 1633 - 1638, http://dx.doi.org/10.4028/www.scientific.net/AMR.503-504.1633

Li Z; Yan X; Guo ZW; Zhang Y; Yuan CQ; Peng Z, 2012, 'Condition monitoring and fault diagnosis for marine diesel engines using information fusion techniques', Elektronika ir Elektrotechnika, 123, pp. 109 - 112, http://dx.doi.org/10.5755/j01.eee.123.7.2387

Li Z; Yan X; Yuan CQ; Peng Z, 2012, 'Intelligent fault diagnosis method for marine diesel engines using instantaneous angular speed', Journal of Mechanical Science and Technology, 26, pp. 2413 - 2423, http://dx.doi.org/10.1007/s12206-012-0621-2

Wang M; Peng Z; Watson J; Watson G; Yin L, 2012, 'Nanoscale study of cartilage surfaces using atomic force microscopy', Proceedings of the Institution of Mechanical Engineers Part H - Journal of Engineering in Medicine, 226, pp. 899 - 910, http://dx.doi.org/10.1177/0954411912460482

Li Z; Yan X; Peng Z, 2012, 'Ship electric propulsion with the sensorless permanent magnet sysnchronous motor: A simulation study', Proceedings of the Institution of Mechanical Engineers. Proceedings Part M, Journal of Engineering for the Maritime Environment, 226, pp. 378 - 386, http://dx.doi.org/10.1177/1475090212443189

Li Z; Yan X; Yuan C; Peng Z; Li L, 2011, 'Virtual prototype and experimental research on gear multi-fault diagnosis using wavelet-autoregressive model and principal component analysis method', Mechanical Systems and Signal Processing, 25, pp. 2589 - 2607, http://dx.doi.org/10.1016/j.ymssp.2011.02.017

Tian Y; Wang J; Peng Z; Jiang X, 2011, 'Numerical analysis of cartilage surfaces for osteoarthritis diagnosis using field and feature parameters', Wear, 271, pp. 2370 - 2378, http://dx.doi.org/10.1016/j.wear.2011.01.081

Tian Y; Peng Z; Gorton D; Xiao Y; Ketheesan N, 2011, 'Immunohistochemical analysis of structural changes in collagen for the assessment of osteoarthritis', Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 225, pp. 680 - 687, http://dx.doi.org/10.1177/0954411911402135

Li Z; Yan X; Yuan C; Zhao J; Peng Z, 2011, 'Fault detection and diagnosis of a gearbox in marine propulsion systems using bispectrum analysis and artificial neural networks', Journal of Marine Science and Application, 10, pp. 17 - 24, http://dx.doi.org/10.1007/s11804-011-1036-7

Lei C; Peng Z; Day T; Yan X; Bai X; Yuan C, 2011, 'Experimental observation of surface morphology effect on crystallization fouling in plate heat exchangers', International Communications in Heat and Mass Transfer, 38, pp. 25 - 30, http://dx.doi.org/10.1016/j.icheatmasstransfer.2010.10.006

Li Z; Yan X; Yuan C; Zhao J; Peng Z, 2010, 'A new method of nonlinear feature extraction for multi-fault diagnosis of rotor systems', Noise and Vibration Worldwide, 41, pp. 29 - 37, http://dx.doi.org/10.1260/0957-4565.41.10.29

Li Z; Yan X; Yuan C; Zhao J; Peng Z, 2010, 'The fault diagnosis approach for gears using multidimensional features and intelligent classifier', Noise and Vibration Worldwide, 41, pp. 76 - 86, http://dx.doi.org/10.1260/0957-4565.41.10.76

Li Z; Yan X; Yuan C; Peng Z, 2010, 'Gear faults diagnosis based on wavelet-AR model and PCA', Proceedings of SPIE - The International Society for Optical Engineering, 7820, http://dx.doi.org/10.1117/12.866387

Mulligan R; Yin L; Lamont A; Peng Z; Forwood MR; Teoh SH, 2010, 'Effect of penetration rate on insertion force in trabecular bone biopsy', Materials Science Forum, 654-656, pp. 2225 - 2228, http://dx.doi.org/10.4028/www.scientific.net/MSF.654-656.2225

Allen C; Peng Z; Yin L; Carmichael E, 2010, 'Nano-hardness testing of wear particles in sheep knee joints', Materials Science Forum, 654-656, pp. 2253 - 2256, http://dx.doi.org/10.4028/www.scientific.net/MSF.654-656.2253

Lymer R; Yin L; Peng Z; Jones RHB; Sandham A, 2010, 'Surface roughness and stress responses of a feldspar porcelain to fatigue impact', Key Engineering Materials, 443, pp. 557 - 561, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.557

Li L; Peng Z; Peng S, 2009, 'Detrended fluctuation analysis for gear fault diagnosis', Zhongguo Jixie Gongcheng/China Mechanical Engineering, 20, pp. 2311 - 2314

Peng Z; Fasiolo M; Hart K, 2009, 'Investigation into changes in collagen structure of articular cartilage and wear particles of knee joints for osteoarthritic wear assessment', Journal of Musculoskeletal Research, 12, pp. 143 - 152, http://dx.doi.org/10.1142/S0218957709002316

Kushan MC; Peng Z; Peng S, 2009, 'A new approach of failure warning and monitoring control system of auxiliary power unit', SAE Technical Papers, http://dx.doi.org/10.4271/2009-01-3227

Scardino AJ; Hudleston D; Peng Z; Paul NA; De Nys R, 2009, 'Biomimetic characterisation of key surface parameters for the development of fouling resistant materials', Biofouling, 25, pp. 83 - 93, http://dx.doi.org/10.1080/08927010802538480

Back to profile page