ORCID as entered in ROS
https://orcid.org/0000-0002-3059-5813
Select Publications
Conference Papers
, 2024, 'Detection of Multiple Cracks in Gears using Transmission Error', in 11th Australasian Congress on Applied Mechanics, ACAM 2024, pp. 173 - 182
, 2024, 'Evaluation of transmission error for gear diagnostics', in 11th Australasian Congress on Applied Mechanics, ACAM 2024, pp. 235 - 243
, 2024, 'Explainable AI for condition monitoring applications: Potential and challenges', in 11th Australasian Congress on Applied Mechanics, ACAM 2024, pp. 201 - 214
, 2022, 'A new look at bearing signal models', in Proceedings of ISMA 2022 - International Conference on Noise and Vibration Engineering and USD 2022 - International Conference on Uncertainty in Structural Dynamics, pp. 592 - 602
, 2018, 'Multi-dimensional variational mode decomposition applied to intrinsic vibration mode extraction for bearing crack detection in wind turbines with large speed variation', in 35th Wind Energy Symposium, 2017, Grapevine, Texas, presented at
, 2017, 'Multifunctional rubber based composites for marine applications: A review', UNDW， Sydney, presented at
, 2017, 'Three dimensional shape measurement of wear particle by iterative volume intersection', in Yu H; Dong Y (ed.), Proceedings of SPIE - The International Society for Optical Engineering, SPIE, the international society for optics and photonics, PEOPLES R CHINA, Ocean Univ China, Acad Exchange Ctr, Qingdao, pp. 106153q, presented at
, 2017, 'Effects of surface roughness on sliding friction behaviour', Beijing, China, presented at
, 2017, 'Condition monitoring of rotating machinery with acoustic emission: a British-Australian collaboration', in ational Conference on Vibration Engineering and Technology of Machinery, Springer Nature, Brisbane, Australia, pp. 119 - 128, presented at
, 2017, 'Use of cyclostationarity to detect changes in gear surface roughness using vibration measurements', in Proceedings of the 12th World Congress on Engineering Asset Management & the 13th International Conference on Vibration Engineering and Technology of Machinery, Springer Nature, Brisbane, pp. 763 - 771, presented at
, 2017, 'Development of an indicator to locate faults on planet gears', Portugal, presented at
, 2017, 'Cepstral removal of resonance effects to improve the use of traditional gear diagnostic indicators at different speeds', London, UK, presented at
, 2017, 'Integrated Approach for Health Assessment of IC Engine Bearings through Numerical Simulation', Melbourne, Australia, presented at
, 2017, 'Use of Cyclostationary Properties to Diagnose Planet Bearing Faults in Variable Speed Conditions', Melbourne, Australia, presented at
, 2017, 'Multi-dimensional variational mode decomposition applied to intrinsic vibration mode extraction for bearing crack detection in wind turbines with large speed variation', in 35th Wind Energy Symposium, 2017, http://dx.doi.org/10.2514/6.2017-1169
, 2016, 'Development of Mixing Methods of UHMWPE/Carbon Nanotubes (CNT) Composites for Use in Artificial Joints', in Trans Tech Publications, Taipei-Taiwan, presented at
, 2016, 'Lubricated Wear of Machinable Lithium Disilicate Glass Ceramic', in Key Engineering Materials, Trans Tech Publications, Taiwan, pp. 18 - 22, presented at
, 2016, 'Electromagnetic interference in vibration signals and its effect on bearing diagnostics', in VIRM 11 - Vibrations in Rotating Machinery, Institution of Mechanical Engineers, Manchester, UK, pp. 523 - 533, presented at
, 2015, 'Detecting changes in gear surface roughness using vibration signals', in Acoustics 2015 Hunter Valley, Hunter Valley, Australia, presented at
, 2015, 'Fault severity trending in rolling element bearings', in Acoustics 2015 Hunter Valley, Hunter Valley, Australia, presented at
, 2015, 'Dynamic Simulation of IC Engine Bearings for Fault Detection and Wear Prediction', in International Science Index, 17 (11) Part II, Venice, Italy, presented at
, 2014, 'A Simulation Model To Study The Potential Use Of Micro- Structured Surfaces To Improve The Tribological Properties Of UHMWPE', in The 8th Australasian Congress on Applied Mechanics 2014: ACAM 8, Engineers Australia, Melbourne, presented at
, 2014, 'Challenges and strategies in teaching engineering mechanics', in The 8th Australasian Congress on Applied Mechanics 2014 : ACAM 8, Engineers Australia, Melbourne, presented at
, 2014, 'The investigation of the wear behaviour of artificial joint at a macro and nano scale', in The 8th Australasian Congress on Applied Mechanics 2014, Melbourne, presented at
, 2014, 'Wear Properties Of Machinable Lithium Disilicate Glass Ceramic', in The 8th Australasian Congress on Applied Mechanics 2014 : ACAM 8 / National Committee on Applied Mechanics of Engineers Australia., Melbourne, presented at
, 2014, 'Abrasive wear behaviour of machinable lithium disilicate glass ceramic', in 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014, pp. 185 - 190
, 2014, 'Vibration-based spall size tracking in rolling element bearings', in Proceedings of the 9th IFToMM International Conference on Rotor Dynamics, presented at
, 2014, 'Vibration-based spall size tracking in rolling element
bearings', in Proceedings of the 9th IFToMM International Conference on Rotor Dynamics, Milan, Italy, presented at
, 2013, 'Development of an expert system for automatic osteoarthritis diagnosis using numerical characterisations of articular cartilages and wear particles', in 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics: Mechatronics for Human Wellbeing, AIM 2013, pp. 194 - 198, http://dx.doi.org/10.1109/AIM.2013.6584091
, 2012, 'Investigation of Nano-Mechanical Properties of Cartilages of Sheep Knee Joints', in Proceedings of 7th Australasian Congress of Applied Mechanics, Engineers Australia, Canberra ACT, pp. 315 - 321, presented at
, 2012, 'Teaching First Year Engineering Dynamics at a Small and Large Australian University', in Proceedings of 7th Australasian Congress of Applied Mechanics, Engineers Australia, Canberra ACT, pp. 1108 - 1112, presented at
, 2012, 'Teaching first year engineering dynamics at a small and large Australian University', in Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 1106 - 1112
, 2009, 'Improved acoustical wave propagator technique for acoustic-structure interaction in a duct silencer structure with/without membrane', in 16th International Congress on Sound and Vibration 2009, ICSV 2009, pp. 4324 - 4331
, 2009, 'In-situ monitoring of active crack in steel structure using acoustic emission technique', in 2009 International Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2009, pp. 229 - 232, http://dx.doi.org/10.1109/ICMTMA.2009.384
, 2008, 'Machine Condition Monitoring and Remaining Life Prediction Using Integrated Approach', in Luo JB; Meng YG; Shao TM; Zhao Q (eds.), ADVANCED TRIBOLOGY, TSINGHUA UNIV PRESS, PEOPLES R CHINA, Beijing, pp. 949 - +, presented at
, 2007, 'Wear oriented strategy for gearbox remaining lifetime estimation', in 14th International Congress on Sound and Vibration 2007, ICSV 2007, pp. 3702 - 3709
, 2007, 'Smart condition monitoring by integration of vibration, oil and wear particle analysis.', in ICSV14 2007: 14th International Congress on Sound and Vibration, Cairns, Qld, presented at
, 2005, 'Implementation of network-computing and NN based remote real-time oil well monitoring system', in Proceedings of 2005 International Conference on Neural Networks and Brain Proceedings, ICNNB'05, pp. 1810 - 1814
, 2000, 'Wear particle analysis for machine condition monitoring using computer technologies', in Mathew J; Zhong B (ed.), SYSTEMS INTEGRITY AND MAINTENANCE, PROCEEDINGS, QUEENSLAND UNIVERSITY TECHNOLOGY, PEOPLES R CHINA, NANJING, pp. 321 - 326, presented at
https://orcid.org/0000-0002-3059-5813