ORCID as entered in ROS
https://orcid.org/0000-0003-2538-5552
Select Publications
Conference Papers
, 2023, 'An Artificial Neural Network Model for Predicting Hydraulic Diameters in Pillow-Plate Heat Exchangers', in Tokumasu T; Ahn J (ed.), Twentieth International Conference on Flow Dynamics (ICFD2023), Institute of Fluid Science, Tohoku University, Sendai, Miyagi, Japan, presented at
, 2023, 'A Novel Method in Predicting Heat Transfer Coefficient and Pressure Drop in Pillow-Plate Heat Exchangers', in Twentieth International Conference on Flow Dynamics (ICFD2023), Institute of Fluid Science, Tohoku University, Sendai, Miyagi, Japan, presented at
, 2022, 'Investigation of a 75mm axial flow hydrocyclone for industrial use: an alternative to the reverse flow hydrocyclone', in Proceedings of the 23rd Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, University of Sydney, Australia, presented at
, 2020, 'CFD analysis to estimate the best validation approach for reverse flow hydrocyclone', in 22nd Australasian Fluid Mechanics Conference, AFMC 2020, University of Queensland Library, presented at
, 2019, 'Effect of electrostatic repulsion induced by superplasticizers on the flow behaviour of fly ash pastes', in Sustainable Construction Materials and Technologies, Coventry University, Lanchester Library, Kingston University London, UK, pp. 164 - 176, presented at
, 2018, 'A Low Cost Extensional Viscometer for Small Relaxation Times', in Lau TCW; Kelso R (ed.), Proceedings of the 21st Australasian Fluid Mechanics Conference, The University of Adelaide, Adelaide, presented at
, 2018, 'Molecular dynamics study on the structural and dynamic properties of xanthan gum in a dilute solution under the effect of temperature', in Ha DT; Vyas A; BoitelConti M; Ludwig M; Ruml T; Wang FM; Truong DH; Dao TT (eds.), AIP Conference Proceedings, AIP Publishing, VIETNAM, Ton Duc Thang Univ, Ho Chi Minh City, pp. 030008, presented at
, 2018, 'A low cost extensional viscometer for small relaxation times', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018, http://dx.doi.org/10.26190/unsworks/27668
, 2016, 'Simulation and experimental validation of an axial-flow hydrocyclone', in Ivey G; Tongming Z; Jones N; Draper S (eds.), Proceedings of the 20th Australasian fluid mechanics conference, University of WEstern Australia, Perth, presented at
, 2016, 'Simulation and experimental validation of an axial-flow hydrocyclone', in Proceedings of the 20th Australasian Fluid Mechanics Conference, AFMC 2016
, 2016, 'Simulation and experimental validation of an axial-flow hydrocyclone', in Proceedings of the 20th Australasian Fluid Mechanics Conference, AFMC 2016
, 2014, 'Drop Formation At A T-Junction With Dilute Xanthan Gum Solutions As The Dispersed Phase', in Chowdhury H; Alam F (ed.), Proceedings of the 19th Australasian Fluid Mechanics Conference, RMIT University, Melbourne, presented at
, 2013, 'A general procedure for solving the population balance equation in flocculating suspensions', in Particle Technology Forum 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future, pp. 97 - 99
, 2013, 'Experimental and computational study of the causes of the fishhook effect in a mini-hydrocyclone', in Separations Division 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future, pp. 178 - 181
, 2012, 'A force balance model for the size prediction of droplets formed at T-junction with xanthan gum solutions', in Proceedings of the Eighteenth Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Launceston, TAS, pp. 1 - 4, presented at
, 2012, 'Dip and drift in spin bowling', in Proceedings of the Eighteenth Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Launceston, TAS, pp. 1 - 4, presented at
, 2012, 'Experimental study of the causes of the fishhook effect in a mini-Hydrocyclone', in Proceedings of the Eighteenth Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Launceston, TAS, pp. 1 - 4, presented at
, 2012, 'Investigation on the droplet formation time with xanthan gum solutions at a T-junction', in Proceedings of the ASME 2012 Fluids Engineering Division Summer Meeting FEDSM2012, ASME, New York, pp. 1 - 9, presented at
, 2012, 'Study of the transitional flow and particle separation with a fishhook effect in a mini-hydrocyclone', in Proceedings of the ASME 2012 Fluids Engineering Division Summer Meeting FEDSM2012, ASME, New York, pp. 1 - 10, presented at
, 2012, 'Micro-droplet formation with non-Newtonian solutions in microfluidic T-junctions with different inlet angles', in 2012 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2012, pp. 423 - 428, http://dx.doi.org/10.1109/NEMS.2012.6196809
, 2012, 'Micro-droplet formation with non-Newtonian solutions in microfluidic T-junctions with different inlet angles', in IEEE-NEMS 2012 Proceedings, Kyoto, Japan, pp. 548 - 553, presented at
, 2012, 'Study of the transitional flow and particle separation with a fishhook effect in a mini-hydrocyclone', in American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM, pp. 289 - 298, http://dx.doi.org/10.1115/FEDSM2012-72095
, 2011, 'COMPUTATIONAL STUDY OF CENTRIFUGAL INSTABILITIES IN A MICRO-SIZED HYDROCYCLONE', in Chemeca 2011, Engineers Australia, Sydney, pp. 1 - 11, presented at
, 2011, 'MICRODROPLET FORMATION IN A T-JUNCTION WITH XANTHAN GUM SOLUTIONS', in Chemeca 2011, Engineers Australia, Sydney, pp. 1 - 10, presented at
, 2010, 'Cold Modelling of Two Phase Separation in a Rotary Holding Furnace', in 17th Australasian Fluid Mechanics conference, The University of Auckland, Auckland, NZ, pp. 812 - 815, presented at
, 2010, 'Computational Study of Flow in a Micro-Sized Hydrocyclone', in 17th Australasian Fluid Mechanics conference, The University of Auckland, Auckland, NZ, pp. 51 - 54, presented at
, 2009, 'Influence of cationic flocculant properties on the flocculation of yeast suspensions', in Chemeca 2009, Engineers Australia, Australia, presented at
, 2008, 'High framing rate PIV studies of an impinging water drop', in Proceedings of SPIE vol 7126: 28th International Congress on High-Speed Imaging and Photonics, Society of Photo-Optical Instrumentation Engineers, Bellingham, WA, USA, presented at
, 2008, 'Surface Profiles of Collapsing Cavities of Splash Drops', in Denier J; Finn M; Mattner T (eds.), CD-ROM, Adelaide, Sth Aust, presented at
, 2007, 'Bubble entrapment mechanisms during the impact of water drop', in 16th Australasian Fluid Mechanics Conference, Gold Coast, Qld, presented at
, 2007, 'Control of acid mist formation in the electrowinning of copper', in Chemeca 2007: Academics and Industry Strengthening the Profession, Melbourne, Australia, presented at
, 2005, 'High-framing rate PIV for vortex ring visualisation', in Proceedings of the 4th Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion, University of Adelaide, School of Mechanical Engineering, Adelaide, presented at
, 2005, 'Entrapment and rupture of large air pockets in liquid-liquid impacts', in 33rd Australasian Chemical Engineering Conference (CHEMECA 2005): Smart Solutions-Doing More With Less, Curran Associates, Inc., New York, presented at
, 2005, 'Modelling the mixing in an elliptic top submerged gas injected vessel', in 33rd Australasian Chemical Engineering Conference (CHEMECA 2005): Smart Solutions-Doing More With Less, Curran Associates, Inc., New York, presented at
, 2004, 'Bubble entrapment during water drop impacts', in Proceedings of the Fifteenth Australasian Fluid Mechanics Conference, The University of Sydney, Sydney, presented at
, 2004, 'Numerical simulation of drop formation in a T-shaped microchannel', in Proceedings of the Fifteenth Australasian Fluid Mechanics Conference, The University of Sydney, Sydney, presented at
, 2004, 'Drop formation in T-junction microchannels', in 32nd Australasian Chemical Engineering Conference, Sydney, presented at
, 2004, 'CFD model development for a final effect evaporator', in Proceedings of the Association of Sugar Cane Technologists, Brisbane, Australia, presented at
, 2003, 'CFD modelling of a sugar evaporator', in Proceedings of the third International Conference on Computational Fluid Dynamics in the Minerals and Process Industries, Melbourne, presented at
, 2003, 'LES of turbulent bubble formation and break-up based on interface tracking', in Direct and Large-Eddy Simulation V, Springer, Munich university of Technology, presented at
, 2003, 'LES of turbulent bubble formation and break-up using interface tracking-based simulation', in Direct and Large-Eddy Simulation V, Springer, Munich university of Technology, presented at
, 1999, 'Modelling of slag-skimming in a Peirce-Smith converter', in 4th International Conference COPPER 99-COBRE 99, pp. 417 - 431
, 1998, 'Entrainment phenomena associated with multi-liquid flow over a weir', in Proceedings of the 1998 Thirteenth Australasian Fluid Mechanics Conference, Melbourne, Australia, 13-18 December 1998 (Volume 2), pp. 925 - 928
, 1998, 'Slag-metal flow over a weir', in Proceedings of the 1998 Thirteenth Australasian Fluid Mechanics Conference, Melbourne, Australia, 13-18 December 1998, pp. 445 - 448
, 1997, 'Finite difference method for modelling impacting drops', in American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED
, 1996, 'Dynamics of splash formation in gas injected systems', in The Howard Worner International Symposium on Injection in Pyrometallurgy, pp. 175 - 185
, 1996, 'Experimental methods in gas injection into liquid systems', in The Howard Worner International Symposium on Injection in Pyrometallurgy, pp. 221 - 236
, 1996, 'Interactions of large gas bubbles with fluid interfaces', in TMS Annual Meeting, pp. 175 - 188
, 1993, 'Effect of splash generation on the performance of gas injected processes', in First International Conference on Processing Materials for Properties, pp. 341 - 344
Filter by type
https://orcid.org/0000-0003-2538-5552