By Dr Jong-Leng Liow

Book Chapters

Liow JL; Khennane A; Gigar FZ; Katoozi E, 2024, 'Recycled Wood-Geopolymer Concrete Blocks as Sustainable Material', in , pp. 1585 - 1595, http://dx.doi.org/10.1007/978-3-031-50349-8_137

Gigar FZ; Khennane A; Liow JL; Tekle BH, 2023, 'Effect of Wood/Binder Ratio, Slag/Binder Ratio, and Alkaline Dosage on the Compressive Strength of Wood-Geopolymer Composites', in , pp. 658 - 667, http://dx.doi.org/10.1007/978-3-031-32519-9_64

Liow JL; Khennane A; Muley M; Sorial H; Katoozi E, 2022, 'Recycling of Chrome-Copper-Arsenic Timber Through Cement Particleboard Manufacture', in Sustainable Production, Life Cycle Engineering and Management, pp. 111 - 122, http://dx.doi.org/10.1007/978-3-030-90217-9_10

Liow J-L, 2013, 'Environmental Impact in Micro-Device Manufacturing', in Davim JP (ed.), Sustainable Manufacturing, Wiley, NY, pp. 1 - 32, http://dx.doi.org/10.1002/9781118621653.ch1

Liow J-L, 2002, 'Splash Formation by Water Drops', in Drop-Surface Interactions, Springer Vienna, pp. 299 - 302, http://dx.doi.org/10.1007/978-3-7091-2594-6_14

Journal articles

Gigar FZ; Khennane A; Liow J-L; Al-Deen S; Tekle BH; Fitzgerald CJ; Basaglia A; Webster CL, 2024, 'Advancing Sustainable Construction Materials: Wood, Rubber, and Cenospheres Geopolymer Masonry Units Development', Sustainability, 16, pp. 3283 - 3283, http://dx.doi.org/10.3390/su16083283

Sabourishirazi A; Ghodrat M; Liow JL; Behnia M, 2023, 'Recent advances in design and performance optimization of pillow-plate heat exchangers: a critical review', Journal of Thermal Analysis and Calorimetry, 148, pp. 13679 - 13707, http://dx.doi.org/10.1007/s10973-023-12571-w

Wang C; Kayali O; Liow JL; Troitzsch U, 2023, 'Participation and disturbance of superplasticisers in early-stage reaction of class F fly ash-based geopolymer', Construction and Building Materials, 403, http://dx.doi.org/10.1016/j.conbuildmat.2023.133176

Gigar FZ; Khennane A; Liow JL; Tekle BH; Katoozi E, 2023, 'Recycling timber waste into geopolymer cement bonded wood composites', Construction and Building Materials, 400, http://dx.doi.org/10.1016/j.conbuildmat.2023.132793

Wang C; Kayali O; Liow JL, 2021, 'The effectiveness and mechanisms of superplasticisers in dispersing class F fly ash pastes', Powder Technology, 392, pp. 81 - 92, http://dx.doi.org/10.1016/j.powtec.2021.06.054

Gao R; Sharipov F; Liow JL; O'Byrne S, 2020, 'Experimental investigation of the separation of binary gaseous mixtures flowing through a capillary tube', Physics of Fluids, 32, pp. 112008, http://dx.doi.org/10.1063/5.0024928

Ong EES; O’Byrne S; Liow JL; Ong E; O'Byrne S, 2019, 'Yield stress measurement of a thixotropic colloid', Rheologica Acta, 58, pp. 383 - 401, http://dx.doi.org/10.1007/s00397-019-01154-y

Ong EES; Liow JL; Ong E, 2019, 'The temperature-dependent structure, hydrogen bonding and other related dynamic properties of the standard TIP3P and CHARMM-modified TIP3P water models', Fluid Phase Equilibria, 481, pp. 55 - 65, http://dx.doi.org/10.1016/j.fluid.2018.10.016

Gao R; O'Byrne S; Liow JL; Boyson TK, 2018, 'An experimental study of pressure distribution nonlinearity in a circular micro-tube', Experimental Thermal and Fluid Science, 97, pp. 468 - 483, http://dx.doi.org/10.1016/j.expthermflusci.2018.05.020

Liow JL; Oakman OA, 2018, 'Performance of mini-axial hydrocyclones', Minerals Engineering, 122, pp. 67 - 78, http://dx.doi.org/10.1016/j.mineng.2018.03.024

Gao R; O Byrne S; Sheehe SL; Kurtz J; Liow JL; O'Byrne S, 2017, 'Transient gas viscosity measurement using tunable diode laser absorption spectroscopy', Experiments in Fluids, 58, pp. 156, http://dx.doi.org/10.1007/s00348-017-2438-3

Khaleque A; Mironov EG; Osório JH; Li Z; Cordeiro CMB; Liu L; Franco MAR; Liow JL; Hattori HT, 2017, 'Integration of bow-tie plasmonic nanoantennas on tapered fibers', Optics Express, 25, pp. 8986 - 8996, http://dx.doi.org/10.1364/OE.25.008986

Huang Y; Chen J; Wong T; Liow JL, 2016, 'Experimental and theoretical investigations of non-Newtonian electro-osmotic driven flow in rectangular microchannels', Soft Matter, 12, pp. 6206 - 6213, http://dx.doi.org/10.1039/c6sm00408c

Zhu G; Liow JL; Neely A, 2015, 'Response to comment on "Experimental study of particle separation and the fish hook effect in a mini-hydrocyclone" [Chem. Eng. Sci. 111 (2014) 94-105]', Chemical Engineering Science, 122, pp. 104 - 105, http://dx.doi.org/10.1016/j.ces.2014.08.059

Zhu G; Liow JL; Neely A, 2014, 'Corrigendum to "Experimental study of particle separation and the Fishhook effect in a mini-hydrocyclone" [Chem. Eng. Sci. 111 (2014) 94-105]', Chemical Engineering Science, 118, pp. 280, http://dx.doi.org/10.1016/j.ces.2014.08.012

Yeow YL; Liow JL; Leong YK, 2014, 'Obtaining model-independent growth rates from experimental data of dry thermal oxidation of silicon', AIChE Journal, 60, pp. 1810 - 1820, http://dx.doi.org/10.1002/aic.14375

Zhu G; Liow J-L; Neely A, 2014, 'Experimental study of particle separation and the fishhook effect in a mini-hydrocyclone', Chemical Engineering Science, 111, pp. 94 - 105, http://dx.doi.org/10.1016/j.ces.2014.02.017

Mondal S; Leong YK; Liow J; Wickramasinghe SR, 2013, 'Flocculation of yeast suspensions by a cationic flocculant', Powder Technology, 235, pp. 426 - 430, http://dx.doi.org/10.1016/j.powtec.2012.10.030

Yeow YL; Guan ; Wu ; Yap ; Liow J; Leong YK, 2013, 'Obtaining the Kinetic Function of Depolymerization from Evolving Molecular Weight Distribution Data–An Inverse Problem', AIChE Journal, 59, pp. 912 - 922, http://dx.doi.org/10.1002/aic.13878

Gu Z; Liow JL; Zhu G, 2012, 'Investigation on the droplet formation time with Xanthan Gum solutions at a T-junction', American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM, 2, pp. 299 - 307, http://dx.doi.org/10.1115/FEDSM2012-72133

Liow J; Burrows AS; Brady K, 2012, 'Residence time study of a two-phase mixture in a horizontal cylindrical vessel', Chemical Engineering Research and Design, 90, pp. 2155 - 2163, http://dx.doi.org/10.1016/j.cherd.2012.06.008

Rahman SMM; Liow JL, 2012, 'Development of a trajectory-based 3D surface roughness model for the micro end-milling process', Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 419 - 424

Yeow YL; Liow J; Leong YK, 2012, 'A General Procedure for Obtaining the Evolving Particle Size Distribution of Flocculating Suspensions', AIChE Journal, 58, pp. 3043 - 3053, http://dx.doi.org/10.1002/aic.13710

Jing X; Li H; Wang J; Liow J, 2012, 'An experimental study of cutting forces in micro end-milling', Advanced Materials Research, 500, pp. 357 - 362, http://dx.doi.org/10.4028/www.scientific.net/AMR.500.357

Zhu G; Liow J; Neely AJ, 2012, 'Computational study of the flow characteristics and separation efficiency in a mini-hydrocyclone', Chemical Engineering Research and Design : Official Journal of the European Federation of Chemical Engineering: Part A, 90, pp. 2135 - 2147, http://dx.doi.org/10.1016/j.cherd.2012.05.020

Burrows A; Liow J; Brady K, 2012, 'Residence time study of a two-phase mixture in a horizontal cylindrical vessel', Chemical Engineering Research and Design : Official Journal of the European Federation of Chemical Engineering: Part A, 90, pp. 2155 - 2163, http://dx.doi.org/10.1016/j.cherd.2012.06.008

Wickramasinghe SR; Leong YK; Mondal S; Liow J, 2010, 'Influence of cationic flocculant properties on the flocculation of yeast suspensions', Advanced Powder Technology, 21, pp. 374 - 379, http://dx.doi.org/10.1016/j.apt.2010.02.006

Liow J, 2010, 'Modelling and Simulation of Cutting Forces in Micromachining', Key Engineering Materials, 443, pp. 652 - 656, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.652

Liow J; Frye U, 2010, 'Surfaces Machined by Micro End-Mills at Constant Chip Load', Key Engineering Materials, 443, pp. 232 - 237, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.232

Jegatheesan V; Shu L; Liow JL; Sivakugan N, 2009, 'Editorial: Diverse challenges faced in developing sustainable catchments', Water, Air, and Soil Pollution: Focus, 9, pp. 321 - 322, http://dx.doi.org/10.1007/s11267-009-9222-1

Liow J, 2009, 'Mechanical micromachining: a sustainable micro-device manufacturing approach?', Journal of Cleaner Production, 17, pp. 1 - 6, http://dx.doi.org/10.1016/j.jclepro.2008.11.012

Jegatheesan V; Liow J; Shu L; Kim SH; Visvanathan C, 2009, 'The need for global coordination in sustainable development', Journal of Cleaner Production, 17, pp. 1 - 7, http://dx.doi.org/10.1016/j.jclepro.2008.11.016

Liow J, 2008, 'Peer assessment in Thesis oral presentations', European Journal of Engineering Education, 33, pp. 525 - 537

Liovic P; Liovic P; Liow J; Lakehal D; Kothe D, 2006, 'A 3D unsplit advection volume tracking with planarity-preserving interface reconstruction', Computers and Fluids, 35, pp. 1011 - 1032

Campbell GR; Leong YK; Berndt CC; Liow J, 2006, 'Ammonium phosphate slurry rheology and particle properties—The influence of Fe(III) and Al(III) impurities, solid concentration and degree of neutralization', Chemical Engineering Science, 61, pp. 5856 - 5866, http://dx.doi.org/10.1016/j.ces.2006.05.010

Liow J; Juusela M; Gray NB; Sutalo ID, 2003, 'Entrainment of a two-layer liquid through a tap-hole', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, 34B, pp. 821 - 832

Liow JL, 2002, 'Sloshing of Melts in a Bath Smelting Process Having an Elliptic Cross Section', ISIJ International, 42, pp. 692 - 701

Liow J; Liovic P; Rudman M, 2002, 'Numerical modelling of free surface flows in metallurgical vessels', , 26, pp. 113 - 140

Liow JL, 2002, 'Sloshing of melts in a bath smelting process having an elliptic cross section', ISIJ International, 42, pp. 694 - 701, http://dx.doi.org/10.2355/isijinternational.42.694

Liovic P; Liow J-L; Rudman M, 2001, 'A Volume of Fluid (VOF) Method for the Simulation of Metallurgical Flows', ISIJ International, 41, pp. 225 - 233, http://dx.doi.org/10.2355/isijinternational.41.225

Liow J, 2001, 'Splash formation by spherical drops', Journal of Fluid Mechanics, 427, pp. 73 - 106

Morton D; Rudman M; Jong-Leng L, 2000, 'An investigation of the flow regimes resulting from splashing drops', Physics of Fluids, 12, pp. 747 - 763, http://dx.doi.org/10.1063/1.870332

Liow J-L, 2000, 'Quasi-equilibrium bubble formation during top-submerged gas injection', Chemical Engineering Science, 55, pp. 4515 - 4524, http://dx.doi.org/10.1016/S0009-2509(00)00095-6

Lawson NJ; Rudman M; Guerra A; Liow J-L, 1999, 'Experimental and numerical comparisons of the break-up of a large bubble', Experiments in Fluids, 26, pp. 524 - 534, http://dx.doi.org/10.1007/s003480050319

LIOW J; TSIRIKIS P; GRAY N, 1998, 'Study of refractory wear in the tuyere region of a peirce-smith nickel convertor', Canadian Metallurgical Quarterly, 37, pp. 99 - 117, http://dx.doi.org/10.1016/S0008-4433(98)00003-2

Back to profile page