Select Publications
Book Chapters
2021, 'Electron Microscopy Methods', in Encyclopedia of Materials: Metals and Alloys, pp. 203 - 211, http://dx.doi.org/10.1016/B978-0-12-819726-4.00031-4
,Journal articles
2024, 'New insights into the character of austenite-ferrite boundaries in an additively manufactured duplex stainless steel', Scripta Materialia, 245, http://dx.doi.org/10.1016/j.scriptamat.2024.116049
,2024, 'Interphase boundary segregation in IN738 manufactured via electron-beam powder bed fusion', Scripta Materialia, 244, http://dx.doi.org/10.1016/j.scriptamat.2024.116033
,2024, 'Thermal cycle induced solid-state phase evolution in IN718 during additive manufacturing: A physical simulation study', Journal of Alloys and Compounds, 976, http://dx.doi.org/10.1016/j.jallcom.2023.173181
,2024, 'Effect of compositional variations on the heat treatment response in 17-4 PH stainless steel fabricated by laser powder bed fusion', Materials Characterization, 209, http://dx.doi.org/10.1016/j.matchar.2024.113768
,2024, 'Site-specific Cu clustering and precipitation in laser powder-bed fusion 17–4 PH stainless steel', Scripta Materialia, 241, http://dx.doi.org/10.1016/j.scriptamat.2023.115891
,2024, 'Grain boundary network evolution in electron-beam powder bed fusion nickel-based superalloy Inconel 738', Journal of Alloys and Compounds, 972, http://dx.doi.org/10.1016/j.jallcom.2023.172811
,2024, 'Effect of compositional heterogeneity on the mechanical properties of a single-phase Cu-9Al alloy with different grain sizes', Acta Materialia, 263, http://dx.doi.org/10.1016/j.actamat.2023.119531
,2023, 'Predicting solid-state phase transformations during metal additive manufacturing: A case study on electron-beam powder bed fusion of Inconel-738', Additive Manufacturing, 76, http://dx.doi.org/10.1016/j.addma.2023.103771
,2023, 'Experimental and computational analysis of site-specific formation of phases in laser powder bed fusion 17–4 precipitate hardened stainless steel', Additive Manufacturing, 73, http://dx.doi.org/10.1016/j.addma.2023.103686
,2023, 'Advancing analytical electron microscopy methodologies to characterise microstructural features in superalloys', Ultramicroscopy, 247, http://dx.doi.org/10.1016/j.ultramic.2023.113699
,2023, 'Dynamic recrystallisation via nucleation at distorted twins in a Ni-based superalloy', Journal of Alloys and Compounds, 936, http://dx.doi.org/10.1016/j.jallcom.2022.168318
,2023, 'Heat treatment for metal additive manufacturing', Progress in Materials Science, 133, http://dx.doi.org/10.1016/j.pmatsci.2022.101051
,2022, 'Introducing C phase in additively manufactured Ti-6Al-4V: A new oxygen-stabilized face-centred cubic solid solution with improved mechanical properties', Materials Today, 61, pp. 11 - 21, http://dx.doi.org/10.1016/j.mattod.2022.10.026
,2022, 'Electron and laser-based additive manufacturing of Ni-based superalloys: A review of heterogeneities in microstructure and mechanical properties', Materials and Design, 223, http://dx.doi.org/10.1016/j.matdes.2022.111245
,2022, 'Evidence of in-situ Cu clustering as a function of laser power during laser powder bed fusion of 17–4 PH stainless steel', Scripta Materialia, 219, http://dx.doi.org/10.1016/j.scriptamat.2022.114896
,2022, 'Formation of intergranular phases in precipitation hardening nickel-based alloy 725', Acta Materialia, 236, http://dx.doi.org/10.1016/j.actamat.2022.118108
,2022, 'On the microstructure and texture evolution in 17-4 PH stainless steel during laser powder bed fusion: Towards textural design', Journal of Materials Science and Technology, 117, pp. 183 - 195, http://dx.doi.org/10.1016/j.jmst.2021.12.015
,2022, 'Powder bed fusion additive manufacturing of Ni-based superalloys: a review of the main microstructural constituents and characterization techniques', Journal of Materials Science, 57, pp. 14135 - 14187, http://dx.doi.org/10.1007/s10853-022-07501-4
,2022, 'Intergranular precipitation and chemical fluctuations in an additively manufactured 2205 duplex stainless steel', Scripta Materialia, http://dx.doi.org/10.1016/j.scriptamat.2022.114894
,2022, 'Texture evolution in a CrMnFeCoNi high-entropy alloy manufactured by laser powder bed fusion', Journal of Materials Science, 57, pp. 9714 - 9725, http://dx.doi.org/10.1007/s10853-022-07025-x
,2022, 'Enhancing the repassivation ability and localised corrosion resistance of an additively manufactured duplex stainless steel by post-processing heat treatment', Corrosion Science, 198, http://dx.doi.org/10.1016/j.corsci.2022.110106
,2022, 'Evolution of microstructure and mechanical properties in 2205 duplex stainless steels during additive manufacturing and heat treatment', Materials Science and Engineering: A, 835, http://dx.doi.org/10.1016/j.msea.2022.142695
,2022, 'Multi-scale characterisation of microstructure and texture of 316L stainless steel manufactured by laser powder bed fusion', Materials Characterization, 184, http://dx.doi.org/10.1016/j.matchar.2021.111663
,2022, 'Temperature sensitivity maps of silicon wafers from photoluminescence imaging: The effect of gettering and hydrogenation', Progress in Photovoltaics: Research and Applications, http://dx.doi.org/10.1002/pip.3579
,2021, 'On the pitting corrosion of 2205 duplex stainless steel produced by laser powder bed fusion additive manufacturing in the as-built and post-processed conditions', Materials and Design, 212, http://dx.doi.org/10.1016/j.matdes.2021.110260
,2021, 'Formation and 3D morphology of interconnected α microstructures in additively manufactured Ti-6Al-4V', Materialia, 20, http://dx.doi.org/10.1016/j.mtla.2021.101201
,2021, '3D electron backscatter diffraction characterization of fine α titanium microstructures: collection, reconstruction, and analysis methods', Ultramicroscopy, 230, http://dx.doi.org/10.1016/j.ultramic.2021.113394
,2021, 'Microstructure-property gradients in Ni-based superalloy (Inconel 738) additively manufactured via electron beam powder bed fusion', Additive Manufacturing, 46, http://dx.doi.org/10.1016/j.addma.2021.102121
,2021, '3D characterization of microstructural evolution and variant selection in additively manufactured Ti-6Al-4 V', Journal of Materials Science, 56, pp. 14763 - 14782, http://dx.doi.org/10.1007/s10853-021-06216-2
,2021, 'Grain boundary character distribution in an additively manufactured austenitic stainless steel', Scripta Materialia, 192, pp. 115 - 119, http://dx.doi.org/10.1016/j.scriptamat.2020.10.018
,2021, 'Additive manufacturing of steels: a review of achievements and challenges', Journal of Materials Science, 56, pp. 64 - 107, http://dx.doi.org/10.1007/s10853-020-05109-0
,2020, 'Effect of scanning strategy on variant selection in additively manufactured Ti-6Al-4V', Additive Manufacturing, 36, http://dx.doi.org/10.1016/j.addma.2020.101581
,2020, 'Five-parameter characterization of intervariant boundaries in additively manufactured Ti-6Al-4V', Materials and Design, 196, http://dx.doi.org/10.1016/j.matdes.2020.109177
,2020, 'Multimodal γ′ precipitation in Inconel-738 Ni-based superalloy during electron-beam powder bed fusion additive manufacturing', Journal of Materials Science, 55, pp. 13342 - 13350, http://dx.doi.org/10.1007/s10853-020-04915-w
,2020, 'On the enhanced wear resistance of CoCrFeMnNi high entropy alloy at intermediate temperature', Scripta Materialia, 186, pp. 230 - 235, http://dx.doi.org/10.1016/j.scriptamat.2020.05.053
,2020, 'Dynamic recrystallization in Al
2020, 'New insights into the interface characteristics of a duplex stainless steel subjected to accelerated ferrite-to-austenite transformation', Journal of Materials Science, 55, pp. 5322 - 5339, http://dx.doi.org/10.1007/s10853-020-04358-3
,2020, 'On the hot-worked microstructure of a face-centered cubic Al
2019, 'On the unusual intergranular corrosion resistance of 316L stainless steel additively manufactured by selective laser melting', Corrosion Science, 161, http://dx.doi.org/10.1016/j.corsci.2019.108189
,2019, 'The scratch behaviour of Al
2019, 'The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures', Wear, 428-429, pp. 32 - 44, http://dx.doi.org/10.1016/j.wear.2019.03.002
,2019, 'Static recrystallization and grain growth behaviour of Al
2019, 'The effect of phase transformation route on the intergranular corrosion susceptibility of 2205 duplex stainless steel', Materials Letters, 238, pp. 26 - 30, http://dx.doi.org/10.1016/j.matlet.2018.11.143
,2019, 'Dynamic recrystallization behaviour of Al
2019, 'Microstructure dependence of impact toughness in duplex stainless steels', Materials Science and Engineering: A, 745, pp. 369 - 378, http://dx.doi.org/10.1016/j.msea.2018.12.117
,2018, 'Five-parameter crystallographic characteristics of the interfaces formed during ferrite to austenite transformation in a duplex stainless steel', Philosophical Magazine, 98, pp. 1284 - 1306, http://dx.doi.org/10.1080/14786435.2018.1434321
,2018, 'Effect of ferrite-to-austenite phase transformation path on the interface crystallographic character distributions in a duplex stainless steel', Acta Materialia, 145, pp. 196 - 209, http://dx.doi.org/10.1016/j.actamat.2017.11.057
,2017, 'Strain rate dependence of ferrite dynamic restoration mechanism in a duplex low-density steel', Materials and Design, 132, pp. 360 - 366, http://dx.doi.org/10.1016/j.matdes.2017.07.009
,2017, 'Dynamic Restoration Processes in a 23Cr-6Ni-3Mo Duplex Stainless Steel: Effect of Austenite Morphology and Interface Characteristics', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 48, pp. 4803 - 4820, http://dx.doi.org/10.1007/s11661-017-4227-2
,