By Dr Ondrej Muransky

Journal articles

Yang C; Wei T; Muránsky O; Carr D; Huang H; Zhou X, 2018, 'The effect of ball-milling time and annealing temperature on fracture toughness of Ni-3 wt.% SiC using small punch testing', Materials Characterization, 138, pp. 289 - 295, http://dx.doi.org/10.1016/j.matchar.2018.02.024

Kirkwood HJ; de Jonge MD; Muránsky O; Hofmann F; Howard DL; Ryan CG; van Riessen G; Rowles MR; Paradowska AM; Abbey B, 2018, 'Simultaneous X-ray diffraction, crystallography and fluorescence mapping using the Maia detector', Acta Materialia, 144, pp. 1 - 10, http://dx.doi.org/10.1016/j.actamat.2017.10.025

Yang C; Muránsky O; Zhu H; Thorogood GJ; Avdeev M; Huang H; Zhou X; Muransky O, 2017, 'The effect of milling time on the microstructural characteristics and strengthening mechanisms of NiMo-SiC Alloys prepared via powder metallurgy', Materials, 10, pp. 389, http://dx.doi.org/10.3390/ma10040389

Li L; Muránsky O; Flores-Johnson EA; Kabra S; Shen L; Proust G, 2017, 'Effects of strain rate on the microstructure evolution and mechanical response of magnesium alloy AZ31', Materials Science and Engineering: A, 684, pp. 37 - 46, http://dx.doi.org/10.1016/j.msea.2016.12.015

Yang C; Muránsky O; Zhu H; Thorogood GJ; Huang H; Zhou X, 2017, 'On the origin of strengthening mechanisms in Ni-Mo alloys prepared via powder metallurgy', Materials and Design, 113, pp. 223 - 231, http://dx.doi.org/10.1016/j.matdes.2016.10.024

Hosseinzadeh F; Traore Y; Bouchard PJ; Muránsky O, 2016, 'Mitigating cutting-induced plasticity in the contour method, part 1: Experimental', International Journal of Solids and Structures, 94-95, pp. 247 - 253, http://dx.doi.org/10.1016/j.ijsolstr.2015.12.034

Muránsky O; Hamelin CJ; Hosseinzadeh F; Prime MB, 2016, 'Mitigating cutting-induced plasticity in the contour method. Part 2: Numerical analysis', International Journal of Solids and Structures, 94-95, pp. 254 - 262, http://dx.doi.org/10.1016/j.ijsolstr.2015.12.033

Olson MD; Hill MR; Patel VI; Muránsky O; Sisneros T, 2015, 'Measured biaxial residual stress maps in a stainless steel weld', Journal of Nuclear Engineering and Radiation Science, 1, http://dx.doi.org/10.1115/1.4029927

Olson MD; Hill MR; Willis E; Peterson AG; Patel VI; Muránsky O, 2015, 'Assessment of weld residual stress measurement precision: Mock-up design and results for the contour method', Journal of Nuclear Engineering and Radiation Science, 1, http://dx.doi.org/10.1115/1.4029413

Muránsky O; Hamelin CJ; Patel VI; Luzin V; Braham C, 2015, 'The influence of constitutive material models on accumulated plastic strain in finite element weld analyses', International Journal of Solids and Structures, 69-70, pp. 518 - 530, http://dx.doi.org/10.1016/j.ijsolstr.2015.04.032

Hamelin CJ; Muránsky O; Smith MC; Holden TM; Luzin V; Bendeich PJ; Edwards L, 2014, 'Validation of a numerical model used to predict phase distribution and residual stress in ferritic steel weldments', Acta Materialia, 75, pp. 1 - 19, http://dx.doi.org/10.1016/j.actamat.2014.04.045

Muránsky O; Smith MC; Bendeich PJ; Hosseinzadeh F; Edwards L, 2014, 'Numerical analysis of retained residual stresses in C(T) specimen extracted from a multi-pass austenitic weld and their effect on crack growth', Engineering Fracture Mechanics, 126, pp. 40 - 53, http://dx.doi.org/10.1016/j.engfracmech.2014.04.008

Muránsky O; Holden TM; Kirstein O; James JA; Paradowska AM; Edwards L, 2013, 'Evaluation of residual stresses in electron-beam welded Zr2.5Nb0.9Hf Zircadyne flange mock-up of a reflector vessel beam tube flange', Journal of Nuclear Materials, 438, pp. 154 - 162, http://dx.doi.org/10.1016/j.jnucmat.2013.02.045

Muránsky O; Daymond MR; Bhattacharyya D; Zanellato O; Vogel SC; Edwards L, 2013, 'Load partitioning and evidence of deformation twinning in dual-phase fine-grained Zr-2.5%Nb alloy', Materials Science and Engineering: A, 564, pp. 548 - 558, http://dx.doi.org/10.1016/j.msea.2012.11.075

Bendeich PJ; Muránsky O; Hamelin CJ; Smith MC; Edwards L, 2012, 'Validated numerical analysis of residual stresses in safety relief valve (SRV) nozzle mock-ups: Influence of axial restraint on distortion and residual stress predictions', Computational Materials Science, 62, pp. 285 - 288, http://dx.doi.org/10.1016/j.commatsci.2012.05.042

Flores-Johnson EA; Muránsky O; Hamelin CJ; Bendeich PJ; Edwards L, 2012, 'Numerical analysis of the effect of weld-induced residual stress and plastic damage on the ballistic performance of welded steel plate', Computational Materials Science, 58, pp. 131 - 139, http://dx.doi.org/10.1016/j.commatsci.2012.02.009

Muránsky O; Smith MC; Bendeich PJ; Holden TM; Luzin V; Martins RV; Edwards L, 2012, 'Comprehensive numerical analysis of a three-pass bead-in-slot weld and its critical validation using neutron and synchrotron diffraction residual stress measurements', International Journal of Solids and Structures, 49, pp. 1045 - 1062, http://dx.doi.org/10.1016/j.ijsolstr.2011.07.006

Muránsky O; Hamelin CJ; Smith MC; Bendeich PJ; Edwards L, 2012, 'The effect of plasticity theory on predicted residual stress fields in numerical weld analyses', Computational Materials Science, 54, pp. 125 - 134, http://dx.doi.org/10.1016/j.commatsci.2011.10.026

Muránsky O; Smith MC; Bendeich PJ; Edwards L, 2011, 'Validated numerical analysis of residual stresses in Safety Relief Valve (SRV) nozzle mock-ups', Computational Materials Science, 50, pp. 2203 - 2215, http://dx.doi.org/10.1016/j.commatsci.2011.02.031

Muránsky O; Barnett MR; Luzin V; Vogel S, 2010, 'On the correlation between deformation twinning and Lüders-like deformation in an extruded Mg alloy: In situ neutron diffraction and EPSC.4 modelling', Materials Science and Engineering: A, 527, pp. 1383 - 1394, http://dx.doi.org/10.1016/j.msea.2009.10.018

Muránsky O; Barnett MR; Carr DG; Vogel SC; Oliver EC, 2010, 'Investigation of deformation twinning in a fine-grained and coarse-grained ZM20 Mg alloy: Combined in situ neutron diffraction and acoustic emission', Acta Materialia, 58, pp. 1503 - 1517, http://dx.doi.org/10.1016/j.actamat.2009.10.057

Muránsky O; Carr DG; Šittner P; Oliver EC, 2009, 'In situ neutron diffraction investigation of deformation twinning and pseudoelastic-like behaviour of extruded AZ31 magnesium alloy', International Journal of Plasticity, 25, pp. 1107 - 1127, http://dx.doi.org/10.1016/j.ijplas.2008.08.002

Muránsky O; Carr DG; Barnett MR; Oliver EC; Šittner P, 2008, 'Investigation of deformation mechanisms involved in the plasticity of AZ31 Mg alloy: In situ neutron diffraction and EPSC modelling', Materials Science and Engineering: A, 496, pp. 14 - 24, http://dx.doi.org/10.1016/j.msea.2008.07.031

Muránsky O; Šittner P; Zrník J; Oliver EC, 2008, 'In situ neutron diffraction investigation of the collaborative deformation-transformation mechanism in TRIP-assisted steels at room and elevated temperatures', Acta Materialia, 56, pp. 3367 - 3379, http://dx.doi.org/10.1016/j.actamat.2008.03.026

Zrnik J; Muransky O; Stejskal O; Lukáš P; Hornak P, 2008, 'Effect of processing conditions on structure development and mechanical response of Si-Mn 'TRIP' steel', Materials Science and Engineering: A, 483-484, pp. 71 - 75, http://dx.doi.org/10.1016/j.msea.2006.09.148

Jenčuš P; Polák J; Lukáš P; Muránsky O, 2006, 'In situ neutron diffraction study of the low cycle fatigue of the α-γ duplex stainless steel', Physica B: Condensed Matter, 385-386 I, pp. 597 - 599, http://dx.doi.org/10.1016/j.physb.2006.06.109

Muránsky O; Lukáš P; Zrník J; Šittner P, 2006, 'Neutron diffraction analysis of retained austenite stability in Mn-Si steel during plastic deformation', Physica B: Condensed Matter, 385-386 I, pp. 587 - 589, http://dx.doi.org/10.1016/j.physb.2006.05.367

Zrník J; Muránsky O; Lukáš P; Nový Z; Sittner P; Horňak P, 2006, 'Retained austenite stability investigation in TRIP steel using neutron diffraction', Materials Science and Engineering: A, 437, pp. 114 - 119, http://dx.doi.org/10.1016/j.msea.2006.04.067

Xu PG; Tomota Y; Lukáš P; Muránsky O; Adachi Y, 2006, 'Austenite-to-ferrite transformation in low alloy steels during thermomechanically controlled process studied by in situ neutron diffraction', Materials Science and Engineering: A, 435-436, pp. 46 - 53, http://dx.doi.org/10.1016/j.msea.2006.06.002

Zrnik J; Mamuzić I; Lukaš P; Muransky O; Jenčuš P; Novy Z, 2006, 'Design of thermo mechanical processing and transformation behaviour of bulk Si-Mn trip steel', Metalurgija, 45, pp. 85 - 91

Koo MS; Xu PG; Li JH; Tomota Y; Muransky O; Lukas P; Adachi Y, 2006, 'In situ neutron diffraction during thermo-mechanically controlled process in low alloy steels', Solid State Phenomena, 118, pp. 419 - 424, http://dx.doi.org/10.4028/www.scientific.net/SSP.118.419

Zrnik J; Strunz P; Vrchovinsky V; Muransky O; Novy Z; Wiedenmann A, 2004, 'Degradation of creep properties in a long-term thermally exposed nickel base superalloy', Materials Science and Engineering: A, 387-389, pp. 728 - 733, http://dx.doi.org/10.1016/j.msea.2004.02.100

Zrnik J; Strunz P; Vrchovinsky V; Muransky O; Hornak P; Wiedenmann A, 2004, 'Creep deformation and microstructural examination of a prior thermally exposed nickel base superalloy', Key Engineering Materials, 274-276, pp. 925 - 930, http://dx.doi.org/10.4028/www.scientific.net/kem.274-276.925

Conference Papers

Akrivos V; Smith MC; Muransky O; Ohms C; Youtsos A, 2020, 'A residual stress measurement and numerical analysis round robin on a three-pass slot nickel-base repair weld', in Procedia Manufacturing, pp. 779 - 786, http://dx.doi.org/10.1016/j.promfg.2020.10.109

Hamelin CJ; Muránsky O; Smith MC; Edwards L, 2017, 'A comparison of the constitutive response of austenitic and ferritic steels under welding processes', in Materials Science Forum, pp. 83 - 90, http://dx.doi.org/10.4028/www.scientific.net/MSF.905.83

Yang C; Muránsky O; Zhu H; Avdeev M; Huang H; Huai P; Zhou X, 2017, 'On development of NiMo-SiC alloys via powder metallurgy for the use in molten salt environment', in 9th Australasian Congress on Applied Mechanics, ACAM 2017

Muránsky O; Hamelin CJ; Tran M; Braham C; Smith MC, 2016, 'Assessment of welding-induced plasticity in austenitic steel weldments', in American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vancouver, Canada,, presented at ASME 2016 Pressure Vessels and Piping Conference, Vancouver, Canada,, 17 July 2016 - 21 July 2016, http://dx.doi.org/10.1115/PVP2016-63358

Law M; Bendeich PJ; Muránsky O; Payten WM; Hamelin CJ, 2016, 'Nuclear-related materials and technology research at ANSTO', in American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, http://dx.doi.org/10.1115/PVP2016-63686

Smith MC; Muransky O; Akrivos V; Angles J, 2016, 'The net task group 6 weld residual stress measurement and simulation round robin in alloy 600/82', in American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, http://dx.doi.org/10.1115/PVP2016-63941

Tran MN; Muránsky O; Hill MR; Olson MD, 2015, 'Numerical analysis of weld residual stress in a pressurizer surge nozzle full-scale mockup: The effect of hardening constitutive model and interpass temperature', in American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, http://dx.doi.org/10.1115/PVP201545744

Patel VI; Muránsky O; Hamelin CJ; Olson MD; Hill MR; Edwards L, 2014, 'A validated numerical model for residual stress predictions in an eight-pass-welded stainless steel plate', in Materials Science Forum, pp. 46 - 51, http://dx.doi.org/10.4028/www.scientific.net/MSF.777.46

Zrnik J; Muransky O; Sittner P, 2014, 'Deformation behaviour of TRIP steel monitored by in-situ neutron diffraction', in Advanced Materials Research, pp. 25 - 30, http://dx.doi.org/10.4028/www.scientific.net/AMR.939.25

Zrník J; Muránsky O; Sittner P, 2014, 'Effect of thermomechanical processing on structure development and mechanical properties of bulk trip steel', in METAL 2014 - 23rd International Conference on Metallurgy and Materials, Conference Proceedings, pp. 448 - 452

Patel VI; Muránsky O; Hamelin CJ; Olson MD; Hill MR; Edwards L, 2014, 'Finite element modelling of welded austenitic stainless steel plate with 8-passes', in American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, http://dx.doi.org/10.1115/PVP2014-28163

Zrník J; Muránsky O; Šittner P, 2014, 'Impact of microstructure modification on deformation behaviour of bulk TRIP steel', in Materials Science Forum, pp. 99 - 103, http://dx.doi.org/10.4028/www.scientific.net/MSF.782.99

Smith MC; Muransky O; Smith D; Do SC; Bouchard PJ; Mathew J, 2014, 'Modelling and measuring residual stresses in pipe girth welds - Lessons from the style framework 7 project', in American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, http://dx.doi.org/10.1115/PVP2014-29005

Hamelin CJ; Muránsky O; Edwards L, 2014, 'The influence of austenite grain size during welding simulations of ferritic steels', in Advanced Materials Research, pp. 512 - 517, http://dx.doi.org/10.4028/www.scientific.net/AMR.996.512

Muránsky O; Hamelin CJ; Smith MC; Bendeich PJ; Edwards L, 2014, 'The role of plasticity theory on the predicted residual stress field of weld structures', in Materials Science Forum, pp. 65 - 71, http://dx.doi.org/10.4028/www.scientific.net/MSF.772.65

Dennis RJ; Kulka R; Muransky O; Smith MC, 2013, 'Influence of phase transformations on residual stresses in welded structures', in American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, http://dx.doi.org/10.1115/PVP2013-97684

Aird C; Smith M; Kapadia P; Venkata KA; Muransky O, 2013, 'Round robin prediction of residual stresses in the edge-welded beam R6 validation benchmark problem', in American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, http://dx.doi.org/10.1115/PVP2013-98039

Back to profile page