Select Publications
By Dr Raju Raju
Book Chapters
2016, 'Fiber-Optic Structural Health Monitoring Systems for Marine Composite Structures', in Structural Health Monitoring of Composite Structures Using Fiber Optic Methods, CRC Press, pp. 415 - 479
,2012, 'AE Failure Characterization of Advanced Composites using Piezo-Electric Sensors and Fibre Optic Sensors', in Burnett JK (ed.), Theory and Uses of Acoustic Emissions, Nova Science Publishers, New York, pp. 215 - 280, https://www.novapublishers.com/catalog/product_info.php?products_id=18319
,Edited Books
Prusty G; Rajan G, (ed.), 2016, Structural Health Monitoring of Composite Structures Using Fiber Optic Methods, CRC Press, UK, https://www.crcpress.com/Structural-Health-Monitoring-of-Composite-Structures-Using-Fiber-Optic/Rajan-Prusty/p/book/9781498733175
Journal articles
2024, 'Comparative analysis of self-cure and dual cure-dental composites on their physico-mechanical behaviour', Australian Dental Journal, 69, pp. 124 - 138, http://dx.doi.org/10.1111/adj.13004
,2023, 'Design and tribological performance of short S-Glass fibre reinforced biocomposites on the influence of fibre length and concentration', Scientific Reports, 13, http://dx.doi.org/10.1038/s41598-023-28645-6
,2023, 'Effect of silane coupling agent and concentration on fracture toughness and water sorption behaviour of fibre-reinforced dental composites', Dental Materials, 39, pp. 362 - 371, http://dx.doi.org/10.1016/j.dental.2023.03.002
,2022, 'Influence of silane coupling agent on the mechanical performance of flowable fibre-reinforced dental composites', Dental Materials, 38, pp. 1173 - 1183, http://dx.doi.org/10.1016/j.dental.2022.06.002
,2022, 'Effect of Printing Layer Thickness and Postprinting Conditions on the Flexural Strength and Hardness of a 3D-Printed Resin', BioMed Research International, 2022, http://dx.doi.org/10.1155/2022/8353137
,2021, 'Dimensional stability of short fibre reinforced flowable dental composites', Scientific Reports, 11, http://dx.doi.org/10.1038/s41598-021-83947-x
,2021, 'Evaluation of depth-wise post-gel polymerisation shrinkage behaviour of flowable dental composites', Journal of the Mechanical Behavior of Biomedical Materials, 124, http://dx.doi.org/10.1016/j.jmbbm.2021.104860
,2021, 'Evaluation of rheological behaviour of flowable dental composites reinforced with low aspect ratio micro-sized glass fibres', Dental Materials, 37, pp. 131 - 142, http://dx.doi.org/10.1016/j.dental.2020.10.023
,2020, '3D printed nanocomposites using polymer grafted graphene oxide prepared by multicomponent Passerini reaction', Polymer Chemistry, 11, pp. 7253 - 7263, http://dx.doi.org/10.1039/d0py01286f
,2020, 'Acoustic emission and finite element study on the influence of cusp angles on zirconia dental crowns', Dental Materials, 36, pp. 1524 - 1535, http://dx.doi.org/10.1016/j.dental.2020.09.007
,2020, 'Physical and mechanical characterisation of flowable dental composites reinforced with short aspect ratio micro-sized S-Glass fibres', Materials Science and Engineering C, 111, pp. 110771, http://dx.doi.org/10.1016/j.msec.2020.110771
,2019, 'Polymerisation Shrinkage Profiling of Dental Composites using Optical Fibre Sensing and their Correlation with Degree of Conversion and Curing Rate', Scientific Reports, 9, pp. 3162, http://dx.doi.org/10.1038/s41598-019-40162-z
,2019, 'Selective Atomic-Level Etching on Short S-Glass Fibres to Control Interfacial Properties for Restorative Dental Composites', Scientific Reports, 9, pp. 3851, http://dx.doi.org/10.1038/s41598-019-40524-7
,2019, 'Influence of Surface Treatment on the Interfacial and Mechanical Properties of Short S-Glass Fiber-Reinforced Dental Composites', ACS Applied Materials and Interfaces, 11, pp. 32328 - 32338, http://dx.doi.org/10.1021/acsami.9b01857
,2014, 'Numerical Failure Investigation for feasibility of Advanced Composite Automotive Engine Mounts subjected to Dynamic Loads', SAE International Journal of Engines, 28, pp. 1 - 5, http://dx.doi.org/10.4271/2014-28-0028
,2013, 'Failure monitoring of E-glass/vinylester composites using fiber grating acoustic sensor', Photonic Sensors, 3, pp. 184 - 192, http://dx.doi.org/10.1007/s13320-012-0076-1
,2013, 'Structural Health Monitoring of advanced composites using Acoustic Emission and Strain gradients with Fibre Optic Sensors', International Journal of Science Research, 1, pp. 531 - 538
,2012, 'Acoustic emission techniques for failure characterisation in composite top-hat stiffeners', Journal of Reinforced Plastics and Composites, 31, pp. 495 - 516, http://jrp.sagepub.com/content/31/7/495
,2010, 'Delamination charaterisation of curved composites using acoustic emission and fibre bragg gratings', International Maritime Conference 2010, Pacific 2010, pp. 252 - 266
,2010, 'Failure characterisation of l-bend curved composite laminates', Trans RINA, Part B1,International Journal of Small Craft Technology, 152, pp. B91 - B104, http://content.yudu.com/A1rpdw/IJSCTB22010/resources/66.htm
,2010, 'Failure Characterisation of L-Bend curved composite laminates', Trans RINA, Part B1,International Journal of Small Craft Technology, 152, pp. B93 - B105, http://dx.doi.org/10.3940/rina.ijsct.2010.b2.107
,2010, 'Top hat stiffeners: A study on keel failures', Ocean Engineering, 37, pp. 1180 - 1192, http://www.sciencedirect.com/science/article/pii/S0029801810001319
,2010, 'Top hat stiffeners: A study on keel structures', Ocean Engineering, 37, pp. 1180 - 1192, http://dx.doi.org/10.1016/j.oceaneng.2010.05.008
,Conference Papers
2020, 'AC conductivity and dielectric behaviour of NaNbO
2017, 'In-vitro investigation of S-2 glass fibre aspect ratio on flexure strength, hardness and wear performance of fibre reinforced flowable dental composites', in 9th Australasian Congress on Applied Mechanics (ACAM9), Engineers Australia, UNSW, Sydney, Australia, presented at 9TH Australasian Congress on Applied Mechanics (ACAM9), UNSW, Sydney, Australia, 27 November 2017 - 29 November 2017, http://dx.doi.org/10.26190/unsworks/26637
,2017, 'Investigation on the surface treatment of short S2-glass fibre for dental composites', Engineers Australia, Sydney, pp. 114 - 120, presented at 9th Australasian Congress on Applied Mechanics (ACAM9), Sydney, 27 November 2017 - 29 November 2017, https://search.informit.com.au/documentSummary;dn=390297606980978;res=IELENG
,2017, 'Failure analysis of dental restorative composites in class II (MOD) cavity using FEM', in 9th Australasian Congress on Applied Mechanics, ACAM 2017
,2015, 'Structural Health Monitoring and Online Manufacturing Monitoring of Composite Structures Using Fibre Optic Methods', Indian Institute of Technology Guwahati, presented at 12th international conference on vibration problems, Indian Institute of Technology Guwahati, 13 December 2015 - 17 December 2015
,2014, 'Experimental Investigation on the Embedding of Optical Fibre Sensors for Curved Composite Structures', in Proceedings of International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2014), International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2014), IIT Kharagpur, India, presented at International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2014), IIT Kharagpur, India, 29 December 2014 - 31 December 2014
,2014, 'Damage Analysis of Curved Composite Structures using Interface Elements', in Iyer NR; Palani GS; Kant T (eds.), Proceedings of 5th International Congress on Computational Mechanics and Simulation (ICCMS-2014), Research Publishing, Chennai, India, pp. 385 - 388, presented at International Congress on Computational Mechanics and Simulation, Chennai, India, 10 December 2014 - 13 December 2014
,2014, 'Numerical Analysis of Metal-Composite Hybrid joint subjected to Static loading', in Proceedings of International Conference on Lightweighting Technology (LWT-2014), International Conference on Lightweighting Technology (LWT-2014), Chennai, India, presented at International Conference on Lightweighting Technology (LWT-2014), Chennai, India, 04 December 2014 - 06 December 2014
,2014, 'Structural Health Monitoring of Composites for Aircraft Structures', in Proceedings of International conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME-2014), International conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME-2014), Kapurthala, Punjab, India, presented at International conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME-2014), Kapurthala, Punjab, India, 16 October 2014 - 18 October 2014
,2014, 'On the effect of Post-curing Temperature of Vinylester/E-Glass composites with Wet hand layup and VARTM: An Experimental Investigation for Material Characterisation', in Thomas S; Sebastian B; Shukkur S (eds.), Proceedings of Third International Conference on Polymer Processing and Characterisations (ICPPC 2014), International and Inter University Centre for Nanoscience and nanotechnology (IIUCNN), Mahatma Gandhi University, Priyadarshini Hills, PO Athirampuzha, Kottayam, Kerala, India- 686560, Kottayam, India, pp. 32 - 33, presented at Third International Conference on Polymer Processing and Characterisations (ICPPC 2014), Kottayam, India, 11 October 2014 - 13 October 2014
,2014, 'Damage analysis of structural composites with out-of-plane loading using Fracture Mechanics criteria in MSC Marc with experimental validation', in Proceedings of MSC User Conference 2014, MSC User Conference 2014, Chennai, India, presented at MSC User Conference 2014, Chennai, India, 12 September 2014 - 12 September 2014
,2014, 'Delamination Damage Analysis of a curved composite subjected to compressive load using cohesive zone modelling', in Proceedings of First World Conference on Fracture and Damage Mechanics: Metals, Glass, Ceramics, Semi-conductors, Polymers, Alloys, Composites, Nano-composites, Gels, and Adhesives (FRACTURE 2014), First World Conference on Fracture and Damage Mechanics: Metals, Glass, Ceramics, Semi-conductors, Polymers, Alloys, Composites, Nano-composites, Gels, and Adhesives (FRACTURE 2014), Kottayam, India, presented at First World Conference on Fracture and Damage Mechanics: Metals, Glass, Ceramics, Semi-conductors, Polymers, Alloys, Composites, Nano-composites, Gels, and Adhesives (FRACTURE 2014), Kottayam, India, 09 August 2014 - 11 August 2014
,2014, 'Fatigue life enhancement of Aircraft structural panels due to effect of residual stress around cold worked holes', in Proceedings of First World Conference on Fracture and Damage Mechanics: Metals, Glass, Ceramics, Semi-conductors, Polymers, Alloys, Composites, Nano-composites, Gels, and Adhesives (FRACTURE 2014), First World Conference on Fracture and Damage Mechanics: Metals, Glass, Ceramics, Semi-conductors, Polymers, Alloys, Composites, Nano-composites, Gels, and Adhesives (FRACTURE 2014), Kottayam, India, presented at First World Conference on Fracture and Damage Mechanics: Metals, Glass, Ceramics, Semi-conductors, Polymers, Alloys, Composites, Nano-composites, Gels, and Adhesives (FRACTURE 2014), Kottayam, India, 09 August 2014 - 11 August 2014
,2014, 'Numerical Failure Investigation for feasibility of Advanced Composite Automotive Engine Mounts subjected to Dynamic Loads', in Proceedings of International Conference on Automotive Materials & Manufacturing 2014 (AM&M), International Conference on Automotive Materials & Manufacturing 2014 (AM&M), Pune, India, presented at International Conference on Automotive Materials & Manufacturing 2014 (AM&M), Pune, India, 28 April 2014 - 30 April 2014
,2013, 'Cost-Effective Structural health monitoring of composites using smart sensors', in Proceedings of International Exhibition and Conference on Composites and Advanced Materials Industry, International Exhibition and Conference on Composites and Advanced Materials Industry, New Delhi, India, presented at International Exhibition and Conference on Composites and Advanced Materials Industry, New Delhi, India, 24 October 2013 - 26 October 2013
,2013, 'An Affordable composites lab to bridge the gap between Industry and Academia', in Proceedings of International Conference on Convergence of Science, Engineering and Management (ICCSEM-2013), International Conference on Convergence of Science, Engineering and Management (ICCSEM-2013), Bangalore, India, presented at International Conference on Convergence of Science, Engineering and Management (ICCSEM-2013), Bangalore, India, 26 September 2013 - 27 September 2013
,2013, 'Bridging the gap between Academia and Industry for Aeronautical Engineering', in Proceedings of International Conference on Convergence of Science, Engineering and Management (ICCSEM-2013), International Conference on Convergence of Science, Engineering and Management (ICCSEM-2013), Bangalore, India, presented at International Conference on Convergence of Science, Engineering and Management (ICCSEM-2013), Bangalore, India, 26 September 2013 - 27 September 2013
,2013, 'Fatigue and Progressive Failure Analysis of Composite Curved Aircraft structural components using Interface elements with MSC MARC', in Proceedings of MSC Software User Conference 2013, MSC Software User Conference, Bangalore, India, presented at MSC Software User Conference, Bangalore, India, 05 September 2013 - 06 September 2013
,2013, 'Experimental and numerical progressive failure analysis of L-bend curved composites using acoustic emission and embedded fibre optic sensors', in Proceedings of 4th International Conference on Recent Advances in Composite Materials (ICRACM-2013),, Goa, India, presented at 4th International Conference on Recent Advances in Composite Materials (ICRACM-2013), Goa, India, 18 February 2013 - 21 February 2013
,2012, 'Validation of FBG Acoustic Emission Sensors with Piezoelectric Sensors on Structural Composites', in Proceedings of International Conference on Recent Advances in Materials Science (RAMS 2012), International Conference on Recent Advances in Materials Science, Bangalore, India, presented at International Conference on Recent Advances in Materials Science, Bangalore, India, 06 November 2012 - 08 November 2012
,2012, 'Delamination in Composites: Progressive failure analysis using cohesive damage model with MSC Marc', in Proceedings of MSC Software User Conference, MSC Software User Conference, Bangalore, India, presented at MSC Software User Conference, Bangalore, India, 13 September 2012 - 14 September 2012
,2012, 'Failure monitoring in composite structures using embedded FBG strain sensors', in Optics InfoBase Conference Papers
,2012, 'Application of fiber grating-based acoustic sensor in progressive failure testing of E-glass/vinylester curve composites', in Proceedings of SPIE - The International Society for Optical Engineering, SPIE, Bellingham, WA, United States, pp. 835110-1 - 835110-8, presented at 3rd Asia Pacific Optical Sensors Conference, 31 January - 3 February, 2012, http://spiedigitallibrary.org/proceedings/resource/2/psisdg/8351/1/83511O_1?isAuthorized=no
,2012, 'Progressive failure monitoring of E-glass/vinylester curve composites using embedded FBG sensors', in Proceedings of SPIE - The International Society for Optical Engineering, SPIE, Bellingham, WA, United States, pp. 835138-1 - 835138-8, presented at 3rd Asia Pacific Optical Sensors Conference, 31 January - 3 February, 2012, http://spiedigitallibrary.org/proceedings/resource/2/psisdg/8351/1/835138_1?isAuthorized=no
,