Select Publications

Journal articles

Raju ; Loy CW; Cho K; Farrar P; Prusty BG, 2023, 'Design and tribological performance of short S-Glass fibre reinforced biocomposites on the influence of fibre length and concentration', Scientific Reports, 13, http://dx.doi.org/10.1038/s41598-023-28645-6

Thadathil Varghese J; Cho K; Raju ; Farrar P; Prentice L; Prusty BG, 2023, 'Effect of silane coupling agent and concentration on fracture toughness and water sorption behaviour of fibre-reinforced dental composites', Dental Materials, 39, pp. 362 - 371, http://dx.doi.org/10.1016/j.dental.2023.03.002

Thadathil Varghese J; Raju R; Farrar P; Prentice L; Prusty BG, 2023, 'Comparative analysis of self-cure and dual cure-dental composites on their physico-mechanical behaviour', Australian Dental Journal, http://dx.doi.org/10.1111/adj.13004

Thadathil Varghese J; Cho K; Raju ; Farrar P; Prentice L; Prusty BG, 2022, 'Influence of silane coupling agent on the mechanical performance of flowable fibre-reinforced dental composites', Dental Materials, 38, pp. 1173 - 1183, http://dx.doi.org/10.1016/j.dental.2022.06.002

Alshamrani AA; Raju R; Ellakwa A, 2022, 'Effect of Printing Layer Thickness and Postprinting Conditions on the Flexural Strength and Hardness of a 3D-Printed Resin', BioMed Research International, 2022, http://dx.doi.org/10.1155/2022/8353137

Raju R; Rajan G; Farrar P; Prusty BG, 2021, 'Dimensional stability of short fibre reinforced flowable dental composites', Scientific Reports, 11, http://dx.doi.org/10.1038/s41598-021-83947-x

Behl S; Rajan G; Raju ; Farrar P; Prentice L; Prusty BG, 2021, 'Evaluation of depth-wise post-gel polymerisation shrinkage behaviour of flowable dental composites', Journal of the Mechanical Behavior of Biomedical Materials, 124, http://dx.doi.org/10.1016/j.jmbbm.2021.104860

Behl S; Farahani AD; Raju ; Rajan G; Ellakwa A; Farrar P; Thordarson P; Prusty BG, 2021, 'Evaluation of rheological behaviour of flowable dental composites reinforced with low aspect ratio micro-sized glass fibres', Dental Materials, 37, pp. 131 - 142, http://dx.doi.org/10.1016/j.dental.2020.10.023

Wang G; Raju R; Cho K; Wong S; Prusty BG; Stenzel MH, 2020, '3D printed nanocomposites using polymer grafted graphene oxide prepared by multicomponent Passerini reaction', Polymer Chemistry, 11, pp. 7253 - 7263, http://dx.doi.org/10.1039/d0py01286f

Ellakwa A; Raju R; Sheng C; Rajan G; Prusty BG, 2020, 'Acoustic emission and finite element study on the influence of cusp angles on zirconia dental crowns', Dental Materials, 36, pp. 1524 - 1535, http://dx.doi.org/10.1016/j.dental.2020.09.007

Behl S; Raju ; Rajan G; Ellakwa A; Farrar P; Prusty BG, 2020, 'Physical and mechanical characterisation of flowable dental composites reinforced with short aspect ratio micro-sized S-Glass fibres', Materials Science and Engineering C, 111, http://dx.doi.org/10.1016/j.msec.2020.110771

Rajan G; Raju R; Jinachandran S; Farrar P; Xi J; Prusty BG, 2019, 'Polymerisation Shrinkage Profiling of Dental Composites using Optical Fibre Sensing and their Correlation with Degree of Conversion and Curing Rate', Scientific Reports, 9, http://dx.doi.org/10.1038/s41598-019-40162-z

Cho K; Wang G; Raju ; Fang J; Rajan G; Stenzel MH; Farrar P; Prusty BG, 2019, 'Selective Atomic-Level Etching on Short S-Glass Fibres to Control Interfacial Properties for Restorative Dental Composites', Scientific Reports, 9, http://dx.doi.org/10.1038/s41598-019-40524-7

Cho K; Wang G; Raju R; Rajan G; Fang J; Stenzel MH; Farrar P; Gangadhara Prusty B, 2019, 'Influence of Surface Treatment on the Interfacial and Mechanical Properties of Short S-Glass Fiber-Reinforced Dental Composites', ACS Applied Materials and Interfaces, 11, pp. 32328 - 32338, http://dx.doi.org/10.1021/acsami.9b01857

R R; Jaiswal S; Singh A; Kashinakunti G, 2014, 'Numerical Failure Investigation for feasibility of Advanced Composite Automotive Engine Mounts subjected to Dynamic Loads', SAE International Journal of Engines, 28, pp. 1 - 5, http://dx.doi.org/10.4271/2014-28-0028

Azmi AI; Raju ; Peng GD, 2013, 'Failure monitoring of E-glass/vinylester composites using fiber grating acoustic sensor', Photonic Sensors, 3, pp. 184 - 192, http://dx.doi.org/10.1007/s13320-012-0076-1

Raju R; Azmi , 2013, 'Structural Health Monitoring of advanced composites using Acoustic Emission and Strain gradients with Fibre Optic Sensors', International Journal of Science Research, 1, pp. 531 - 538

Raju ; Azmi ; Prusty BG, 2012, 'Acoustic emission techniques for failure characterisation in composite top-hat stiffeners', Journal of Reinforced Plastics and Composites, 31, pp. 495 - 516, http://jrp.sagepub.com/content/31/7/495

Raju ; Prusty BG; Kelly DW; Lyons D; Peng GD, 2010, 'Delamination charaterisation of curved composites using acoustic emission and fibre bragg gratings', International Maritime Conference 2010, Pacific 2010, pp. 252 - 266

Raju ; Prusty BG; Kelly DW; Peng G, 2010, 'Failure characterisation of l-bend curved composite laminates', Trans RINA, Part B1,International Journal of Small Craft Technology, 152, pp. B91 - B104, http://content.yudu.com/A1rpdw/IJSCTB22010/resources/66.htm

Raju R; Prusty BG; Kelly DW; Lyons D; Peng G, 2010, 'Failure Characterisation of L-Bend curved composite laminates', Trans RINA, Part B1,International Journal of Small Craft Technology, 152, pp. B93 - B105, http://dx.doi.org/10.3940/rina.ijsct.2010.b2.107

Raju ; Prusty BG; Kelly DW; Lyons D; Peng G, 2010, 'Top hat stiffeners: A study on keel failures', Ocean Engineering, 37, pp. 1180 - 1192, http://www.sciencedirect.com/science/article/pii/S0029801810001319

Raju R; Prusty BG; Kelly DW; Lyons D; Peng G, 2010, 'Top hat stiffeners: A study on keel structures', Ocean Engineering, 37, pp. 1180 - 1192, http://dx.doi.org/10.1016/j.oceaneng.2010.05.008


Back to profile page