By Emeritus Professor Bob Randall

Journal articles

Rémond D; Antoni J; Randall RB, 2014, 'Instantaneous Angular Speed (IAS) processing and related angular applications', Mechanical Systems and Signal Processing, 45, pp. 24 - 27, http://dx.doi.org/10.1016/j.ymssp.2013.10.015

Rémond D; Antoni J; Randall RB, 2014, 'Editorial for the special issue on Instantaneous Angular Speed (IAS) processing and angular applications', Mechanical Systems and Signal Processing, 44, pp. 1 - 4, http://dx.doi.org/10.1016/j.ymssp.2013.11.006

Coats MD; Randall RB, 2014, 'Single and multi-stage phase demodulation based order-tracking', Mechanical Systems and Signal Processing, 44, pp. 86 - 117, http://dx.doi.org/10.1016/j.ymssp.2013.09.016

Sawalhi N; Randall RB, 2014, 'Gear parameter identification in a wind turbine gearbox using vibration signals', Mechanical Systems and Signal Processing, 42, pp. 368 - 376, http://dx.doi.org/10.1016/j.ymssp.2013.08.017

Sawalhi N; Randall RB; Forrester D, 2014, 'Separation and enhancement of gear and bearing signals for the diagnosis of wind turbine transmission systems', Wind Energy, 17, pp. 729 - 743, http://dx.doi.org/10.1002/we.1671

Chen J; Randall R; Feng N; Peeters B; Van Der Auweraer H, 2013, 'Automated diagnosis system for mechanical faults in IC engines', 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2013, CM 2013 and MFPT 2013, 2, pp. 892 - 903

Borghesani P; Pennacchi P; Randall RB; Sawalhi N; Ricci R, 2013, 'Application of cepstrum pre-whitening for the diagnosis of bearing faults under variable speed conditions', Mechanical Systems and Signal Processing, 36, pp. 370 - 384, http://dx.doi.org/10.1016/j.ymssp.2012.11.001

Forbes G; Randall RB, 2013, 'Estimation of Turbine Blade Natural Frequencies from Casing Pressure and Vibration Measurements', Mechanical Systems and Signal Processing, 36, pp. 549 - 561, http://dx.doi.org/10.1016/j.ymssp.2012.11.006

Coats MD; Randall RB, 2012, 'Order-Tracking with and without a tacho signal for gear fault diagnostics', Australian Acoustical Society Conference 2012, Acoustics 2012: Acoustics, Development, and the Environment, pp. 447 - 454

Deshpande L; Randall RB; Sawalhi N, 2012, 'Improved simulation of bearing faults using a Finite Element Model reduction technique', 9th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2012, CM 2012 and MFPT 2012, 2, pp. 816 - 826

Chen J; Randall RB; Peeters B; Desmet W; Van Der Auweraer HD, 2012, 'Artificial neural network based fault diagnosis of IC engines', Key Engineering Materials, 518, pp. 47 - 56, http://dx.doi.org/10.4028/www.scientific.net/KEM.518.47

Chen J; Randall RB; Peeters B; Van Der Auweraer HD; Desmet W, 2012, 'Automated misfire diagnosis in engines using torsional vibration and block rotation', Journal of Physics: Conference series, 364, pp. 1 - 12, http://dx.doi.org/10.1088/1742-6596/364/1/012020

Alshroof O; Forbes GL; Sawalhi N; Randall RB; Yeoh GH, 2012, 'Computational Fluid Dynamic Analysis of a Vibrating Turbine Blade', International Journal of Rotating Machinery, 2012, pp. 1 - 15, http://www.hindawi.com/journals/ijrm/2012/246031/

Deshpande L; Sawalhi N; Randall RB, 2012, 'Gearbox bearing fault simulation using a finite element model reduction technique.', Journal of Physics: Conference series, 364, pp. 1 - 12, http://dx.doi.org/10.1088/1742-6596/364/1/012082

Borghesani P; Pennacchi P; Randall RB; Ricci R, 2012, 'Order tracking for discrete-random separation in variable speed conditions', Mechanical Systems and Signal Processing, 30, pp. 1 - 22, http://dx.doi.org/10.1016/j.ymssp.2012.01.015

Deshpande L; Sawalhi N; Randall RB, 2011, 'Gearbox fault simulation using finite element model reduction technique', Australian Acoustical SocietyConference 2011, Acoustics 2011: Breaking New Ground, pp. 322 - 328

Randall RB; Sawalhi N; Coats M, 2011, 'A comparison of methods for separation of deterministic and random signals', The International Journal of Condition Monitoring, 1, pp. 11 - 19

Randall RB; Sawalhi N, 2011, 'A new method for separating discrete components from a signal', Sound and Vibration, 45, pp. 6 - 9

Urbanek J; Barszcz T; Sawalhi N; Randall RB, 2011, 'Comparison of amplitude-based and phase-based methods for speed tracking in application to wind turbines', Metrology and Measuring Systems, 18, pp. 295 - 304, http://www.metrology.pg.gda.pl/full/2011/M&MS_2011_295.pdf

Forbes GL; Alshroof O; Randall RB, 2011, 'Fluid-structure interaction study of gas turbine blade vibrations', Australian Journal of Mechanical Engineering, 8, pp. 143 - 150, http://search.informit.com.au/documentSummary;dn=506383555307988;res=IELENG

Deshpande L; Sawalhi N; Randall RB, 2011, 'Improved gearbox simulations for diagnostic and prognostics purposes using finite element model reduction techniques', Australian Journal of Mechanical Engineering, 8, pp. 91 - 101, http://search.informit.com.au/documentSummary;dn=505917731026532;res=IELENG

Randall RB; Antoni J, 2011, 'Rolling element bearing diagnostics-A tutorial', Mechanical Systems and Signal Processing, 25, pp. 485 - 520, http://dx.doi.org/10.1016/j.ymssp.2010.07.017

Sawalhi N; Randall RB, 2011, 'Vibration response of spalled rolling element bearings: Observations, simulations and signal processing techniques to track the spall size', Mechanical Systems and Signal Processing, 25, pp. 846 - 870, http://dx.doi.org/10.1016/j.ymssp.2010.09.009

Randall RB, 2010, 'Cepstrum analysis for machine diagnostics and operational modal analysis - A tutorial', Technical Program for the MFPT 2010 Conference - Transition: From R and D to Product

Sawalhi N; Randall RB, 2010, 'Simulation of the vibration generated by entry and exit to/from a spall in a rolling element bearing', 20th International Congress on Acoustics 2010, ICA 2010 - Incorporating Proceedings of the 2010 Annual Conference of the Australian Acoustical Society, 2, pp. 1278 - 1284

Sawalhi N; Randall RB, 2010, 'Improved simulations for fault size estimation in rolling element bearings', 7th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2010, CM 2010/MFPT 2010, 1, pp. 656 - 667

Coats MD; Randall RB, 2010, 'Single record order-tracking', 7th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2010, CM 2010/MFPT 2010, 1, pp. 47 - 58

Desbazeille M; Randall RB; Guillet F; El Badaoui M; Hoisnard C, 2010, 'Model-based diagnosis of large diesel engines based on angular speed variations of the crankshaft', Mechanical Systems and Signal Processing, 24, pp. 1529 - 1541, http://dx.doi.org/10.1016/j.ymssp.2009.12.004

Liu X; Cardoso J-F; Randall RB, 2010, 'Very fast blind source separation by signal to noise ratio based stopping threshold for the SHIBBS/SJAD algorithm', Mechanical Systems and Signal Processing, 24, pp. 2096 - 2103, http://dx.doi.org/10.1016/j.ymssp.2010.03.009

Vass J; Randall RB; Kara S; Kaebernick H, 2010, 'Vibration-based approach to lifetime prediction of electric motors for reuse', International Journal of Sustainable Manufacturing, 2, pp. 2 - 29, http://dx.doi.org/10.1504/IJSM.2010.031618

Forbes GL; Randall RB, 2009, 'Gas turbine casing vibrations under blade pressure excitation', Failure Prevention: Implementation, Success Stories and Lessons Learned - Proceedings of the 2009 Conference of the Society for Machinery Failure Prevention Technology

Randall RB, 2009, 'New signal processing techniques for advanced machine diagnostics and prognostics', Failure Prevention: Implementation, Success Stories and Lessons Learned - Proceedings of the 2009 Conference of the Society for Machinery Failure Prevention Technology

Randall RB, 2009, 'Rolling element bearing diagnostics - A tutorial', Failure Prevention: Implementation, Success Stories and Lessons Learned - Proceedings of the 2009 Conference of the Society for Machinery Failure Prevention Technology

Randall RB, 2009, 'The application of fault simulation to machine diagnostics and prognostics', 16th International Congress on Sound and Vibration 2009, ICSV 2009, 8, pp. 5042 - 5055

Randall RB, 2009, 'The present state and future developments in machine diagnostics and prognostics', 16th International Congress on Sound and Vibration 2009, ICSV 2009, 7, pp. 4101 - 4108

Yokohama H; Randall RB, 2009, 'Investigation of road surface roughness effect on tread rubber friction with FEA', SAE Technical Papers, http://dx.doi.org/10.4271/2009-01-0067

Barszcz T; Randall RB, 2009, 'Application of spectral kurtosis for detection of a tooth crack in the planetary gear of a wind turbine', Mechanical Systems and Signal Processing, 23, pp. 1352 - 1365

Endo H; Randall RB; Gosselin C, 2009, 'Differential diagnosis of spall vs. cracks in the gear tooth fillet region: Experimental validation', Mechanical Systems and Signal Processing, 23, pp. 636 - 651

Zhang Y; Randall RB, 2009, 'Rolling element bearing fault diagnosis based on the combination of genetic algorithms and fast kurtogram', Mechanical Systems and Signal Processing, 23, pp. 1509 - 1517, http://dx.doi.org/10.1016/j.ymssp.2009.02.003

Randall RB, 2009, 'The Application of Fault Simulation to Machine Diagnostics and Prognostics', International Journal of Acoustics and Vibration, 14, pp. 81 - 89

Hanson DJ; Winton M; Randall RB; Ford RA; Thompson DJ; Waters T; Antoni JE, 2008, 'An in-service dynamic model of a diesel railcar from operational modal analysis and finite-element model updating', Proceedings of the Institution of Mechanical Engineers Part F - Journal of Rail and Rapid Transit, 222, pp. 313 - 320

Vass J; Smid R; Randall RB; Sovka P; Cristalli C; Torcianti B, 2008, 'Avoidance of speckle noise in laser vibrometry by the use of kurtosis ratio: Application to mechanical fault diagnostics', Mechanical Systems and Signal Processing, 22, pp. 647 - 671, http://dx.doi.org/10.1016/j.ymssp.2007.08.008

Liu X; Randall RB; Antoni JE, 2008, 'Blind separation of internal combustion engine vibration signals by a deflation method', Mechanical Systems and Signal Processing, 22, pp. 1082 - 1091, http://dx.doi.org/10.1016/j.ymssp.2007.11.011

Sawalhi N; Randall RB, 2008, 'Helicopter gearbox bearing blind fault identification using a range of analysis techniques', Australian Journal of Mechanical Engineering, 5, pp. 157 - 168

Hanson D; Randall RB; Brown G; Emslie R, 2008, 'Locating leaks in underground water pipes using the complex cepstrum', Australian Journal of Mechanical Engineering, 6, pp. 107 - 112

Forbes GL; Randall RB, 2008, 'Resonance phenomena of an elastic ring under a moving load', Journal of Sound and Vibration, 318, pp. 991 - 1004

Sawalhi N; Randall RB, 2008, 'Simulating gear and bearing interactions in the presence of faults. Part I. The combined gear bearing dynamic model and the simulation of localised bearing faults', Mechanical Systems and Signal Processing, 22, pp. 1924 - 1951, http://dx.doi.org/10.1016/j.ymssp.2007.12.001

Sawalhi N; Randall RB, 2008, 'Simulating gear and bearing interactions in the presence of faults. Part II: Simulation of the vibrations produced by extended bearing faults', Mechanical Systems and Signal Processing, 22, pp. 1952 - 1966, http://dx.doi.org/10.1016/j.ymssp.2007.12.002

Yokohama H; Hall SD; Randall RB, 2007, 'Experimental and theoretical studies of rubber properties; The application to tyre tread rubber', SAE Technical Papers, http://dx.doi.org/10.4271/2007-01-1527

Antoni J; Hanson DJ; Randall RB, 2007, 'Combining cyclostationarity and the frequency domain subspace technique for operational modal analysis.', Key Engineering Materials, 347, pp. 473 - 478

Back to profile page