ORCID as entered in ROS
https://orcid.org/0000-0003-4042-1566
Select Publications
Journal articles
, 2008, 'Simulating gear and bearing interactions in the presence of faults. Part I. The combined gear bearing dynamic model and the simulation of localised bearing faults', Mechanical Systems and Signal Processing, 22, pp. 1924 - 1951, http://dx.doi.org/10.1016/j.ymssp.2007.12.001
, 2008, 'Simulating gear and bearing interactions in the presence of faults. Part II: Simulation of the vibrations produced by extended bearing faults', Mechanical Systems and Signal Processing, 22, pp. 1952 - 1966, http://dx.doi.org/10.1016/j.ymssp.2007.12.002
, 2007, 'Experimental and theoretical studies of rubber properties; The application to tyre tread rubber', SAE Technical Papers, http://dx.doi.org/10.4271/2007-01-1527
, 2007, 'Combining cyclostationarity and the frequency domain subspace technique for operational modal analysis.', Key Engineering Materials, 347, pp. 473 - 478
, 2007, 'Cyclostationarity and the cepstrum for operational modal analysis of mimo systems - Part 1: modal parameter identification.', Mechanical Systems and Signal Processing, 21, pp. 2441 - 2458
, 2007, 'Cyclostationarity and the cepstrum for operational modal analysis of momo systems - Part II: obtaining scaled mode shapes through finite element model updating.', Mechanical Systems and Signal Processing, 21, pp. 2459 - 2473
, 2007, 'Enhancement of autoregressive model based gear tooth fault detection technique by the use of minimum entropy deconvolution filter', Mechanical Systems and Signal Processing, 21, pp. 906 - 919
, 2007, 'The enhancement of fault detection and diagnosis in rolling element bearings using minimum entropy deconvolution combined with spectral kurtosis.', Mechanical Systems and Signal Processing, 21, pp. 2616 - 2633
, 2007, 'The role of anti-resonance frequencies from operational modal analysis in finite element model updating', Mechanical Systems and Signal Processing, 21, pp. 74 - 97, http://dx.doi.org/10.1016/j.ymssp.2006.01.001
, 2006, 'Operational modal analysis of the saker race car with engine as excitation', 13th International Congress on Sound and Vibration 2006 Icsv 2006, 3, pp. 1898 - 1905
, 2006, 'Helicopter gearbox bearing blind fault identification using a range of analysis techniques', Proceedings of the 1st World Congress on Engineering Asset Management Wceam 2006, pp. 724 - 737, http://dx.doi.org/10.1007/978-1-84628-814-2_77
, 2006, 'The spectral kurtosis: application to the vibratory surveillance and diagnostics of rotating machines', Mechanical Systems and Signal Processing, 20, pp. 308 - 331
, 2005, 'Blind system identification using cyclostationarity and the complex cepstrum', Proceedings 8th International Symposium on Signal Processing and Its Applications Isspa 2005, 1, pp. 447 - 450, http://dx.doi.org/10.1109/ISSPA.2005.1580292
, 2005, 'Redundant data elimination in independent component analysis', Proceedings 8th International Symposium on Signal Processing and Its Applications Isspa 2005, 1, pp. 29 - 32, http://dx.doi.org/10.1109/ISSPA.2005.1580188
, 2005, 'Spectral kurtosis optimization for rolling element bearings', Proceedings 8th International Symposium on Signal Processing and Its Applications Isspa 2005, 2, pp. 839 - 842, http://dx.doi.org/10.1109/ISSPA.2005.1581069
, 2005, 'Blind source separation of internal combustion engine piston slap from other measured vibration signals', Mechanical Systems and Signal Processing, 19, pp. 1196 - 1208, http://www.sciencedirect.com/science/article/B6WN1-4H5DYB0-2/2/b3176615ff0442b4e05234e600083b7e
, 2005, 'Extraction of second-order cyclostationary sources--Application to vibration analysis', Mechanical Systems and Signal Processing, 19, pp. 1230 - 1244, http://www.sciencedirect.com/science/article/B6WN1-4H4T32Y-2/2/f00c1879bddf15fb9ee300d818c1561c
, 2005, 'On the use of the cyclic power spectrum in rolling element bearings diagnostics', Journal of Sound and Vibration, 281, pp. 463 - 468
, 2005, 'Use of the acceleration signal of a gearbox in order to perform angular resampling (with limited speed fluctuation)', Mechanical Systems and Signal Processing, 19, pp. 766 - 785
, 2004, 'Differential diagnosis of spall versus cracks in the gear tooth fillet region', Journal of Failure Analysis and Prevention, 4, pp. 63 - 71, http://dx.doi.org/10.1361/15477020420792
, 2004, 'Detection and diagnosis of incipient bearing failure in helicopter gearboxes', Engineering Failure Analysis, 11, pp. 177 - 190
, 2004, 'Differential diagnosis of spall versus cracks in the gear tooth fillet region.', Journal of Failure Analysis and Prevention, 4, pp. 57 - 65
, 2004, 'Enhanced unsupervised noise cancellation using angular resampling for planetary bearing fault diagnosis', International Journal of Acoustics and Vibration, 9, pp. 51 - 60
, 2004, 'State of the art in monitoring rotating machinery - Part 1', Sound and Vibration, 38, pp. 14 - 21
, 2004, 'State of the art in monitoring rotating machinery - Part 2', Sound and Vibration, 38, pp. 10 - 17
, 2004, 'Unsupervised noise cancellation for vibration signals: part 1 - evaluation of adaptive algorithms', Mechanical Systems and Signal Processing, 18, pp. 89 - 101
, 2004, 'Unsupervised noise cancellation for vibration signals: part II - a novel frequency-domain algorithm', Mechanical Systems and Signal Processing, 18, pp. 103 - 117
, 2003, 'A stochastic model for simulation and diagnostics of rolling element bearings with localized faults', Journal of Vibration and Acoustics - Transactions of the ASME, 125, pp. 282 - 289
, 2002, 'Effective vibration analysis of IC engines using cyclostationarity. Part II - New results on the reconstruction of the cylinder pressures', JOURNAL OF SOUND AND VIBRATION, 257, pp. 839 - 856, http://dx.doi.org/10.1006/jsvi.2002.5063
, 2002, 'Effective vibration analysis of IC engines using cyclostationarity. Part II - New results on the reconstruction of the cylinder pressures', Journal of Sound and Vibration, 257, pp. 839 - 856, http://dx.doi.org/10.1006/jsvi.2002.5063
, 2002, 'Differential diagnosis of gear and bearing faults', Journal of Vibration and Acoustics - Transactions of the ASME, 124(2), pp. 165 - 171
, 2001, 'Editorial for special edition on gear and bearing diagnostics', Mechanical Systems and Signal Processing, 15, pp. 827 - 829
, 2001, 'The relationship between spectral correlation and envelope analysis in the diagnostics of bearing faults and other cyclostationary machine signals.', Mechanical Systems and Signal Processing, 15, pp. 945 - 962
, 2000, 'A simulation model for training neural networks to recognise bearing faults', Proceedings of the 25th International Conference on Noise and Vibration Engineering ISMA, pp. 247 - 254
, 2000, 'An inspection model with minimal and major maintenance for a system with deterioration and Poisson failures', IEEE TRANSACTIONS ON RELIABILITY, 49, pp. 88 - 98, http://dx.doi.org/10.1109/24.855541
, 2000, 'Optimisation of bearing diagnostic techniques using simulated and actual bearing fault signals', Mechanical Systems and Signal Processing, 14, pp. 763 - 788
, 2000, 'The ITD mode-shape coherence and confidence factor and its application to separating eigenvalue positions in the Z-plane', Mechanical Systems and Signal Processing, 14, pp. 167 - 180
, 1999, 'A hybrid maintenance model with imperfect inspection for a system with deterioration and poisson failure', Journal of the Operational Research Society, 50, pp. 1229 - 1243, http://dx.doi.org/10.1057/palgrave.jors.2600819
, 1999, 'Influence of the resonant frequency on the control of knock in diesel engines', Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, pp. 127 - 133
, 1999, 'Reconstruction of diesel engine cylinder pressure using a time domain smoothing technique', Mechanical Systems and Signal Processing, 13, pp. 709 - 722
, 1998, 'Bearing diagnostics by digital analysis techniques in high background noise situations', Proceedings of the 23rd International Conference on Noise and Vibration Engineering ISMA, pp. 323 - 330
, 1998, 'Reconstruction of cylinder pressure time trace on a six-cylinder engine from acceleration measurements', Proceedings of the 23rd International Conference on Noise and Vibration Engineering ISMA, pp. 331 - 337
, 1998, 'Encoder error analysis in gear transmission error measurement', Proceedings of the Institution of Mechanical Engineers Part C - Mechanical Engineering Science, pp. 277 - 285
, 1998, 'Estimation of envelope spectra using maximum entropy spectral analysis and spectrum interpolation - application to diagnosing bearing defects from short time recordings', International Journal of COMADEM, 1, pp. 15 - 22
, 1998, 'Modelling of spur gear mesh stiffness and static transmission error', Proceedings of the Institution of Mechanical Engineers Part C - Mechanical Engineering Science, pp. 287 - 297
, 1997, 'Advanced machine diagnostics', The Shock and Vibration Digest, pp. 6 - 30
, 1996, 'Determination of frequency response functions from response measurements - I. Extraction of poles and zeros from response cepstra', Mechanical Systems and Signal Processing, 10, pp. 293 - 317
, 1996, 'Determination of frequency response functions from response measurements - II. Regeneration of frequency response functions from poles and zeros', Mechanical Systems and Signal Processing, 10, pp. 319 - 340
, 1996, 'Gear transmission error measurement using phase demodulation', Proceedings of the Institution of Mechanical Engineers Part C - Mechanical Engineering Science, pp. 201 - 213
, 1996, 'Multiple carrier demodulation of amplitude modulations by rectification - application to the detection of mechanical faults in rotating machines', Mechanical Engineering Transactions, pp. 137 - 145
Filter by type
https://orcid.org/0000-0003-4042-1566