ORCID as entered in ROS
https://orcid.org/0000-0003-4042-1566
Select Publications
Conference Papers
, 2004, 'Enhancement of second-order cyclostationary signals: application to vibration analysis', in IEEE International Conference on Acoustics, Speech, and Signal Processing; ICASSP, IEEE International Conference on Acoustics, Montreal, Canada, presented at
, 2004, 'Differential diagnosis of spall vs. cracks in the gear tooth fillet region.', in Pusey HC; Pusey SC; Hobbs WR (eds.), MFPT Technologies to Meet Corporate Goals, MFPT Technologies to Meet Corporate Goals, Virginia, USA, pp. 143 - 152, presented at
, 2004, 'Recent advances in bearing diagnostic techniques for helicopter gearboxes.', in Pusey HC; Pusey SC; Hobbs WR (eds.), MFPT Technologies to Meet Corporate Goals, MFPT Technologies to Meet Corporate Goals, Virginia, USA, pp. 1 - 10, presented at
, 2003, 'A new FFT-based method of separating discrete-frequency and random signals', in Enhancing company`s profitability and competitiveness through more accurate and reliable tools and methods for continuous and cost-effective improvement of maintenance, especially condition-based, Enhancing company`s profitability and competitiveness through more accurate and reliable tools and methods for continuous and cost-effective improvement of maintenance, especially condition-based, Vaxjo, Sweden, presented at
, 2003, 'A comparative study of curve-fitting algorithms for the extraction of modal parameters from response measurements', in International Congress on Sound and Vibration 2003, Stockholm, Sweden, pp. 4409 - 4416, presented at
, 2003, 'A new discrete-random signal separator', in Wespac VIII Conference: Acoustics on the move, Wespac VIII Conference: Acoustics on the move, Melbourne, presented at
, 2003, 'On the comparison of the use of AE and vibration analysis for early gear fault detection', in Wespac VIII Conference: Acoustics on the move, Wespac VIII Conference: Acoustics on the move, Melbourne, presented at
, 2002, 'Gear vibration modeling and fault characterization', in Proceedings of the 2002 International Conference on Noise and Vibration Engineering, ISMA, pp. 1487 - 1495
, 2002, 'Detection and diagnosis of incipient bearing failure in helicopter gearboxes', in International conference and Exhibition on Failure Analysis, International conference and Exhibition on Failure Analysis, Melbourne, presented at
, 2002, 'Diagnosis of localised and extended rolling element bearing faults in the presence of strong gear signals.', in 6th International Conference on Rotor Dynamics, 6th International Conference on Rotor Dynamics, University of New South Wales, presented at
, 2002, 'Matching signals from experiments at slightly different speeds', in Sas P; van Hal B (ed.), Modal Analysis Noise and Vibration Engineering, Leuven, Belgium, pp. 1595 - 1604, presented at
, 2002, 'State of the art in monitoring rotating machinery', in Sas P; van Hal B (ed.), Modal Analysis Noise and Vibration Engineering, Leuven, Belgium, pp. 1457 - 1477, presented at
, 2002, 'Updating modal properties from response-only measurements on a rail vehicle.', in Sas P; van Hal B (ed.), Modal Analysis Noise and Vibration Engineering, Leuven, Belgium, pp. 1299 - 1306, presented at
, 2002, 'Determination by rail carriage suspension characteristics by response measurements', in Applied Mechanics - Progress and Applications, Applied Mechanics - Progress and Applications, University of Sydney, NSW, presented at
, 2002, 'Differential diagnostics of gear and bearing faults using spectral correlation.', in Applied Mechanics - Progress and Applications, Applied Mechanics - Progress and Applications, University of Sydney, NSW, presented at
, 2002, 'Using transient analysis software to simulate vibration signals due to rolling element bearing defects', in Applied Mechanics - Progress and Applications, Applied Mechanics - Progress and Applications, University of Sydney, NSW, presented at
, 2001, 'Separation of gear and bearing fault signals in helicopted gearboxes.', in 4th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, 4th International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques, University of Technology of Compiegne, France, pp. 161 - 172, presented at
, 2001, 'Bearing diagnostics in helicopter gearboxes.', in Comadem 2001, Manchester University, UK, presented at
, 2001, 'Optimisation of SANC for separating gear and bearing signals.', in Comadem 2001, Manchester University, UK, presented at
, 2001, 'Simulation of vibration signals from a rolling element bearing defect.', in Forsyth GF (ed.), DSTO International Conference on Health and Usage Monitoring, DSTO International Conference on Health and Usage Monitoring, Melbourne, pp. 37 - 52, presented at
, 2000, 'Research into machine diagnostics at the DSTO centre of expertise in vibration analysis', in 2nd International congress of technical diagnostics, 2nd International congress of technical diagnostics, Warsaw, Poland, pp. CD Rom - CD Rom, presented at
, 2000, 'A simulation model for training neural networks to recognise bearing faults', in Sas P; Moens D (ed.), 25th International conference on modal analysis noise and vibration engineering, 25th International conference on modal analysis noise and vibration engineering, Katholieke Universiteit Leuven, Belgium, pp. CD Rom - CD Rom, presented at
, 2000, 'A simulation model for training neural networks to recognise bearing faults', in Sas P; Moens D (ed.), NOISE AND VIBRATION ENGINEERING, VOLS 1 - 3, PROCEEDINGS, KATHOLIEKE UNIV LEUVEN, DEPT WERKTUIGKUNDE, BELGIUM, LEUVEN, pp. 225 - 232, presented at
, 2000, 'A comparison of cyclostationary and envelope analysis in the diagnostics of rolling element bearings', in IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP2000), Istanbul, Turkey, presented at
, 1998, 'Diagnosis of railway bearing faults from track response vibrations', in COMADEM 1998, COMADEM `98, Launceston, presented at
, 1998, 'Improving the efficiency of SANC in its application to bearing diagnostics', in COMADEM 1998, COMADEM `98, Launceston, presented at
, 1998, 'Using CPB spectrum differences to train neural network to recognise faults in helicopter gearbox bearings', in COMADEM 1998, COMADEM `98, Launceston, presented at
, 1998, 'Updating modal models from response measurements', in 12th Australasian Compumod Users` Conference, Hunter Valley, NSW, Australia, presented at
, 1998, 'Bearing diagnostics by digital analysis techniques in high background noise situations', in Sas P (ed.), International Conference on Noise and Vibration Engineering 1998, International Conference on Noise and Vibration Engineering 1998, Leuven, Belgium, pp. 1379 - 1386, presented at
, 1998, 'Reconstruction of cylinder pressure time trace on a six-cylinder engine from acceleration measurements', in Sas P (ed.), International Conference on Noise and Vibration Engineering 1998, International Conference on Noise and Vibration Engineering 1998, Leuven, Belgium, pp. 1387 - 1393, presented at
, 1998, 'Prediction and measurement of dynamic gear transmission error', in 5th International Conference on Rotor Dynamics, 5th International Conference on Rotor Dynamics, Darmstadt University of Technology, presented at
, 1998, 'Some developments in machine condition monitoring', in 5th International Conference on Rotor Dynamics, 5th International Conference on Rotor Dynamics, Darmstadt University of Technology, presented at
, 1998, 'Bearing diagnostics in helicopter gearboxes', in Djojodihardjo H; Laschka B; Wood LA; Singh R (eds.), 3rd International Symposium on Advanced and Aerospace Science and Technology in Indonesia, 3rd International Symposium on Advanced and Aerospace Science and Technology in Indonesia, Jakarta, Indonesia, pp. 157 - 163, presented at
, 1998, 'Detection of helicopter pinion bearing faults by vibration analysis', in Djojodihardjo H; Laschka B; Wood LA; Singh R (eds.), 3rd International Symposium on Advanced and Aerospace Science and Technology in Indonesia, 3rd International Symposium on Advanced and Aerospace Science and Technology in Indonesia, Jakarta, Indonesia, pp. 675 - 682, presented at
, 1998, 'Detecting helicopter gearbox bearing faults using CPB spectra', in 2nd Australian Pacific Vertiflite Conference on Helicopter Technology, 2nd Australian Pacific Vertiflite Conference on Helicopter Technology, ADFA, Canberra, pp. None - None, presented at
, 1998, 'Manifestations of bearing fault vibrations in helicopter gearboxes', in 2nd Australian Pacific Vertiflite Conference on Helicopter Technology, 2nd Australian Pacific Vertiflite Conference on Helicopter Technology, ADFA, Canberra, pp. None - None, presented at
, 1997, 'Developments in digital analysis techniques for diagnostics of bearings and gears', in 5th International Congress on Sound and Vibration, 5th International Congress on Sound and Vibration, University of Adelaide, SA, pp. (Cd-rom) a, presented at
, 1997, 'Effects of time delay, order of FIR filter and convergence factor on self adaptive noise cancellation', in 5th International Congress on Sound and Vibration, 5th International Congress on Sound and Vibration, University of Adelaide, SA, pp. (Cd-rom) a, presented at
, 1997, 'Mechanical signature enhancement of response vibrations in the time lag domain', in 5th International Congress on Sound and Vibration, 5th International Congress on Sound and Vibration, University of Adelaide, SA, pp. (Cd-rom) a, presented at
, 1997, 'Enhanced envelope analysis of bearing signals using digital techniques', in Jantunen E; Holmberg K; Rao RB K (eds.), Int Cong and Exhibition of Condition Monitoring and Diagnostic Engineering Management, TECHNICAL RESEARCH CENTRE FINLAND, Espoo, Finland, pp. 233 - 242, presented at
, 1996, 'Diesel engine cylinder pressure reconstruction', in Int Conference on Noise and Vibration Engineering, International Conference on Noise and Vibration Engineering 1996, Leuven, Belgium, presented at
, 1996, 'Masking effects in digital envelope analysis of faulty bearing signals', in Int Conference on Vibrations in Rotating Machinery, International Conference on Vibrations in Rotating Machinery, Oxford, England, presented at
, 1996, 'A comparison of time-frequency distributions applied to bearing diagnostics', in Australasian Congress on Applied Mechanics, Australasian Congress on Applied Mechanics, Melbourne, presented at
, 1995, 'Diagnostics of planetary gear bearings in the presence of gear vibrations', in 2nd International Conference Gearbox Noise etc, MECHANICAL ENGINEERING PUBL, London, England, pp. 73 - 80, presented at
, 1995, 'Sources of gear signal modulation', in 2nd International Conference Gearbox Noise etc, MECHANICAL ENGINEERING PUBL, London, England, pp. 183 - 198, presented at
, 1995, 'An inspection model with minimal and major maintenance for a flexible manufacturing cell using generalized stochastic petri nets', in Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), pp. 335 - 356, http://dx.doi.org/10.1007/3-540-60029-9_48
, 1993, 'Evaluation of cushioning properties of closed-cell plastic foams', in National Conference Publication - Institution of Engineers, Australia, pp. 95 - 101
, 1990, 'Analytical and experimental vibration analysis of a gearbox casing', in National Conference Publication - Institution of Engineers, Australia, pp. 68 - 72
, 1990, 'Hilbert transform techniques for torsional vibration analysis', in National Conference Publication - Institution of Engineers, Australia, pp. 122 - 126
, 1984, 'SEPARATING EXCITATION AND STRUCTURAL RESPONSE EFFECTS IN GEARBOXES.', in I Mech E Conference Publications (Institution of Mechanical Engineers), pp. 101 - 107
Filter by type
https://orcid.org/0000-0003-4042-1566