By Emeritus Professor Jun Wang

Journal articles

Chen Y; Wang J; Chen M, 2019, 'Enhancing the machining performance by cutting tool surface modifications: a focused review', Machining Science and Technology, 23, pp. 477 - 509, http://dx.doi.org/10.1080/10910344.2019.1575412

Nguyen T; Wang J, 2019, 'A review on the erosion mechanisms in abrasive waterjet micromachining of brittle materials', International Journal of Extreme Manufacturing, 1, pp. 012006 - 012006, http://dx.doi.org/10.1088/2631-7990/ab1028

Feng S; Huang C; Wang J; Jia Z, 2019, 'Surface quality evaluation of single crystal 4H-SiC wafer machined by hybrid laser-waterjet: Comparing with laser machining', Materials Science in Semiconductor Processing, 93, pp. 238 - 251, http://dx.doi.org/10.1016/j.mssp.2018.12.037

Wang Z; Huang C; Wang J; Wang P; Bi S; Abbas CA, 2019, 'Design and Simulation of Flow Field for Bone Tissue Engineering Scaffold Based on Triply Periodic Minimal Surface', Chinese Journal of Mechanical Engineering (English Edition), 32, http://dx.doi.org/10.1186/s10033-019-0329-7

Wang Z; Huang C; Wang J; Zou B, 2019, 'Development of a novel aqueous hydroxyapatite suspension for stereolithography applied to bone tissue engineering', Ceramics International, 45, pp. 3902 - 3909, http://dx.doi.org/10.1016/j.ceramint.2018.11.063

Thongkaew K; Wang J; Li W, 2019, 'An investigation of the hole machining processes on woven carbon-fibre reinforced polymers (CFRPs) using abrasive waterjets', Machining Science and Technology: an international journal, 23, pp. 19 - 38, http://dx.doi.org/10.1080/10910344.2018.1449217

Lv Z; Hou R; Tian Y; Huang C; Zhu H; Wang J, 2019, 'Dynamic response of ceramic material subjected to impact of hard particle', Materials Research Express, 6, http://dx.doi.org/10.1088/2053-1591/aafaab

Jia Y; Qi Y; Wang Y; Ma X; Xu Y; Wang J; Zhang X; Gao M; Cong B; Han S, 2019, 'Overexpression of CD59 inhibits apoptosis of T-acute lymphoblastic leukemia via AKT/Notch1 signaling pathway', CANCER CELL INTERNATIONAL, 19, http://dx.doi.org/10.1186/s12935-018-0714-9

Zhang Z; Yao P; HAUNG C; Wang J; XUE D; DENG W; Zhang Z, 2019, 'Investigation and modeling of microgrooves generated on diamond grinding wheel by abrasive waterjet based on Box–Behnken experimental design', The International Journal of Advanced Manufacturing Technology, 100, pp. 321 - 332, http://dx.doi.org/10.1007/s00170-018-2749-4

Yao Y; Zhu H; Huang C; Wang J; Zhang P; Yao P; Wang X, 2019, 'Determination of the minimum chip thickness and the effect of the plowing depth on the residual stress field in micro-cutting of 18 Ni maraging steel', International Journal of Advanced Manufacturing Technology, http://dx.doi.org/10.1007/s00170-019-04439-x

Zhang Z; Yao P; Wang J; Huang C; Zhu H; Liu H; Zou B, 2019, 'Nanomechanical characterization of RB-SiC ceramics based on nanoindentation and modelling of the ground surface roughness', Ceramics International, 46, http://dx.doi.org/10.1016/j.ceramint.2019.11.094

Deng Y; Han Q; Mei S; Li H; Yang F; Wang J; Ge S; Jing X; Xu H; Zhang T, 2019, 'Cyclin-dependent kinase subunit 2 overexpression promotes tumor progression and predicts poor prognosis in uterine leiomyosarcoma', ONCOLOGY LETTERS, 18, pp. 2845 - 2852, http://dx.doi.org/10.3892/ol.2019.10668

Zhu H; Yao P; Wang J, 2018, 'A study of hybrid laser-waterjet micromachining of crystalline germanium', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232, pp. 1903 - 1917, http://dx.doi.org/10.1177/0954405416654189

Zhang R; Huang C; Wang J; Zhu H; Yao P; Feng S, 2018, 'Micromachining of 4H-SiC using femtosecond laser', Ceramics International, 44, pp. 17775 - 17783, http://dx.doi.org/10.1016/j.ceramint.2018.06.245

Chen Y; Li H; Hou L; Wang J; Bu X, 2018, 'An intelligent chatter detection method based on EEMD and feature selection with multi-channel vibration signals', Measurement: Journal of the International Measurement Confederation, 127, pp. 356 - 365, http://dx.doi.org/10.1016/j.measurement.2018.06.006

Nguyen T; Liu D; Thongkaew K; Li H; Qi H; Wang J, 2018, 'The wear mechanisms of reaction bonded silicon carbide under abrasive polishing and slurry jet impact conditions', Wear, 410-411, pp. 156 - 164, http://dx.doi.org/10.1016/j.wear.2018.06.001

Chen Y; Li H; Wang J, 2018, 'Predictive modelling of cutting forces in end milling of titanium alloy Ti6Al4V', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232, pp. 1523 - 1534, http://dx.doi.org/10.1177/0954405416673108

Feng S; Huang C; Wang J; Zhu H, 2018, 'Material removal of single crystal 4H-SiC wafers in hybrid laser-waterjet micromachining process', Materials Science in Semiconductor Processing, 82, pp. 112 - 125, http://dx.doi.org/10.1016/j.mssp.2018.03.035

Wang X; Huang C; Zou B; Liu G; Zhu H; Wang J, 2018, 'Experimental study of surface integrity and fatigue life in the face milling of Inconel 718', FRONTIERS OF MECHANICAL ENGINEERING, 13, pp. 243 - 250, http://dx.doi.org/10.1007/s11465-018-0479-9

Bai X; Huang C; Wang J; Zou B; Liu H, 2018, 'Sintering mechanisms of Al2O3-based composite ceramic tools having 25% Si3N4 additions', International Journal of Refractory Metals and Hard Materials, 73, pp. 132 - 138, http://dx.doi.org/10.1016/j.ijrmhm.2018.01.010

Lv Z; Hou R; Huang C; Zhu H; Wang J, 2018, 'Investigation on erosion mechanism in ultrasonic assisted abrasive waterjet machining', International Journal of Advanced Manufacturing Technology, 94, pp. 3741 - 3755, http://dx.doi.org/10.1007/s00170-017-0995-5

Wang L; Huang C; Wang J; Zhu H; Liang X, 2018, 'An experimental investigation on laser assisted waterjet micro-milling of silicon nitride ceramics', Ceramics International, 44, pp. 5636 - 5645, http://dx.doi.org/10.1016/j.ceramint.2017.12.211

Wang Y; Li C; Zhang Y; Yang M; Li BK; Dong L; Wang J, 2018, 'Processing Characteristics of Vegetable Oil-based Nanofluid MQL for Grinding Different Workpiece Materials', International Journal of Precision Engineering and Manufacturing - Green Technology, 5, pp. 327 - 339, http://dx.doi.org/10.1007/s40684-018-0035-4

Zhao B; Liu H; Huang C; Wang J; Cheng M; Zhan Q, 2018, 'Evolution mechanisms of high temperature mechanical properties and microstructures of Al2O3/SiCw/TiCnnanocomposite materials', Journal of Alloys and Compounds, 737, pp. 46 - 52, http://dx.doi.org/10.1016/j.jallcom.2017.12.100

Li M; Huang C; Zhao B; Liu H; Wang J; Liu Z, 2018, 'Crack-healing behavior of Al2O3-TiB2-TiSi2ceramic material', Ceramics International, 44, pp. 2132 - 2137, http://dx.doi.org/10.1016/j.ceramint.2017.10.164

Li H; Wang J; Kwok N; Nguyen T; Yeoh GH, 2018, 'A study of the micro-hole geometry evolution on glass by abrasive air-jet micromachining', Journal of Manufacturing Processes, 31, pp. 156 - 161, http://dx.doi.org/10.1016/j.jmapro.2017.11.013

Zhang P; Zhu H; Huang C; Wang J; Yao Y; Yao P, 2018, 'Experimental study on micro milling holes in high-strength elastic alloy 3J33', IPPTA: Quarterly Journal of Indian Pulp and Paper Technical Association, 30, pp. 637 - 650

Wang J; Xu M-Q; Jiang X-L; Mei X-Y; Liu X-G, 2018, 'Histone deacetylase inhibitor SAHA-induced epithelial-mesenchymal transition by upregulating Slug in lung cancer cells', ANTI-CANCER DRUGS, 29, pp. 80 - 88, http://dx.doi.org/10.1097/CAD.0000000000000573

Zhao B; Liu H; Huang C; Wang J; Cheng M, 2017, 'Theoretical hardness analysis and experimental verification for composite ceramic tool materials', Ceramics International, 43, pp. 15580 - 15585, http://dx.doi.org/10.1016/j.ceramint.2017.08.112

Li M; Huang C; Zhao B; Liu H; Wang J; Liu Z, 2017, 'Mechanical properties and microstructure of Al2O3-TiB2-TiSi2ceramic tool material', Ceramics International, 43, pp. 14192 - 14199, http://dx.doi.org/10.1016/j.ceramint.2017.07.162

Yun H; Zou B; Wang J, 2017, 'Effects of sintering temperature and nano Ti(C,N) on the microstructure and mechanical properties of Ti(C,N) cermets cutting tool materials with low Ni-Co', Materials Science and Engineering A, 705, pp. 98 - 104, http://dx.doi.org/10.1016/j.msea.2017.08.033

Li L; Wang J, 2017, 'Direct writing of large-area micro/nano-structural arrays on single crystalline germanium substrates using femtosecond lasers', Applied Physics Letters, 110, pp. 251901 - 251901, http://dx.doi.org/10.1063/1.4986784

Feng S; Huang CZ; Wang J; Zhu HT, 2017, 'An analytical model for the prediction of temperature distribution and evolution in hybrid laser-waterjet micro-machining', Precision Engineering, 47, pp. 33 - 45, http://dx.doi.org/10.1016/j.precisioneng.2016.07.002

Feng S; Huang CZ; Wang J; Zhu HT, 2017, 'Investigation and modelling of hybrid laser-waterjet micromachining of single crystal SiC wafers using response surface methodology', Materials Science in Semiconductor Processing, 68, pp. 199 - 212, http://dx.doi.org/10.1016/j.mssp.2017.05.029

Wang RJ; Wang C; Wen W; Wang J, 2017, 'Experimental study on a micro-abrasive slurry jet for glass polishing', International Journal of Advanced Manufacturing Technology, 89, pp. 151 - 162, http://dx.doi.org/10.1007/s00170-016-9109-z

Wang W; Yao P; Wang J; Huang C; Zhu H; Liu H; Zou B; Liu Y, 2017, 'Controlled material removal mode and depth of micro cracks in precision grinding of fused silica - A theoretical model and experimental verification', Ceramics International, 43, pp. 11596 - 11609, http://dx.doi.org/10.1016/j.ceramint.2017.05.327

Wang RJ; Wang CY; Wen W; Wang J, 2017, 'Experimental study on a micro-abrasive slurry jet for glass polishing', International Journal of Advanced Manufacturing Technology, 89, pp. 451 - 462, http://dx.doi.org/10.1007/s00170-016-9109-z

Wang W; Yao P; Wang J; Huang C; Kuriyagawa T; Zhu H; Zou B; Liu H, 2017, 'Elastic stress field model and micro-crack evolution for isotropic brittle materials during single grit scratching', Ceramics International, 43, pp. 10726 - 10736, http://dx.doi.org/10.1016/j.ceramint.2017.05.054

Feng S; Huang C; Wang J; Zhu H; Yao P; Liu Z, 2017, 'An analytical model for the prediction of temperature distribution and evolution in hybrid laser-waterjet micro-machining', Precision Engineering, 47, pp. 33 - 45, http://dx.doi.org/10.1016/j.precisioneng.2016.07.002

Zhu H; Wang J; Yao P; Huang C, 2017, 'Heat transfer and material ablation in hybrid laser-waterjet microgrooving of single crystalline germanium', International Journal of Machine Tools and Manufacture, 116, pp. 25 - 39, http://dx.doi.org/10.1016/j.ijmachtools.2017.01.002

Thongkaew K; Wang J, 2017, 'An experimental study of the particle velocities in abrasive waterjets', International Journal of Abrasive Technology, 8, pp. 147 - 156, http://dx.doi.org/10.1504/IJAT.2017.089291

Jing X; Li H; Wang J; Yuan Y; Zhang D; Kwok N; Nguyen T, 2017, 'An investigation of surface roughness in micro-end-milling of metals', Australian Journal of Mechanical Engineering, 15, pp. 166 - 174, http://dx.doi.org/10.1080/14484846.2016.1211472

Zhang Y; Li C; Ji H; Yang X; Yang M; Jia D; Zhang X; Li R; Wang J, 2017, 'Analysis of grinding mechanics and improved predictive force model based on material-removal and plastic-stacking mechanisms', International Journal of Machine Tools and Manufacture, 122, pp. 81 - 97, http://dx.doi.org/10.1016/j.ijmachtools.2017.06.002

Wei X; Nie S; Liu H; Sun J; Liu J; Li J; Li S; Wang S; Han S; Wang J; Sun Y, 2017, 'Angiopoietin-like protein 2 facilitates non-small cell lung cancer progression by promoting the polarization of M2 tumor-associated macrophages', AMERICAN JOURNAL OF CANCER RESEARCH, 7, pp. 2220 - 2233

Zhao B; Liu H; Huang CZ; Wang J; Cheng M, 2017, 'Fabrication and mechanical properties of Al 2 O 3 -SiC w -TiC np ceramic tool material', Ceramics International, 43, pp. 10224 - 10230, http://dx.doi.org/10.1016/j.ceramint.2017.05.049

Yang M; Li C; Zhang Y; Jia D; Zhang X; Hou Y; Li R; Wang J, 2017, 'Maximum undeformed equivalent chip thickness for ductile-brittle transition of zirconia ceramics under different lubrication conditions', International Journal of Machine Tools and Manufacture, 122, pp. 55 - 65, http://dx.doi.org/10.1016/j.ijmachtools.2017.06.003

Liu D; Huang C; Zhu H; Wang J; Yao P, 2016, 'Investigation on Material Response to Ultrahigh Velocity Impact on Ceramics by Micro Particle', Tribology Letters, 64, pp. 1 - 13, http://dx.doi.org/10.1007/s11249-016-0779-3

Lv Z; Huang C; Zhu H; Wang J; Hou R, 2016, 'A 3D simulation of the fluid field at the jet impinging zone in ultrasonic-assisted abrasive waterjet polishing', The International Journal of Advanced Manufacturing Technology, 87, pp. 3091 - 3103, http://dx.doi.org/10.1007/s00170-016-8722-1

Wang W; Yao P; Wang J; Huang C; Zhu H; Zou B; Liu H; Yan J, 2016, 'Crack-free ductile mode grinding of fused silica under controllable dry grinding conditions', International Journal of Machine Tools and Manufacture, 109, pp. 126 - 136, http://dx.doi.org/10.1016/j.ijmachtools.2016.07.007

Wang J; Li W, 2016, 'A new look into the loose particle impact process for ductile materials', Materials Science Forum, 874, pp. 213 - 218, http://dx.doi.org/10.4028/www.scientific.net/MSF.874.213

Back to profile page