By Emeritus Professor Jun Wang

Books

, 2012, Advances in Materials Processing X, Huang CZ; Zhu HT; Wang J; Li X, (eds.), Trans Tech Publicaitons, United Kingdom, http://www.ttp.net/978-3-03785-399-3.html

Wang J, 2003, Abrasive Waterjet Machining of Engineering Materials, Trans Tech Publications, Uetikon-Zuerich, Switzerland

Book Chapters

Yamaguchi H; Williams R; Wang J; Shih A; Altena H; Lei S; Kuriyagawa T; Umehara N, 2020, 'Subtractive Processes — Non-Traditional Operations', in Huang Y; Wang L; Liang SY (ed.), Handbook of Manufacturing, World Scientific Publishing Co. Pte. Ltd, Singapore, pp. 95 - 190, http://dx.doi.org/10.1142/9789813271029_0003

Ali Y; Wang J, 2010, 'Impact Abrasive Machining', in Jackson MJ; Davim JP (ed.), Machining with Abrasives, Springer, NY Dordrecht Heidelberg London, pp. 385 - 419

Feng YX; Huang CZ; Wang J; Hou RG; Lu XY, 2007, 'An Experimental Study on Milling Al₂O₃ Ceramics with Abrasive Waterjet', in Key Engineering Materials, Trans Tech Publications Ltd., pp. 500 - 504, http://dx.doi.org/10.4028/0-87849-430-8.500

Hou RG; Huang CZ; Wang J; Lu XY; Feng YX, 2007, 'Simulation of Solid-Liquid Two-Phase Flow Inside and Outside the Abrasive Water Jet Nozzle', in Key Engineering Materials, Trans Tech Publications Ltd., pp. 453 - 457, http://dx.doi.org/10.4028/0-87849-430-8.453

Wang X; Wang J, 2006, 'Abrasive Water Jet Machining', in Wang Y (ed.), China Materials Engineering Canon, Chapter 4 in Volume 25/Part 5 Materials High-Energy Beam Machining Technologies, Chemical Industry Press, Beijing, pp. 125 - 145

Wang J, 2003, 'Economic optimization of machining operations in computer-aided manufacturing systems', in Leondes CT (ed.), Major Reference Work on Computer Aided and Integrated Manufacturing Systems - Volume 5 Manufacturing Processes, World Scientific, Singapore, pp. 131 - 160

Edited Books

Wang J; Liu D; Nguyen T, (eds.), 2018, Advances in Materials Processing XIII, Proceedings of the 13th Asia-Pacific Conference on Materials Processing

Krajnik P; Rashid A; Aoyama H; Xu XP; Wang J, (eds.), 2016, Advances in Abrasive Technology XIX, Tans Tech Publicaitons, Switzerland

Liu GJ; Wang J, (ed.), 2016, Advances in Material Processing XII, Trans Tech Publications, Switzerland

Yuan JL; Chen M; Wang J; Zhou LB; Lv BH, (eds.), 2013, Advances in Abrasive Technology XVI, Trans Tech Publications, Switzerland, http://www.ttp.net/978-3-03785-825-7.html

Zhang Y; Buttler DL; Wang J; Li X; Yui A; Zhou L, (eds.), 2012, Advances in Abrasive Technology XV, Trans Tech Publications, Switzerland

Huang C; Zhu H; Wang J; Li X, (eds.), 2012, Advances in Materials Processing X, Trans Tech Publications, Switzerland, http://www.scopus.com/inward/record.url?eid=2-s2.0-84860775646&partnerID=40&md5=6ba8cc5286792a8a8bed42dc05525a44

Wang J; Mathew P; Li X; Huang C; Zhu H, (eds.), 2010, Advances in Materials Processing IX, Trans Tech Publications, http://www.scopus.com/inward/record.url?eid=2-s2.0-77955457068&partnerID=40&md5=cb97b67b2e534ff963c45b182e16c898

Yan Q; Liu J; Wang J; Gao H, (eds.), 2010, Surface Finishing Technology and Surface Engineering II, Trans Tech Publications, http://www.scopus.com/inward/record.url?eid=2-s2.0-78651243712&partnerID=40&md5=eaffcc3a2679d38e0799924083bd4046

Huang H; Zhang L; Wang J; Jiang Z; Zhou L; Xu X, (eds.), 2009, Advances in Abrasive Technology XII, Trans Tech Publications, Switzerland

Guo D; Wang J; Jia Z; Kang R; Gao H; Wang X, (eds.), 2009, Advances in Materials Manufacturing Science and Technology XIII - Volume 1, Trans Tech Publications Ltd

Guo D; Wang J; Jia Z; Kang R; Gao H; Wang X, (eds.), 2009, Advances in Materials Manufacturing Science and Technology XIII - Volume 2, Trans Tech Publications Ltd

Wang C; Li X; Wang J, (eds.), 2008, Proceedings of the 8th Asia-Pacific Conference on Materials Processing, Frontiers in Design and Manufacturing Publications

Guo D; Kuriyagawa T; Wang J; Tamaki J, (eds.), 2007, Advances in Abrasive Technology IX, Trans Tech Publications

Gao H; Wang J; Wang X; Guo D, (eds.), 2006, Advances in Abrasive Machining and Surfacing Technologies: Proceedings of International Conference on Surface Finish Technology and Surface Engineering, Frontiers in Design and Manufacturing Publications

Jia Z; Wang X; Guo D; Wang J, (eds.), 2006, Current Development in Abrasive Technology: Proceedings of 9th International Symposium on Advances in Abrasive Technology, Frontiers in Design and Manufacturing Publications

Zhang X; Wang C; Wang J, (eds.), 2006, Design and Manufacturing for Sustainable Development: Proceedings of the 7th International Conference on Frontiers in Design and Manufacturing Vol. 2, Frontiers in Design and Manufacturing Publications

Zhang X; Wang C; Wang J, (eds.), 2006, Design and Manufacturing for Sustainable Development: Proceedings of the 7th International Conference on Frontiers in Design and Manufacturing Vol. 3, Frontiers in Design and Manufacturing Publications

Zhang X; Wang C; Wang J, (eds.), 2006, Design and Manufacturing for Sustainable Development: Proceedings of the 7th International Conference on Frontiers in Design and Manufacturing, Vol. 1, Frontiers in Design and Manufacturing Publications

Wang J; Guo D; Wang D; Wang J, (eds.), 2002, Frontiers in Design and Manufacturing: Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing, Vol. 1, ICFDM publication

Guo D; Wang D; Wang J, (eds.), 2002, Frontiers in Design and Manufacturing: Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing, Vol. 2, ICFDM publication

Wang J; Scott W; Zhang L, (eds.), 1999, Abrasive Technology: Current Development and Applications I, World Scientific Publisher, Singapore

Journal articles

Guo D; Dun T; Wang J; Zheng L; Wang C, 2026, 'On the dual-pulse-width laser assisted waterjet micromachining process for monocrystalline silicon carbides', Precision Engineering, 102, pp. 320 - 333, http://dx.doi.org/10.1016/j.precisioneng.2026.06.023

Hu X; Ding F; Zheng L; Wang C; Wang J; Chen S; Hong Y; Li W, 2026, 'Micro-edged milling cutters: A new paradigm in low-damage milling of brittle materials', Journal of Materials Processing Technology, 355, http://dx.doi.org/10.1016/j.jmatprotec.2026.119408

Li Y; Ding F; Zheng L; Wang C; Tang X; Yang H; Liu W; Wang J, 2026, 'Self-heating-induced plastic flow strategy for thread milling of Zr-based BMGs', Journal of Manufacturing Processes, 169, pp. 38 - 50, http://dx.doi.org/10.1016/j.jmapro.2026.04.042

Baghel M; Mustafa G; Wang T; Wang J; Guo P; Zhang S, 2026, 'Modeling and compensation for radial thermal error of a vertical machining center spindle', International Journal of Advanced Manufacturing Technology, 145, pp. 2201 - 2222, http://dx.doi.org/10.1007/s00170-026-18450-6

Wang J; Hou W; Zhang S, 2026, 'Tool wear prediction based on multi-scale dilated convolution long short-term memory network with channel-spatial attention', International Journal of Advanced Manufacturing Technology, 145, pp. 3783 - 3809, http://dx.doi.org/10.1007/s00170-026-18552-1

Li B; Huang C; Liu H; Chen Z; Tang Z; Niu J; Wang J; Wang Z; Xu L; Huang S, 2026, 'Drill wear and its effect on surface integrity in BTA deep hole drilling of heterogeneous materials', Wear, 593, http://dx.doi.org/10.1016/j.wear.2026.206643

Dun T; Guo D; Jing Y; Liu Z; Zheng L; Wang J, 2026, 'Development of a hybrid laser-waterjet technology for damage-free surface texturing on 4H-SiC substrates', Optics Express, 34, pp. 16862 - 16874, http://dx.doi.org/10.1364/OE.592558

He F; Zhang M; Li S; Xie J; Cheng X; Wei X; Wang J; Wang C; Zheng L, 2026, 'A review on field assisted laser processing of difficult-to-process metals', Journal of Materials Processing Technology, 351, http://dx.doi.org/10.1016/j.jmatprotec.2026.119268

Jing Y; Du X; Guo D; Liu D; Zheng L; Wang C; Wang J, 2026, 'The erosive mechanisms and machining performance in abrasive waterjet cutting of iron-based amorphous alloy-resin laminations', Journal of Materials Research and Technology, 42, pp. 7196 - 7211, http://dx.doi.org/10.1016/j.jmrt.2026.05.051

Ding F; Tao P; Zhang T; Lai Z; Wu H; Wang J; Zheng L; Shen X; Wang C, 2026, 'In situ surface rejuvenation and plasticity enhancement of Zr-based bulk metallic glass by high-speed cutting', Journal of Materials Processing Technology, 349, http://dx.doi.org/10.1016/j.jmatprotec.2026.119232

Dai Y; Bao H; Liu D; Zhao J; Zhao R; Zhu H; Huang C; Wang J; Zhang W; Zhang Y, 2026, 'Micro-mechanisms of abrasive air jet micro-texturing on cast iron', Journal of the Brazilian Society of Mechanical Sciences and Engineering, 48, http://dx.doi.org/10.1007/s40430-026-06388-5

Guo D; Hou X; Jing Y; Dun T; Wang J; Zheng L, 2026, 'The non-graphitization machining process and performance models for hybrid laser-waterjet micromachining of polycrystalline diamonds', Diamond and Related Materials, 163, http://dx.doi.org/10.1016/j.diamond.2026.113360

Jiang L; Kong X; Zhang Y; Zheng L; Wang J; Wang C, 2026, 'Synergistic effects of laser-fabricated conductive hydrogel microstructure and electrical stimulation on cell behaviors', Journal of Materials Science, 61, pp. 4122 - 4135, http://dx.doi.org/10.1007/s10853-025-12136-2

Wang T; Guo P; Wang J; Mustafa G; Meng X; Chen X; Zhang S, 2026, 'A decoupling modeling method for thermal error prediction of machine tool linear feed axes applicable to cross-conditions', Applied Thermal Engineering, 283, http://dx.doi.org/10.1016/j.applthermaleng.2025.128940

Dun T; Jing Y; Guo D; Liu Z; Wang J; Zheng L, 2026, 'An experimental study of the hybrid laser-waterjet micromachining performance for 4 H-SiC', International Journal of Advanced Manufacturing Technology, http://dx.doi.org/10.1007/s00170-026-18637-x

Zhu H; Zhang W; Xie W; Zhang Z; Wang J; Ye Y; Xu K; Chen M; Liu Y; Wu J; Wang J, 2025, 'Hybrid polishing of mm-TSVs using laser cavitation-driven micro-abrasive erosion and laser-enhanced electrochemical corrosion', Journal of Manufacturing Processes, 155, pp. 1113 - 1132, http://dx.doi.org/10.1016/j.jmapro.2025.10.070

Zheng L; Li Y; Sun Z; Luo Y; Xu Y; Wang J; Wang C; Wei X, 2025, 'Quantitative Detection of Micro Hole Wall Roughness in PCBs Based on Improved U-Net Model', Chinese Journal of Mechanical Engineering English Edition, 38, http://dx.doi.org/10.1186/s10033-025-01245-3

Lv X; Li Y; Wang J, 2025, 'Lapping trajectories analysis and experimental study of the miniature balls lapping process using a plate with discontinuous sectors of fixed abrasives', Journal of Manufacturing Processes, 153, pp. 421 - 433, http://dx.doi.org/10.1016/j.jmapro.2025.09.024

Wang J; Guo P; Li J; Wang J; Wang J; Zhang S, 2025, 'Point clouds restoration of milling surfaces with considering micro-nano scale geometric features', Measurement Journal of the International Measurement Confederation, 255, http://dx.doi.org/10.1016/j.measurement.2025.118055

Dun T; Guo D; Lu Y; Liu Z; Yang H; Hou X; Wang J, 2025, 'Experimental study and predictive model on laser-assisted waterjet micromachining single crystal silicon carbide', Jingangshi Yu Moliao Moju Gongcheng Diamond and Abrasives Engineering, 45, pp. 569 - 580, http://dx.doi.org/10.13394/j.cnki.jgszz.2024.0154

Li B; Huang C; Chen Z; Liu H; Niu J; Wang J; Wang Z; Xu L; Huang S, 2025, 'Change of the machined hole wall surface roughness, microstructure and microhardness of low alloy steel caused by drill-guide-pads during BTA deep hole drilling', International Journal of Advanced Manufacturing Technology, 139, pp. 1595 - 1605, http://dx.doi.org/10.1007/s00170-025-15989-8

Back to profile page