ORCID as entered in ROS
https://orcid.org/0000-0003-1699-3687
Select Publications
Conference Papers
, 2020, 'Design and Characterization of Hydroxyapatite Scaffolds Fabricated by Stereolithography for Bone Tissue Engineering Application', in Procedia CIRP, pp. 170 - 175, http://dx.doi.org/10.1016/j.procir.2020.05.138
, 2019, 'Improvement of the surface tribological property of cutting tools through femtosecond laser surface texturing', in International Advancement in Ultraprocision Machining Process, Maebashi, Japan, presented at
, 2018, 'Influence of auxiliary gas on silicon carbide machining by femtosecond laser', in Proceedings of the 21st International Symposium on Advances in Abrasive Technology (ISAAT2018), Toronto, presented at
, 2018, '3D printing hydroxyapatite scaffold based on variable porosity for bone tissue engineering application', in Proceedings of the 13th Asia-Pacific Conference on Materials processing, Sydney, pp. 428 - 437, presented at
, 2018, 'A study on laser-assisted waterjet micromachining of single crystal silicon carbide by full factor experiment', in Proceedings of the 13th Asia-Pacific Conference on Materials processing, Sydney, pp. 329 - 338, presented at
, 2018, 'Cutting tool failure and reliability analysis during milling of compacted graphite iron by cemented carbide tool', in Proceedings of the 13th Asia-Pacific Conference on Materials processing, Sydney, pp. 90 - 99, presented at
, 2018, 'Experimental investigation on micro-milling of maraging steel 3J33B of different heat treatment conditions', in Proceedings of the 13th Asia-Pacific Conference on Materials processing, Sydney, pp. 107 - 116, presented at
, 2018, 'Relationships between the elastic recovery ratio and the load on two different alloys in indentation experiments', in Proceedings of the 13th Asia-Pacific Conference on Materials processing, Sydney, pp. 517 - 524, presented at
, 2018, 'Dressing of diamond grinding wheels with abrasive water jet for RB-SiC surface grinding', in ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology
, 2018, 'Dressing of diamond grinding wheels with abrasive water jet for RB-SiC surface grinding', in ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology
, 2018, 'Dressing of diamond grinding wheels with abrasive water jet for RB-SiC surface grinding', in ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology
, 2018, 'Influence of auxiliary gas on silicon carbide machining by femtosecond laser', in ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology
, 2018, 'Influence of auxiliary gas on silicon carbide machining by femtosecond laser', in ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology
, 2017, 'Prediction of surface roughness in precision quick point grinding of steel-based metal matrix composites', in Chen M (ed.), Proceedings of the 13th China-Japan International Conference on Ultra-precision Machining Process (CJUMP2017), Shanghai, China, pp. 209 - 215, presented at
, 2017, 'Physical properties of vegetable oils on the grinding performance and mechanisms in nano-particle jet MQL grinding of nickel based alloys', in Zhang F (ed.), Proceedings of the19th Conference on Abrasive Technology, Harbin, China, pp. 1 - 5, presented at
, 2017, 'An experimental study of the particle velocities in abrasive waterjets', in ISAAT 2017 - Proceedings of the 20th International Symposium on Advances in Abrasive Technology, pp. 578 - 585
, 2016, 'An experimental study of the radial-mode abrasive waterjet turning of alumina ceramics', in Proceedings of the 16th International Symposium on Advances in Abrasive Technology, KTH Royal Institute of Technology, Swden, Stockholm, Sweden, pp. 155 - 160, presented at
, 2016, 'Microstructure and formation process of gradient structure of self-diffusion composite tool materials', in International Journal of Nanomanufacturing, pp. 55 - 63, http://dx.doi.org/10.1504/IJNM.2016.076157
, 2015, 'A study of the interaction between abrasive waterjet and target by CFD and FEM method', in Proc of the 16th International Manufacturing Conference in China, Hangzhou, China, pp. 19 - 24, presented at
, 2015, 'The microstructure and formation process of gradient structure of self-diffusion gradient composite cutting tool materials', in Proc of the 16th International Manufacturing Conference in China (IMCC2015), Editorial Office of Chinese Journal of Mechanical Engineering, Hangzhou, China, pp. 1278 - 1284, presented at
, 2015, 'An Investigation of Hole Machining Process on a Carbon-fiber Reinforced Plastic Sheet by Abrasive Waterjet', in ISAAT (ed.), Trans Tech Publications, Jeju Island, Korea, pp. 113 - 118, presented at
, 2015, 'Predictive models for the geometrical characteristics of channels milled by abrasive waterjet', in Proc. of 2015 IEEE International Conference on Automation Science and Engineering, IEEE, Gothenburg, Sweden, pp. 1459 - 1464, presented at
, 2014, 'Micro-milling of Ti6Al4V: An Investigation on the Cutting Forces and Surface Integrity', in Brinksmeier E (ed.), Proceedings of the 4th International Conference on Nanomanufacturing (nanoMan2014), Breman, Germany, pp. E1-5, presented at
, 2014, 'Dressing of Diamond Grinding Wheels by Abrasive Water Jet for Freeform Optical Surface Grinding', in Yang L; Ruch E; Li S (eds.), Proceedings of SPIE - The International Society for Optical Engineering, Society of Photo-optical Instrumentation Engineers, Harbin, China, pp. 928108-1 - 928108-8, presented at
, 2014, 'High efficiency abrasive waterjet dressing of diamond grinding wheel', in Advanced Materials Research, pp. 243 - 248, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.243
, 2013, 'The Performance Evaluation and Application of Recycled Concrete in Constructions', in Zhang X; Zhang B; Jiang L; Xie M (eds.), CIVIL, STRUCTURAL AND ENVIRONMENTAL ENGINEERING, PTS 1-4, TRANS TECH PUBLICATIONS LTD, PEOPLES R CHINA, Shenzhen, pp. 127 - +, presented at
, 2010, 'Laser cleaning of fine particles on si-wafers', in AIP Conference Proceedings, Paris; France, pp. 1588 - 1593, presented at
, 2009, 'Heat absorbing model in laser drilling of hard-alloy sheet', in Proceedings of the 12th CIRP Conference on Modelling of Machining Operations - Volume 1, Mondragon University, Arrasate-Mondragon, Spain, presented at
, 2009, 'Predictive cutting force and torque models for the plane rake faced drill point design', in Proceedings of the 12th CIRP Conference on Modelling of Machining Operations - Volume 1, Mondragon University, Arrasate-Mondragon, Spain, presented at
, 2008, 'A plane rake faced drill point design for high drilling performance.', in Proceeding of the 8th International conference on Frontiers of Design and Manufacturing, Tianjin, China, presented at
, 2008, 'Modeling the erosion rate in micro abrasive air jet machining of glasses', in Proceeding of the 8th International conference on Frontiers of Design and Manufacturing, Tianjin, China, presented at
, 2008, 'Particle velocity models for ultra-high pressure abrasive waterjets', in Proceedings of the Eighth Asia-Pacific Conference on Materials Processing, Guilin-Guangzhou, China, presented at
, 2007, 'A new predictive model for the depth of cut in abrasive waterjet contouring of alumina ceramics', in Precision Grinding and Abrasive Technology, Dearborn, Michigan, USA, presented at
, 2007, 'Two dimensional simulation for gas-solid-liquid three-phase flow of abrasive water jet nozzle and experimental validation.', in Precision Grinding and Abrasive Technology, Dearborn, Michigan, USA, presented at
, 2006, 'Simulation for the outside velocityfield of abrasive water jet nozzle with different geometry', in Current Development in Abrasive Technology, Dalian, China, presented at
, 2006, 'A study of the process of vibration-erosion for adorning polishing', in Advances in Abrasive Machining and Surfacing Technologies, Dalian, China, presented at
, 2006, 'A study of laser surface modification for GCr 15 steel', in Gao H; Wang J; Jin Z; Guo DM (eds.), ADVANCES IN ABRASIVE MACHINING AND SURFACING TECHNOLOGIES, PROCEEDINGS, FRONTIERS DESIGN MANUFACTURING, PEOPLES R CHINA, Dalian, pp. 615 - +, presented at
, 2006, 'Machinability of glass by abrasive waterjet', in Gao H; Wang J; Jin Z; Guo DM (eds.), ADVANCES IN ABRASIVE MACHINING AND SURFACING TECHNOLOGIES, PROCEEDINGS, FRONTIERS DESIGN MANUFACTURING, PEOPLES R CHINA, Dalian, pp. 713 - +, presented at
, 2006, 'A study on surface quality of Al2O3 ceramics milled with abrasive waterjet technology', in Advances in Manufacturing Engineering, Xi`an, China, presented at
, 2006, 'Abrasive waterjet machining mechanisms of brittle materials considering material microstructure flaws', in Advances in Manufacturing Engineering, Xi`an, China, presented at
, 2006, 'Microstructure and mechanical properties of TiB2, matrix ceramic tool materials by low temperature sintering technology', in Advances in Manufacturing Engineering, Xi`an, China, presented at
, 2006, 'Study on multi-scale and multi-phase nanocomposite ceramic tools and cutting performance', in Advanced Design and Manufacturing for Sustainable Development, Guangzhou, China, presented at
, 2006, 'Study on mechanical properties of multi-scale and multi-phase nanocomposite ceramic tool materials', in Proceedings of the International Conference on Manufacturing Science and Engineering, http://www.scopus.com/inward/record.url?eid=2-s2.0-33751262622&partnerID=40&md5=5a99508bf904255615d4ac7f2c3f0c70
, 2004, 'Collaborative evaluation of engineering design concepts on the web', in CSCWD 2004 - 8th International Conference on Computer Supported Cooperative Work in Design - Proceedings, pp. 224 - 229, http://www.scopus.com/inward/record.url?eid=2-s2.0-15544376774&partnerID=40&md5=ea07ecaca1494b20666f090c4253c59f
, 2004, 'Development of a Postgraduate engineering management program for the Asia-Pacific region', in IEEE International Engineering Management Conference, pp. 856 - 859, http://www.scopus.com/inward/record.url?eid=2-s2.0-17644398481&partnerID=40&md5=76dfd628a2d07a3aaf4f906e5c3da717
, 2003, 'Evaluating design concepts by ranking fuzzy numbers', in International Conference on Machine Learning and Cybernetics, pp. 2596 - 2600, http://www.scopus.com/inward/record.url?eid=2-s2.0-1542345430&partnerID=40&md5=af521fad7d6a13a318287962741b55a0
, 2003, 'Surface roughness and striation patterns vary with controlled vibration of the abrasive waterjet cutting nozzle', in Mechanics and Material Engineering for Science and Experiments, pp. 342 - 346, http://www.scopus.com/inward/record.url?eid=2-s2.0-0141963394&partnerID=40&md5=708f82ce298250e8a37b7d8b0a74e9d4
, 2002, 'Spray pyrolysis technique for fabrication of nano-sized spherical agglomerated oxide powders for batteries', in Ahn JH; Hahn YD (ed.), METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, TRANS TECH PUBLICATIONS LTD, SOUTH KOREA, SEOUL, pp. 325 - 330, presented at
, 2002, 'Enhancing the capability and performance of abrasive waterjet cutting technology by multipass operations', in Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing (ICFDM'2002), pp. 270 - 278, http://www.scopus.com/inward/record.url?eid=2-s2.0-0141428749&partnerID=40&md5=3ff0f55c1902a89f5dc78ec7df28f9b3
, 2002, 'Rapid development of spin cast zinc parts using rapid tooling technologies', in Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing (ICFDM'2002), pp. 355 - 359, http://www.scopus.com/inward/record.url?eid=2-s2.0-0141540389&partnerID=40&md5=ad524a963cdc5f2ce83511161a07ae9c
Filter by type
https://orcid.org/0000-0003-1699-3687