Site Maintenance will take place from 4:00 PM on 2024-04-29 to 9:00 AM on 2024-05-01.
Please do not make any content change during this time, otherwise all the changes will be lost.

Select Publications

Reports

Hagan PC; Li D, 2017, Performance of Cable Bolts Under Axial Loading Subjected to Varying Geotechnical Conditions, ACARP, UNSW Sydney

Canbulat I; Mo S; Zhang C; Hagan P; Oh J, 2016, Coal pillar design for highwall mining and geotechnical considerations in backfilling

Canbulat I; Zhang C; Hebblewhite B; Galvin J; Suorineni FT; Shen B; Gale W; Thomas R; Saydam S; Hagan P, 2016, SCOPING OF ACARP’S COAL BURST RESEARCH, ACARP, Australia

Hagan PC; Chen J; Saydam S; Mitra R; Hebblewhite B, 2015, Optimising the Selection of Fully Grouted Cable Bolts in Varying Geotechnical Environments, UNSW Mining Engineering, UNSW Sydney, http://www.acarp.com.au/abstracts.aspx?repId=C22010

Hagan PC, 2013, Rock cuttability, CERCHAR Abrasivity index and rock property assessment of roof strata, grout and coal for Gregory Crinum,

Hagan PC, 2013, Rock cuttability, CERCHAR Abrasivity index and rock property assessment of carboniferous sandstone for Gregory Crinum

Hagan PC, 2012, Rock cuttability assessment of sandstone from selected

Hagan PC, 2012, Cerchar abrasivity index assessment

Hagan P; Saydam S; Mitra R, 2012, A review of the operational capability of the new drift construction at Metropolitan Colliery, UNSW, Sydney

Hagan P, 2012, Rock cuttability assessment and CERCHAR abrasivity index assessment for RioTinto Coal, UNSW, Sydney

Hagan P, 2012, Rock cuttability assessment for Gujarat NRE Coking Coal Ltd, UNSW, Sydney

Hagan PC, 2011, Cerchar abrasivity index assessment

Hagan PC, 2011, Cerchar abrasivity index assessment

Hagan P, 2011, CERCHAR abrasivity index assessment for Coffey Geotechnics, UNSW, Sydney

Hagan P, 2011, Rock cuttability assessment and CERCHAR abrasivity index assessment for Cordeaux Colliery, UNSW, Sydney

Hagan P, 2011, Rock cuttability assessment and CERCHAR abrasivity index assessment for Rio Tinto Coal, UNSW, Sydney

Hagan P, 2011, Rock cuttability assessment for SCT Operations Pty Ltf, UNSW, Sydney

Hagan P, 2011, Variability in CERCHAR abrasivity of face strata along a longwall panel at Kestrel Mine, Queensland, UNSW, Sydney

Hagan P, 2010, CERCHAR abrasivity assessment for GHD Pty Ltd, UNSW, Sydney

Hagan P, 2010, CERCHAR abrasivity index assessment for Western Desert Resources Ltd, UNSW, Sydney

Hagan P, 2009, Rock cuttability assessment for Golder Associates Pty Ltd, UNSW, Sydney

Hagan P, 2009, Rock cuttability assessment of roof and floor rock for BHP Billiton Illawarra Coal, UNSW, Sydney

Hagan P, 2008, An assessment of the cuttability of core samples from the Roy Hill Iron Ore Project, UNSW, Sydney

Hagan PC, 2005, Assessment of the CD19X series boreholes, Carborough Downs, Seawave Mining Pty Ltd

Hagan P, 2004, A comparative assessment of pick wear using the AGE Mining designed tungsten carbide tip, UNSW, Sydney

Hagan PC, 2002, An assessment of the abrasiveness of rock core samples for the Mardi Dam project, Douglas Partners

Hagan PC, 2002, Cerchar abrasivity index: testing of selected rock samples for the Breakfast Creek microtunnel project, Douglas Partners

Hagan P, 2002, An assessment of the abrasiveness of samples of submarine mineral deposit for Nautilus Minerals Corp., UNSW, Sydney

Hagan P; Weckert S, 2002, Anchorage and failure mechanisms of fully encapsulated rockbolts - Stage 2. Interim Progress Report, UNSW Mining Research Centre, Sydney, 02/02

Hagan P, 2001, Results of core cuttability testing from the Eastern Freeway Project for VicRoads, UNSW, Sydney

Hagan PC, 2000, A review of methane-air ignition by ruptured roofbolts and cable bolts, ANI Arnall

Hagan P, 1998, Development and implementation of the HI One Mine System from resource definition to railout - End-of-Project Review, Hamersley Iron Pty Ltd, Perth, Western Australia, One Mine System

Hagan PC, 1996, Increasing resource value by enhancing selective mining, Hamersley Iron

Hagan P, 1993, Reduced blasthole drilling costs using high-pressure water jets - fifth quarterly report, CRA Advanced Technical Development, Perth, Western Australia, Reduced blasthole drilling costs, 5th

Hagan P, 1992, Reduced blasthole drilling costs using high-pressure water jets - first quarterly report, CRA Advanced Technical Development, Perth, Western Australia, Reduced blasthole drilling costs, 1

Hagan PC; Roxborough FF, 1990, The cuttability of core samples BH22 and BH30, Hollingsworth Dames and Moore Pty Ltd

Roxborough FF; Hagan PC, 1990, The cuttability of core samples from the Park Street Tunnel, Coffey Partners International

Hagan P, 1990, Cross-site comparison of LHD units at Pasminco's Broken Hill and Elura operations based on TQM principles, Key Centre for Mines, Sydney

Hagan PC; Roxborough FF, 1989, The cuttability of coal from Newlands mine, ACIRL

Hagan PC; Roxborough FF, 1989, The cuttability of a core sample of Brisbane Tuff, Hollingsworth Consultants

Hagan PC; Roxborough FF, 1989, The cuttability of riser tap rock core samples, Coffey and Partners

Roxborough FF; Hagan P, 1989, A comparison of the coal cutting performance of continuous miner cutter picks for Coal Cliff Collieries Pty Ltd, UNSW, Sydney

Roxborough FF; Hagan P, 1989, A comparison of the coal cutting performance of two types of continuous miner cutter picks, UNSW, Sydney

Roxborough FF; Hagan P, 1989, An assessment of the cuttability of iron ore samples from Tom Price mine, Western Australia, for Wirtgen Australia, UNSW, Sydney

Roxborough FF; Hagan P, 1989, An assessment of the cuttability of rock core samples from Gordonstone Mine, Emerald, Queensland, UNSW, Sydney

Roxborough FF; Hagan P, 1989, An assessment of the cuttability of solar salt for Dampier Salt Operations Pty Ltd, UNSW, Sydney

Hagan P, 1989, An assessment of the effect of cleat orientation on the cutting characteristics of coal samples from Western 2 Colliery, NSW, UNSW, Sydney

Roxborough FF; Hagan P, 1989, Cuttability assessment of rock samples from the Malabar Outfall Tunnel, UNSW, Sydney

Hagan PC, 1988, The cuttability of coal samples from Moonee Colliery, Dames & Moore

Roxborough FF; Hagan P, 1988, The cuttability of rock samples from the Burwood Beach Tunnel, UNSW, Sydney


Back to profile page