Select Publications
Conference Papers
2012, 'Experimental investigation of flat plate self-noise reduction using trailing edge serrations', in 28th Congress of the International Council of the Aeronautical Sciences 2012, ICAS 2012, pp. 1022 - 1031
,2012, 'Flow visualisation of three-dimensional effects in a cavity flow', in Proceedings of the 18th Australasian Fluid Mechanics Conference, AFMC 2012
,2012, 'On the generation of airfoil tonal noise at zero angle of attack and low to moderate Reynolds number', in 18th AIAA/CEAS Aeroacoustics Conference (33rd AIAA Aeroacoustics Conference), http://dx.doi.org/10.2514/6.2012-2060
,2012, 'On the noise reduction mechanism of a flat plate serrated trailing edge at low-to-moderate Reynolds number', in 18th AIAA/CEAS Aeroacoustics Conference (33rd AIAA Aeroacoustics Conference), http://dx.doi.org/10.2514/6.2012-2186
,2012, 'Vortex shedding and tonal noise from a sharp bevelled trailing edge', in 50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, http://dx.doi.org/10.2514/6.2012-68
,2011, 'Aeolian tones generated by a square cylinder with a detached flat plate', in 17th AIAA/CEAS Aeroacoustics Conference 2011 (32nd AIAA Aeroacoustics Conference)
,2011, 'Aeroacoustic effects of a cylinder/plate-configuration', in 17th AIAA/CEAS Aeroacoustics Conference 2011 (32nd AIAA Aeroacoustics Conference)
,2011, 'Airfoil trailing edge noise source location at low to moderate reynolds number', in 17th AIAA/CEAS Aeroacoustics Conference 2011 (32nd AIAA Aeroacoustics Conference)
,2011, 'Analysis of noise generated by a wall mounted finite-length airfoil', in Australian Acoustical SocietyConference 2011, Acoustics 2011: Breaking New Ground, pp. 386 - 393
,2011, 'Empirical study of the tonal noise radiated by a sharp-edged flat plate at low-to-moderate Reynolds number', in Australian Acoustical SocietyConference 2011, Acoustics 2011: Breaking New Ground, pp. 379 - 385
,2011, 'Flat plate self-noise reduction at low-to-moderate Reynolds number with trailing edge serrations', in Australian Acoustical SocietyConference 2011, Acoustics 2011: Breaking New Ground, pp. 371 - 378
,2011, 'Hypersonic inlet Research for small earth-to-orbit vehicles propelled by laser beams', in 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit 2011
,2011, 'Turbulent trailing edge noise estimation using a RANS-based statistical noise model', in Australian Acoustical SocietyConference 2011, Acoustics 2011: Breaking New Ground, pp. 358 - 362
,2011, 'Wind turbine noise mechanisms and some concepts for its control', in Australian Acoustical SocietyConference 2011, Acoustics 2011: Breaking New Ground, pp. 494 - 500
,2011, 'Hypersonic inlet for a laser powered propulsion system', in AIP Conference Proceedings, pp. 145 - 157, http://dx.doi.org/10.1063/1.3657023
,2011, 'Aeolian tones generated by a square cylinder with a detached flat plate', in 17th AIAA/CEAS Aeroacoustics Conference (32nd AIAA Aeroacoustics Conference), American Institute of Aeronautics and Astronautics, presented at 17th AIAA/CEAS Aeroacoustics Conference (32nd AIAA Aeroacoustics Conference), http://dx.doi.org/10.2514/6.2011-2779
,2011, 'Aeroacoustic beamforming for airfoil trailing edge tonal noise sources.', in The Journal of the Acoustical Society of America, Acoustical Society of America (ASA), pp. 2584 - 2584, http://dx.doi.org/10.1121/1.3588545
,2011, 'Empirical study of flat plate trailing edge flow and noise', Melbourne, Australia, presented at 3rd Asia Pacific Symposium on Aerospace Technology, APISAT 2011, Melbourne, Australia, 28 February 2011 - 03 March 2011
,2011, 'A modification to logarithmic spiral beamforming arrays for aeroacoustic applications', in 17th AIAA/CEAS Aeroacoustics Conference 2011 (32nd AIAA Aeroacoustics Conference), http://dx.doi.org/10.2514/6.2011-2720
,2011, 'Aeroacoustic effects of a cylinder/plate-configuration', in 17th AIAA/CEAS Aeroacoustics Conference 2011 (32nd AIAA Aeroacoustics Conference), http://dx.doi.org/10.2514/6.2011-2813
,2011, 'Experimental investigation of broadband trailing edge noise from sharp-edged struts', in 17th AIAA/CEAS Aeroacoustics Conference 2011 (32nd AIAA Aeroacoustics Conference), http://dx.doi.org/10.2514/6.2011-2732
,2011, 'Minimization of trailing edge noise by parametric airfoil shape modifications', in 17th AIAA/CEAS Aeroacoustics Conference 2011 (32nd AIAA Aeroacoustics Conference), http://dx.doi.org/10.2514/6.2011-2782
,2010, 'Acoustic analysis of flat plate trailing edge noise', in 20th International Congress on Acoustics 2010, ICA 2010 - Incorporating Proceedings of the 2010 Annual Conference of the Australian Acoustical Society, pp. 210 - 217
,2010, 'Aeolian tones generated by a square cylinder with a splitter plate', in 20th International Congress on Acoustics 2010, ICA 2010 - Incorporating Proceedings of the 2010 Annual Conference of the Australian Acoustical Society, pp. 135 - 142
,2010, 'Design and calibration of a small aeroacoustic beamformer', in 20th International Congress on Acoustics 2010, ICA 2010 - Incorporating Proceedings of the 2010 Annual Conference of the Australian Acoustical Society, pp. 143 - 150
,2010, 'Flow around a square cylinder with a detached downstream flat plate at a low Reynolds number', in 17th Australasian Fluid Mechanics Conference 2010, pp. 308 - 311
,2010, 'Rectangular and modified two-dimensional cavities in an open-jet anechoic wind tunnel at low Mach number', in 17th Australasian Fluid Mechanics Conference 2010, pp. 832 - 835
,2010, 'Statistical estimation of turbulent trailing edge noise', in 20th International Congress on Acoustics 2010, ICA 2010 - Incorporating Proceedings of the 2010 Annual Conference of the Australian Acoustical Society, pp. 162 - 170
,2010, 'The flow and noise generated by a sharp trailing edge', in 17th Australasian Fluid Mechanics Conference 2010, pp. 749 - 752
,2010, 'Flow and noise predictions for a tandem cylinder configuration using novel hybrid RANS/LES approaches', in 16th AIAA/CEAS Aeroacoustics Conference (31st AIAA Aeroacoustics Conference), http://dx.doi.org/10.2514/6.2010-3787
,2010, 'Reduction of flow induced tonal noise through leading edge tubercle modifications', in 16th AIAA/CEAS Aeroacoustics Conference (31st AIAA Aeroacoustics Conference), http://dx.doi.org/10.2514/6.2010-3700
,2009, 'Aeroacoustic simulation of bluff body noise using a hybrid statistical method', in Annual Conference of the Australian Acoustical Society 2009 - Acoustics 2009: Research to Consulting, pp. 61 - 67
,2009, 'Airfoil noise measurements at various angles of attack and low Reynolds number', in Annual Conference of the Australian Acoustical Society 2009 - Acoustics 2009: Research to Consulting, pp. 68 - 75
,2009, 'Flow and Noise simulation of the NASA Tandem Cylinder experiment using OpenFOAM', in 15th AIAA/CEAS Aeroacoustics Conference (30th AIAA Aeroacoustics Conference), http://dx.doi.org/10.2514/6.2009-3157
,2008, 'A mixed H
2008, 'A quasi-one-dimensional mixing and combustion code for trajectory optimisation and design studies', in 15th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, http://dx.doi.org/10.2514/6.2008-2603
,2007, 'An anechoic wind tunnel for the investigation of the main-rotor/tail-rotor blade vortex interaction', in American Helicopter Society International - 6th Australian Pacific Vertiflite Conference on Helicopter Technology and International Helicopter Safety Team South Pacific Regional Conference 2007, pp. 3 - 12
,2007, 'Derivative free global optimisation of CFD simulations', in Proceedings of the 16th Australasian Fluid Mechanics Conference, 16AFMC, pp. 1432 - 1435
,2007, 'Development and validation of a small-scale anechoic wind tunnel', in 14th International Congress on Sound and Vibration 2007, ICSV 2007, pp. 556 - 563
,2007, 'Numerical simulation of a blunt airfoil wake', in Proceedings of the 16th Australasian Fluid Mechanics Conference, 16AFMC, pp. 1095 - 1101
,2007, 'Quasi-one-dimensional modeling of hydrogen fuelled scramjet combustors', in Collection of Technical Papers - 18th AIAA Computational Fluid Dynamics Conference, pp. 1325 - 1337
,2007, 'Numerical evaluation and optimization of low speed wind tunnel contractions', in Collection of Technical Papers - 18th AIAA Computational Fluid Dynamics Conference, pp. 71 - 85, http://dx.doi.org/10.2514/6.2007-3827
,2006, 'An air-launched hypersonic vehicle performance model', in Collection of Technical Papers - 44th AIAA Aerospace Sciences Meeting, pp. 2684 - 2693
,2006, 'Orbital payload delivery using hydrogen and hydrocarbon fuelled scramjet engines', in IEEE Aerospace Conference Proceedings
,2006, 'Orbital payload delivery using hydrogen and hydrocarbon fuelled scramjet engines', in 2006 IEEE AEROSPACE CONFERENCE, VOLS 1-9, IEEE, MT, Big Sky, pp. 4500 - +, presented at 2006 IEEE Aerospace Conference, MT, Big Sky, 04 March 2006 - 11 March 2006, https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000241583108008&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
,2006, 'Preliminary investigation of sound generation in scramjets', in Proceedings of the 20th Australasian Fluid Mechanics Conference, AFMC 2016
,2005, 'A Supersonic Combustion Model for Scramjet Vehicle Performance Studies', in 5th Asia-Pacific Conference on Combustion
,2003, 'An induction parameter model for shock ignition in energetic materials', in Proceedings [and abstracts] of the 2003 Australian Symposium on Combustion & the Eighth Australian Flame Days, Monash University, Melbourne, presented at 2003 Australian Symposium on Combustion & the Eighth Australian Flame Days, Monash University, Melbourne, 08 December 2003 - 09 December 2003
,2002, 'Solid Rocket Motor Cookoff Modelling for Magazine Fire Hazards', in Australian Symposium on Combustion (2002: Adelaide, S. Aust.) Australian Flame Days (7th: 2002: Adelaide, S. Aust.)
,2001, 'Hydrocarbon Fuelled Pulse Detonation Engine Analysis', Adelaide, Australia, presented at 14th Australasian Fluid Mechanics Conference, Adelaide, Australia, 10 December 2001 - 14 December 2001
,