Select Publications
Conference Papers
2020, 'Comparative Analysis of Different Halbach Array Structures in the Design Optimization of an In-wheel Permanent Magnet Machine for Land Speed Racing', in ECCE 2020 - IEEE Energy Conversion Congress and Exposition, pp. 1800 - 1805, http://dx.doi.org/10.1109/ECCE44975.2020.9235827
,2019, 'Predictive Load Voltage Control for Four-leg Inverter with Fixed Switching Frequency', in 2019 9th International Conference on Power and Energy Systems, ICPES 2019, http://dx.doi.org/10.1109/ICPES47639.2019.9105482
,2019, 'Capacitor-Less Bidirectional Synchronous Buck-Boost Converter for Vanadium Redox Flow Battery', in 2019 29th Australasian Universities Power Engineering Conference (AUPEC), Nadi, Fiji, presented at Australasian Universities Power Engineering Conference (AUPEC-2019), Nadi, Fiji, 26 November 2019 - 29 November 2019
,2019, 'Current Sensor-less Predictive Load Voltage Control for Four-leg Inverter with LC Output Filter', in 2019 29th Australasian Universities Power Engineering Conference (AUPEC), Nadi, Fiji, presented at Australasian Universities Power Engineering Conference (AUPEC-2019), Nadi, Fiji, 26 November 2019 - 29 November 2019, http://dx.doi.org/10.1109/AUPEC48547.2019.211835
,2019, 'Sensorless control and on-line estimation of inductances of IPMSMs using current derivatives', in 2019 IEEE Vehicle Power and Propulsion Conference, VPPC 2019 - Proceedings, http://dx.doi.org/10.1109/VPPC46532.2019.8952498
,2019, 'A new mechanical-strength-oriented rotor parametric model design for the optimization of a very-high-speed IPMSM', in 2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019, pp. 6092 - 6098, http://dx.doi.org/10.1109/ECCE.2019.8912980
,2019, 'An improved modulated model predictive torque and flux control for high-speed IPMSM drives', in 2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019, pp. 6601 - 6607, http://dx.doi.org/10.1109/ECCE.2019.8913018
,2019, 'A New on-Line Parameters Identification Method for IPMSMs Using Current Derivative Measurement', in ICPE 2019 - ECCE Asia - 10th International Conference on Power Electronics - ECCE Asia, Busan, Korea (South), Korea (South), pp. 569 - 575, presented at ICPE 2019 - ECCE Asia, Busan, Korea (South), Korea (South), 27 May 2019 - 30 May 2019
,2019, 'An Analytical Approach to Direct Torque and Flux Control of Interior Permanent Magnet Synchronous Machine for Deep Field Weakening Without Using Pre-calculated Lookup Tables', in ICPE 2019 - ECCE Asia - 10th International Conference on Power Electronics - ECCE Asia, Busan, Korea, pp. 3196 - 3202, presented at ICPE, Busan, Korea, 27 May 2019 - 30 May 2019
,2018, 'Analytical Calculation of Maximum Mechanical Stress on the Rotor of the Interior Permanent-Magnet Synchronous Machine', in 2018 IEEE Energy Conversion Congress and Exposition, ECCE 2018, pp. 255 - 261, http://dx.doi.org/10.1109/ECCE.2018.8557418
,2018, 'Design Optimization of a Spoke-Type FSCW IPM Machine to Achieve Low Torque Ripple and High Torque Density under a Wide Constant Power Speed Range', in 2018 IEEE Energy Conversion Congress and Exposition, ECCE 2018, pp. 6914 - 6921, http://dx.doi.org/10.1109/ECCE.2018.8558066
,2018, 'Hybrid Sensorless Control of an Interior Permanent Magnet Synchronous Machine using Current Derivative Measurements and a Sliding Mode Observer', in 2018 IEEE Energy Conversion Congress and Exposition, ECCE 2018, pp. 344 - 351, http://dx.doi.org/10.1109/ECCE.2018.8558295
,2018, 'Lyapunov-Function Based Predictive Approach for Load Voltage Control of Four-Leg Inverter with an Output LC filter', in 2018 IEEE Energy Conversion Congress and Exposition, ECCE 2018, pp. 6880 - 6885, http://dx.doi.org/10.1109/ECCE.2018.8557385
,2018, 'Model-Predictive Flux Control of 3L-NPC Fed Induction Motor Drives with Stator Flux Error Based Two-Stage Optimization', in 2018 IEEE Energy Conversion Congress and Exposition, ECCE 2018, pp. 5450 - 5457, http://dx.doi.org/10.1109/ECCE.2018.8557787
,2018, 'Investigation of the Stress Concentration Factor for Estimating Maximum Mechanical Stress of Interior Permanent-Magnet Machines', in Proceedings - 2018 23rd International Conference on Electrical Machines, ICEM 2018, pp. 798 - 804, http://dx.doi.org/10.1109/ICELMACH.2018.8507225
,2018, 'Sensorless Position Estimation, Parameter Identification and Control Integration for Permanent Magnet Synchronous Machines using Current Derivative Measurements', in 2018 International Power Electronics Conference, IPEC-Niigata - ECCE Asia 2018, pp. 4174 - 4180, http://dx.doi.org/10.23919/IPEC.2018.8507505
,2018, 'Two-Stage Optimization Based Predictive Torque Control with Reduced Complexity for a Three-Level Inverter Driven Induction Motor', in 2018 International Power Electronics Conference, IPEC-Niigata - ECCE Asia 2018, pp. 3971 - 3978, http://dx.doi.org/10.23919/IPEC.2018.8507479
,2018, 'Position Sensorless Control of an Interior Permanent Magnet Synchronous Machine (IPMSM) in Deep Flux-weakening Region', in 2018 IEEE 9th International Symposium on Sensorless Control for Electrical Drives, SLED 2018, pp. 114 - 119, http://dx.doi.org/10.1109/SLED.2018.8486136
,2018, 'Sensorless Control of Interior Permanent Magnet Synchronous Machines Based on the Combination of the Modified FPE Method and SMO', in 2018 IEEE 9th International Symposium on Sensorless Control for Electrical Drives, SLED 2018, pp. 126 - 131, http://dx.doi.org/10.1109/SLED.2018.8485918
,2018, 'Charging Control of Vanadium Redox Battery Based Energy Storage Systems with Variable Input Power', Cairns, Australia, presented at 27th International Symposium on Industrial Electronics (ISIE), Cairns, Australia, 13 June 2018 - 15 June 2018
,2018, 'A two-stage optimal vector selection method for predictive torque control of a three-level VSI driven induction motor', in 2017 Australasian Universities Power Engineering Conference, AUPEC 2017, pp. 1 - 6, http://dx.doi.org/10.1109/AUPEC.2017.8282436
,2018, 'Simplified finite control set model predictive control (FCS-MPC) with extended voltage vectors for grid connected converters', in 2017 Australasian Universities Power Engineering Conference, AUPEC 2017, pp. 1 - 6, http://dx.doi.org/10.1109/AUPEC.2017.8282435
,2017, 'Challenges of considering saliency ratio in design optimization of IPM machines', in Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, pp. 1828 - 1833, http://dx.doi.org/10.1109/IECON.2017.8216309
,2017, 'Current derivative estimation by using AMR current sensor and its application in sensorless control of an IPMSM drive', in 2017 IEEE Energy Conversion Congress and Exposition, ECCE 2017, Cincinnati, OH, USA, pp. 1901 - 1908, presented at 2017 IEEE Energy Conversion Congress and Exposition (ECCE), Cincinnati, OH, USA, 01 October 2017 - 05 October 2017, http://dx.doi.org/10.1109/ECCE.2017.8096027
,2017, 'Preliminary study on differences in the performance characteristics of concentrated and distributed winding IPM machines with different rotor topologies', in 2017 IEEE Energy Conversion Congress and Exposition, ECCE 2017, Cincinnati, OH, USA, pp. 3565 - 3570, presented at 2017 IEEE Energy Conversion Congress and Exposition (ECCE), Cincinnati, OH, USA, 01 October 2017 - 05 October 2017, http://dx.doi.org/10.1109/ECCE.2017.8096634
,2017, 'Deep flux weakening control with six-step overmodulation for a segmented interior permanent magnet synchronous motor', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, Australia, 11 August 2017 - 14 August 2017, http://dx.doi.org/10.1109/ICEMS.2017.8056517
,2017, 'Direct torque and flux control of a fractional-slot concentrated-winding IPMSM in deep flux-weakening region', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, Australia, 11 August 2017 - 14 August 2017, http://dx.doi.org/10.1109/ICEMS.2017.8056372
,2017, 'Multi-cell DC-DC converter based solid-state transformer (SST) design featuring medium-voltage grid-tie application', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, Australia, 11 August 2017 - 14 August 2017, http://dx.doi.org/10.1109/ICEMS.2017.8056068
,2017, 'Online estimation of inductances of permanent magnet synchronous machines based on current derivative measurements', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, Australia, 11 August 2017 - 14 August 2017, http://dx.doi.org/10.1109/ICEMS.2017.8056510
,2017, 'Sensorless control interior permanent-magnet synchronous motor drive over wide speed range operation based on the current derivative method', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, Australia, 11 August 2017 - 14 August 2017, http://dx.doi.org/10.1109/ICEMS.2017.8056511
,2017, 'Tradeoffs in high-speed performance characteristics in optimization of saliency ratio and efficiency for designing FSCW IPM machines', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sydney, NSW, Australia, 11 August 2017 - 14 August 2017, http://dx.doi.org/10.1109/ICEMS.2017.8056386
,2017, 'Optimization of LCL filter and controller parameters for grid-connected converter adopting differential evolution (DE) algorithm', in Proceedings of the International Conference on Power Electronics and Drive Systems, pp. 233 - 237, http://dx.doi.org/10.1109/PEDS.2017.8289294
,2017, 'Challenges for including characteristic current as a design parameter in optimization of IPM machines', in 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017, Miami, FL, USA, presented at 2017 IEEE International Electric Machines and Drives Conference (IEMDC), Miami, FL, USA, 21 May 2017 - 24 May 2017, http://dx.doi.org/10.1109/IEMDC.2017.8002184
,2017, 'Verification of a novel voltage control strategy for MTPV control of a fractional-slot concentrated-winding IPMSM', in 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017, Miami, FL, USA, presented at 2017 IEEE International Electric Machines and Drives Conference (IEMDC), Miami, FL, USA, 21 May 2017 - 24 May 2017, http://dx.doi.org/10.1109/IEMDC.2017.8001867
,2017, 'Analysis of low-speed IPMMs with distributed and fractional slot concentrated windings designed for wind energy applications', in 2017 IEEE International Magnetics Conference, INTERMAG 2017, Dublin, Ireland, presented at 2017 IEEE International Magnetics Conference (INTERMAG), Dublin, Ireland, 24 April 2017 - 28 April 2017, http://dx.doi.org/10.1109/INTMAG.2017.8008036
,2016, 'A position sensorless model predictive duty cycle controller for an IPMSM over wide speed range using current derivative measurements', in 2016 IEEE 2nd Annual Southern Power Electronics Conference, SPEC 2016, IEEE, Auckland, New Zealand, presented at IEEE Annual Southern Power Electronics Conference (SPEC), Auckland, New Zealand, 05 December 2016 - 08 December 2016, http://dx.doi.org/10.1109/SPEC.2016.7846109
,2016, 'Analysis of a cascaded high-boost non-isolated DC-DC converter with bidirectional power flow', in 2016 IEEE 2nd Annual Southern Power Electronics Conference, SPEC 2016, IEEE, Auckland, New Zealand, presented at IEEE Annual Southern Power Electronics Conference (SPEC), Auckland, New Zealand, 05 December 2016 - 08 December 2016, http://dx.doi.org/10.1109/SPEC.2016.7846184
,2016, 'Evaluation of an FPGA current derivative measurement system for the fundamental PWM excitation sensorless method for IPMSM', in Power Electronics Conference (SPEC), IEEE Annual Southern, IEEE, Auckland, New Zealand, pp. 1 - 3, presented at IEEE Annual Southern Power Electronics Conference (SPEC), Auckland, New Zealand, 05 December 2016 - 08 December 2016, http://dx.doi.org/10.1109/SPEC.2016.7846196
,2016, 'Design of a bi-directional DC-DC converter for Solid-State Transformer(SST) application by exploiting the shoot through mode', in Sustainable Energy Technologies (ICSET), 2016 IEEE International Conference on, IEEE, Hanoi, Vietnam, pp. 276 - 281, presented at 2016 IEEE International Conference on Sustainable Energy Technologies (ICSET), Hanoi, Vietnam, 14 November 2016 - 16 November 2016, http://dx.doi.org/10.1109/ICSET.2016.7811795
,2016, 'Converters with high boost, energy storage and bi-directional power flow in energy systems', in IEEE International Conference on Sustainable Energy Technologies, ICSET, Institute of Electrical and Electronics Engineers (IEEE), VIETNAM, Hanoi, pp. 108 - 113, presented at 2016 IEEE International Conference on Sustainable Energy Technologies (ICSET), VIETNAM, Hanoi, 14 November 2016 - 16 November 2016, http://dx.doi.org/10.1109/ICSET.2016.7811765
,2016, 'Performance comparison of two FPE sensorless control methods on a direct torque controlled interior permanent magnet synchronous motor drive', in 19th International Conference on Electrical Machines and Systems, ICEMS 2016, IEEE, Tokyo, Japan, presented at 2016 19th International Conference on Electrical Machines and Systems (ICEMS), Tokyo, Japan, 13 November 2016 - 16 November 2016, http://ieeexplore.ieee.org/document/7837189/
,2016, 'Sensorless control of interior permanent magnet synchronous motor based on the fundamental pulse width modulation excitation over a wide speed range', in 19th International Conference on Electrical Machines and Systems, ICEMS 2016, IEEE, Tokyo, Japan, presented at 2016 19th International Conference on Electrical Machines and Systems (ICEMS), Tokyo, Japan, 13 November 2016 - 16 November 2016, http://ieeexplore.ieee.org/document/7837432/
,2016, 'A modified single-current-regulator control scheme for deep flux-weakening operation of interior permanent magnet synchronous motors', in IECON Proceedings (Industrial Electronics Conference), IEEE, Florence, Italy, pp. 2624 - 2629, presented at IECON 2016 - 42nd Annual Conference, Florence, Italy, 23 October 2016 - 26 October 2016, http://dx.doi.org/10.1109/IECON.2016.7793424
,2016, 'Design and comprehensive modelling of solid-state transformer(SST) based substation', in 2016 IEEE International Conference on Power System Technology, POWERCON 2016, Wollongong, NSW, Australia, presented at 2016 IEEE International Conference on Power System Technology (POWERCON), Wollongong, NSW, Australia, 28 September 2016 - 01 October 2016, http://dx.doi.org/10.1109/POWERCON.2016.7753914
,2016, 'Detailed analytical modelling of fractional-slot concentrated-wound interior permanent magnet machines for prediction of torque ripple', in Energy Conversion Congress and Exposition (ECCE), 2016 IEEE, IEEE, Milwaukee, WI, pp. 1 - 8, presented at 2016 IEEE Energy Conversion Congress and Exposition (ECCE), Milwaukee, WI, 18 September 2016 - 22 September 2016, http://dx.doi.org/10.1109/ECCE.2016.7855035
,2016, 'Performance investigation of selected prediction vectors based FS-PTC for 3L-NPC inverter fed motor drive', in ECCE 2016 - IEEE Energy Conversion Congress and Exposition, Proceedings, IEEE, Milwaukee, WI, presented at 2016 IEEE Energy Conversion Congress and Exposition (ECCE), Milwaukee, WI, 18 September 2016 - 22 September 2016, http://dx.doi.org/10.1109/ECCE.2016.7855345
,2016, 'An extended dq model for concentrated-wound interior permanent magnet machines considering non-ideal machine parameters', in IET Conference Publications, Institution of Engineering and Technology (IET), Glasgow, UK, pp. 6 .-6 ., presented at 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016), Glasgow, UK, 19 April 2016 - 21 April 2016, http://dx.doi.org/10.1049/cp.2016.0180
,2016, 'Effects of the switching frequency of a grid converter on the LCL filter design', in IET Conference Publications, http://dx.doi.org/10.1049/cp.2016.0206
,2016, 'Operation along the maximum torque per voltage trajectory in a direct torque and flux controlled interior permanent magnet synchronous motor', in IET Conference Publications, Institution of Engineering and Technology (IET), pp. 6 .-6 ., presented at 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016), http://dx.doi.org/10.1049/cp.2016.0326
,2015, 'Study on medium-frequency transformer isolated substation', in Asia-Pacific Power and Energy Engineering Conference, APPEEC, Brisbane, Queensland, Australia., presented at IEEE PES Asia-Pacific Power and Energy Engineering Conference 2015 (IEEE PES APPEEC 2015), Brisbane, Queensland, Australia., 15 November 2015 - 18 November 2015, http://dx.doi.org/10.1109/APPEEC.2015.7381055
,