By Professor Faz Rahman

Conference Papers

Chong GL; Dutta R; Rahman MF, 2010, 'Design of a Highly Efficient 1kW IPM Machine with a Very Wide Constant Power Speed Range', in Proceedings of International Power Electronics Conference -ECCE-Asia (IPEC),, IEEE, Japan, pp. 1956 - 1961, presented at International Power Electronics Conference -ECCE-Asia (IPEC), Japan, 21 June 2010 - 24 June 2010, http://ieeexplore.ieee.org/Xplore/dynhome.jsp

Rahman MF; Xiao D, 2010, 'Implementation of sensorless direct torque control using matrix converter fed Interior Permanent Magnet Synchronous Motor', in The Institute of Electrical Engineers of Japan, IEEE, Japan, pp. 3065 - 3071, presented at Proceeding of the International Power Electronics Conference (IPEC), Hokkaido, Japan, 21 June 2010 - 24 June 2010

Chong GL; Dutta R; Rahman MF, 2010, 'A Comparative Study of Rotor Losses in an IPM with Single and Double Layer Concentrated Windings', in Proceedings of International Conference on Electrical Machines and Systems (ICEMS), IEEE, Korea, presented at International Conference on Electrical Machines and Systems (ICEMS), Korea

Rahman MA; Zhou P; Lin D; Rahman MF, 2009, 'Measurement of parameters for interior permanent magnet motors', in 2009 IEEE Power and Energy Society General Meeting, PES '09, http://dx.doi.org/10.1109/PES.2009.5275584

Xiao D; Rahman F, 2009, 'A modified DTC for matrix converter drives using two switching configurations', in 2009 13th European Conference on Power Electronics and Applications, EPE '09

Xiao D; Rahman F, 2009, 'An improved DTC for matrix converter drives using multi-mode ISVM and unity input power factor correction', in 2009 13th European Conference on Power Electronics and Applications, EPE '09

Foo G; Goon CS; Rahman MF, 2009, 'Analysis and design of the SVM direct torque and flux controlled IPM synchronous motor drive', in AUPEC'09 - 19th Australasian Universities Power Engineering Conference: Sustainable Energy Technologies and Systems

Foo G; Rahman MF, 2009, 'Direct torque and flux controlled IPM synchronous motor drive using a hybrid signal injection and adaptive sliding mode observer', in IEEE Region 10 Annual International Conference, Proceedings/TENCON, http://dx.doi.org/10.1109/TENCON.2009.5396027

You K; Rahman F, 2009, 'Over-voltage protection using power Zener diode for matrix converter and matrix-Z-source converter', in Proceedings of the International Conference on Power Electronics and Drive Systems, pp. 193 - 197, http://dx.doi.org/10.1109/PEDS.2009.5385725

Foo G; Rahman MF, 2009, 'Wide-speed direct torque and flux controlled interior permanent-magnet synchronous motor drive using a combined adaptive sliding-mode observer and high-frequency signal injection', in 2009 8th International Symposium on Advanced Electromechanical Motion Systems and Electric Drives Joint Symposium, ELECTROMOTION 2009, http://dx.doi.org/10.1109/ELECTROMOTION.2009.5259125

Rahman MF; Foo GH, 2009, 'An Extended Rotor Flux Model for Sensorless Direct Torque and Flux Controlled IPM Synchronous Motor Drives', IEEE, Singapore, presented at 29th IEEE International conference on Electrical and Electronic Technology, Singapore, 23 November 2009 - 26 November 2009

Rahman MF; Foo GH, 2009, 'A Hybrid Signal Injection and Sliding Mode Observer for Direct Torque and Flux Controlled IPMSM Drive', IEEE, Tokyo, presented at 12th IEEE International Conference on Electrical Machines and Systems, Tokyo, 15 November 2009 - 18 November 2009

Rahman MF; Chong GL; Dutta RD, 2009, 'Design and Thermal Considerations of an Interior Permanent Magnet Machine with Conctrated Windings', in Electrical Machines and Systems, 2009. ICEMS 2009. International Conference on, IEEE, Tokyo, presented at 12th IEEE International Conference on Electrical Machines and Systems, Tokyo, 15 November 2009 - 18 November 2009

Rahman MF; Foo GH; Soon , 2009, 'Design of the Direct Torque and Flux Control Scheme for IPM Synchronous Motor Drive', IEEE, Tokyo, presented at 12th IEEE International Conference on Electrical Machines and Systems, Tokyo, 15 November 2009 - 18 November 2009

Rahman MF; Foo GH; Soon , 2009, 'Analysis and Design of the SVM Direct Torque and Flux Controlled IPM Synchronous Motor Drive', IEEE, Adelaide, pp. 1 - 6, presented at AUPEC 2009, Adelaide, 27 September 2009 - 30 September 2009, http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5356588

Rahman MF; Chong GL; Dutta RD, 2009, 'Design and Mechanical Consideration of an IPM Machine with Concentrated Windings', IEEE, Adelaide, presented at AUPEC 2009, Adelaide, 27 September 2009 - 30 September 2009

Rahman MF; Foo GH, 2009, 'Direct Torque and Flux Controlled IPM Synchronous Motor Drive Using a Hybrid Signal Injection and Adaptive Sliding Mode Observer', IEEE, Adelaide, presented at AUPEC 2009, Adelaide, 27 September 2009 - 30 September 2009

Phung BT; Shao S; Chu M; Vickers C; Rahman MF, 2009, 'Partial Discharge Measurements in PWM Inverter-Driven Low-Voltage Motors', IEEE, Adelaide, Australia, presented at 19th Australasian Universities Power Engineering Conference (AUPEC 2009), Adelaide, Australia, 27 September 2009 - 30 September 2009

Rahman MF; Foo GH, 2009, 'Sensorless Direct Torque and Flux Control of IPM Synchronous Motor Drives using An Extended Rotor Flux Model', IEEE, Adelaide, presented at AUPEC 2009, Adelaide, 27 September 2009 - 30 September 2009

Rahman MF; Xiao D; Foo GH, 2009, 'Sensorless Direct and Torque Flux Control Matrix Converter Driven IPM Synchronous Motor Drive using Adpative Sliding Mode Observer Combined with High-Frequency Signal Injection', IEEE, San Jose, USA, presented at ECCE 2009, San Jose, USA, 20 September 2009 - 24 September 2009

Rahman MF; Chong GL; Dutta RD, 2009, 'Design of IPM machine with Concentrated Windings for Vehicular Applications', in EPE 2009 Barcelona, IEEE, Barcelona, Spain, presented at European Power Engineering Conference, Barcelona, Spain, 08 September 2009 - 10 September 2009

Rahman MF; Foo GH, 2009, 'An Extended Rotor Flux Model for Sensorless Direct Torque and Flux control of IPM Synchronous Motor Drives', Lille, France, presented at ELECTROMOTION, Lille, France, 01 July 2009 - 03 July 2009

Rahman MF; Chong GL; Dutta RD, 2009, 'Design of an Interior Permanent Magnet Machine with Concentrated Winding for Field Waekening Applications', IEEE, Miami, presented at International Electrical Machines and Drives Conference, Miami, 03 May 2009 - 06 May 2009

Rahman MF; Foo GH, 2009, 'Direct Torque and Flux Control of an IPM Synchronous Motor Drive Using a Back-Stepping Approach', IEEE, Miami, presented at International Electrical Machines and Drives Conference, Miami, 03 May 2009 - 06 May 2009

Rahman MF; Foo GH, 2009, 'Sensorless Adaptive Sliding Mode Control of an IPM Synchronous Motor Drive Using a Sliding Mode Observer and HF Signal Injection', IEEE, Miami, presented at International Electrical Machines and Drives Conference, Miami, 03 May 2009 - 06 May 2009

Xiao D; Rahman MF, 2008, 'A Modified Direct Torque Control for Matrix Converter Drives', in Australasian Universities Power Engineering Conference (AUPEC 2008), Sydney Australia, presented at The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, 04 December 2008 - 07 December 2008

Foo GH; Sayeef SM; Rahman MF, 2008, 'An Extended Kalman Filter for Sensorless Direct Torque Controlled IPM Synchronous Motor Drive', in Australasian Universities Power Engineering Conference (AUPEC 2008), Sydney Australia, presented at The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, 04 December 2008 - 07 December 2008

Xiao D; Rahman MF, 2008, 'An Improved Direct Torque Contraol for Matrix Converter Driven Interior Permanent Magnet Synchronous Motor', in Australasian Universities Power Engineering Conference (AUPEC 2008), Sydney Australia, presented at The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, 04 December 2008 - 07 December 2008

Chong GL; Dutta RD; Rahman MF, 2008, 'Parameter Analysis of an IPM Machine with Fractional-slot Cencentrated Windings, Part I : Open-circuit Analysis', in Australasian Universities Power Engineering Conference (AUPEC 2008), Sydney Australia, presented at The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, 04 December 2008 - 07 December 2008

Chong GL; Dutta RD; Rahman MF, 2008, 'Parameter Analysis of an IPM Machine with Fractional-Slot Concentrated Windings, Part II: Including Armature Reaction', in Australasian Universities Power Engineering Conference (AUPEC 2008), Sydney Australia, presented at The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, 04 December 2008 - 07 December 2008

Sayeef SM; Foo GH; Rahman MF, 2008, 'Rotor Position and Speed Estimation of Variable of a Variable Structure Direct Torque Controlled IPM Synchronous Motor Drive at Very Low Speeds', in Australasian Universities Power Engineering Conference (AUPEC 2008), Sydney Australia, presented at The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, 04 December 2008 - 07 December 2008

Foo G; Sayeef S; Rahman MF, 2008, 'An extended Kalman filter for sensorless direct torque controlled IPM synchronous motor drive', in 2008 Australasian Universities Power Engineering Conference, AUPEC 2008

Chong L; Dutta R; Rahman MF, 2008, 'Open circuit analysis of concentrated winding in interior permanent magnet machines with fractional slot distribution', in IET Conference Publications, pp. 235 - 239, http://dx.doi.org/10.1049/cp:20080518

Abdullah J; Mohamad GHP; Hamzah MA; Yusof MSM; Rahman MFA; Ismail F, 2008, 'Portable computed tomographic system for in-situ inspection of industrial pipelines', in Emerging Technologies in ETNDT - Proceedings of the 4th International Conference on Emerging Technologies in Non-Destructive Testing, ETNDT 4, pp. 211 - 214

Foo G; Sayeef S; Rahman MF, 2008, 'Sensorless direct torque and flux control of an IPM synchronous motor at low speed and standstill', in PECon 2008 - 2008 IEEE 2nd International Power and Energy Conference, pp. 277 - 282, http://dx.doi.org/10.1109/PECON.2008.4762484

Foo G; Sayeef S; Rahman MF, 2008, 'SVM direct torque controlled interior permanent magnet synchronous motor drive using an extended Kalman filter', in IET Conference Publications, pp. 712 - 716, http://dx.doi.org/10.1049/cp:20080614

Foo G; Sayeef S; Rahman MF, 2008, 'Wide speed operation of a direct torque and flux controlled IPM synchronous motor drive without a mechanical sensor', in 2008 IEEE International Conference on Sustainable Energy Technologies, ICSET 2008, pp. 1244 - 1249, http://dx.doi.org/10.1109/ICSET.2008.4747197

Foo GH; Sayeef SM; Rahman MF, 2008, 'Wide Speed Sensorless SVM Direct Torque Controlled Interior Permanent Magnet Synchronous Motor Drive', in Proceedings IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society, The Institute of Electrical and Electronics Engineers (IEEE),IEEE Industrial Electronics Society (IES), Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY 12571 USA, presented at 34th Annual Conference of the IEEE Industrial Electronics Society, Orlando, Florida USA, 10 November 2008 - 13 November 2008

Karanayil BV; Grantham C; Rahman MF, 2008, 'Induction Motor Parameter Determination Technique using Artificial Neural Network', in ICEMS 2008 International perference on Electrical Machines & Systems, China, presented at ICEMS 2008 International perference on Electrical Machines & Systems, China, 17 October 2008 - 20 October 2008

Xiao D; Rahman MF, 2008, 'Performance Improvement of Matrix Converter using a Modified Indirect Space Vector Modulation', in ICEMS 2008 International perference on Electrical Machines & Systems, China, presented at ICEMS 2008 International perference on Electrical Machines & Systems, China, 17 October 2008 - 20 October 2008

Chong GL; Rahman MF, 2008, 'Saliency Ratio Optimization in an IPM Machine with Fractional-slot Concentrated Windings', in ICEMS 2008 International perference on Electrical Machines & Systems, China, presented at ICEMS 2008 International perference on Electrical Machines & Systems, China, 17 October 2008 - 20 October 2008

Foo GH; Sayeef SM; Rahman MF, 2008, 'Sensorless Direct and Indirect Torque Control of an IPM Synchronous Motor Drive at Very Low Speed using Carrier Signal Injection', in ICEMS 2008 International perference on Electrical Machines & Systems, China, presented at ICEMS 2008 International perference on Electrical Machines & Systems, China, 17 October 2008 - 20 October 2008

Sayeef SM; Foo GH; Rahman MF, 2008, 'Very Low Speed Operation of a Variable Structure Direct Torque Controlled IPM Synchronous Motor Drive Using Combined HF Signal Injection and Sliding Observer', in Proceedings of the XVIII International Conference of Electrical Machines. (ICEM), Vilamoura, Portugel, presented at XVIII International Conference On Electrical Mchines (Icem), Vilamoura, Portugel, 06 September 2008 - 09 September 2008

Foo GH; Sayeef SM; Rahman MF, 2008, 'Sensorless Direct Torque and Flux Control of an IPM Synchronous Motor at Low Speed and Standstill', in 2008 13TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROLCONFERENCE, VOLS 1-5, Poznan Poland, presented at 13th International Power Electronics and Motion Control Confernece, 2008, Poznan Poland, 01 September 2008 - 03 September 2008

Chong GL; Dutta RD; Rahman MF, 2008, 'Open-circuit analysis of concentrated winding in interior permanent magnet machines', in UKACC International Conference on Control 1998, York St.Johns University York, UK, presented at 4th IET Conference on Power Electronics, Machines and Drives, York St.Johns University York, UK, 02 April 2008 - 04 April 2008

Sayeef SM; Foo GH; Rahman MF, 2008, 'SVM Direct Torque Contol of IPM Synchronous Motor at Very Low Speed', in UKACC International Conference on Control 1998, York St.Johns University York, UK, presented at 4th IET Conference on Power Electronics, Machines and Drives, York St.Johns University York, UK, 02 April 2008 - 04 April 2008

Foo GH; Sayeef SM; Rahman MF, 2008, 'SVM Direct Torque Control of IPM Synchronous Machine Drive using an Entended Kalman Filter', in UKACC International Conference on Control 1998, York St.Johns University York, UK, presented at 4th IET Conference on Power Electronics, Machines and Drives, York St.Johns University York, UK, 02 April 2008 - 04 April 2008

You K; Rahman MF, 2008, 'A matrix-Z-source converter for automotive integrated starter alternator system', in Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC, Austin, Texas, presented at 23rd Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2008, Austin, Texas, 24 February 2008 - 28 February 2008

Foo G; Sayeef S; Rahman MF, 2008, 'Sensorless direct torque and flux control of an ipm synchronous motor drive at low speed and standstill', in 2008 Australasian Universities Power Engineering Conference, AUPEC 2008

Chong GL; Rahman MF, 2008, 'Comparison of d- and q-axis Inductances in an IPM Machine with Integral-slot Distributed and Fractional-slot Concentrated Windings', in ICEM: 2008 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES, VOLS 1- 4, Ieee, New York, presented at ICEM: 2008 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES, VOLS 1- 4

Back to profile page