ORCID as entered in ROS
https://orcid.org/0000-0002-5091-2513
Select Publications
Journal articles
, 1991, 'The yield strength of off-stoichiometric Ni
, 1990, 'An ALCHEMI Investigation of Ternary Site Occupancy in NiAl-Based Alloys', Proceedings, annual meeting, Electron Microscopy Society of America, 48, pp. 448 - 449, http://dx.doi.org/10.1017/s0424820100135848
, 1990, 'Application of ALCHEMI to the study of non-Stoichiometric Compounds', Proceedings, annual meeting, Electron Microscopy Society of America, 48, pp. 472 - 473, http://dx.doi.org/10.1017/s0424820100135964
, 1990, 'Correlation Between Electrical Resistance and Microstructure in Gold Wirebonds on Aluminum Films', IEEE Transactions on Components, Hybrids, and Manufacturing Technology, 13, pp. 592 - 595, http://dx.doi.org/10.1109/33.58865
, 1990, 'Microstructure and mechanical properties of Fe40Al+Cr alloys', Scripta Metallurgica et Materiala, 24, pp. 2273 - 2278, http://dx.doi.org/10.1016/0956-716X(90)90078-U
, 1990, 'Room Temperature Strength and Fracture of FeAl And NiAl.', MRS Proceedings, 213, http://dx.doi.org/10.1557/proc-213-533
, 1989, 'The microstructure of extruded Fe-Al', Journal of Materials Science, 24, pp. 4246 - 4252, http://dx.doi.org/10.1007/BF00544494
, 1989, 'Observation of tweed microstructures in Ni-Al-Fe alloys', Proceedings, annual meeting, Electron Microscopy Society of America, 47, pp. 676 - 677, http://dx.doi.org/10.1017/s0424820100155359
, 1989, 'Observation of <111 > slip in NiAl', Scripta Metallurgica, 23, pp. 495 - 499, http://dx.doi.org/10.1016/0036-9748(89)90439-0
, 1989, 'Room temperature tensile ductility in polycrystalline B2 Ni-30Al-20Fe', Scripta Metallurgica, 23, pp. 897 - 900, http://dx.doi.org/10.1016/0036-9748(89)90267-6
, 1988, 'Improving Intermetallic Ductility and Toughness', JOM, 40, pp. 28 - 31, http://dx.doi.org/10.1007/BF03258828
, 1988, 'Improving the Low Temperature Ductility of NiAl', MRS Proceedings, 133, http://dx.doi.org/10.1557/proc-133-633
Conference Papers
, 2017, 'Investigation on the Early Stages of Growth of Secondary Grains in a Grain Oriented Silicon Steel', in Procedia Engineering, pp. 750 - 755, http://dx.doi.org/10.1016/j.proeng.2017.04.153
, 2017, 'The effect of final annealing heating rate on abnormal grain growth in a Fe-3.5%Si steel', in Materials Science Forum, pp. 350 - 355, http://dx.doi.org/10.4028/www.scientific.net/MSF.879.350
, 2016, '3D tomography of plasma sprayed Cr-clad Ni on alumina', in Proceedings of the International Thermal Spray Conference, pp. 161 - 167
, 2016, 'The effect of cross-rolling on the growth of goss grains in a grain oriented silicon steel', in Proceedings of the 6th International Conference on Recrystallization and Grain Growth, ReX and GG 2016, pp. 173 - 178, http://dx.doi.org/10.1007/978-3-319-48770-0_25
, 2015, 'Analysis of interfacial structure and chemistry in FeV
, 2015, 'CHARACTERISATION OF RURAL AND INDUSTRIAL MSW BIOMASS SOLID BI-PRODUCT, AND ASSESSMENT OF AGRONOMIC POTENTIAL AS A FERTILISER', in Obernberger I; Baxter D; Grassi A; Helm P (eds.), PAPERS OF THE 23RD EUROPEAN BIOMASS CONFERENCE, ETA-FLORENCE RENEWABLE ENERGIES, AUSTRIA, Vienna, pp. 378 - 386, presented at
, 2015, 'Splat formation of copper and copper alloy on ceramic substrate in plasma spray process', in Proceedings of the International Thermal Spray Conference, pp. 661 - 668
, 2014, 'The benefit and impact of on-line tools for microscopy and microanalysis training and education in core facilities', in Microscopy and Microanalysis, pp. 2158 - 2159, http://dx.doi.org/10.1017/S1431927614012525
, 2014, 'Microstructures and mechanical properties of two-phase FeNiMnAl alloys', in Materials Science Forum, pp. 2549 - 2554, http://dx.doi.org/10.4028/www.scientific.net/msf.783-786.2549
, 2012, 'An Overview of Dry Sliding Wear of Two-Phase FeNiMnAl Alloys', in Volume 1516 - Symposium JJ – Intermetallic-Based Alloys¯Science, Technology and Applications, Materials Research Society, Warrendale PA, USA, pp. 1 - 6, presented at
, 2011, 'The transition from internal to protective oxidation during oxidation of dilute Fe-Al alloys in Ar- 20% CO
, 2010, 'On Line Tools for Management of Multi-user Microcopy Facilities', in Microscopy and Microanalysis, Cambridge University Press, USA, pp. 1324 - 1325, presented at
, 2010, 'Online tools for management of multi-user microscopy facilities', in 21st Australian Conference on Microscopy and Microanalysis 2010,, Australian Microscopy and Microanalysis Society, Brisbane, presented at
, 2010, 'A Comparative Study of the Splat Morphology and the Splat-Substrate Interaction for NiCr Sprayed Onto Stainless Steel by Both Plasma and HVOF Spraying', in Marple BR; Agarwal A; Hyland MM; Lau Y-C; Li C-J; Lima RS; Montavon G (eds.), International Thermal Spray Conference, DVS Media GmbH, presented at
, 2009, 'Study of the Splat-Substrate Interface for a NiCr Coating Plasma Sprayed on to Polished Aluminum and Stainless Steel Substrates', in Marple BR; Hyland MM; Lau Y-C; Li C-J; Lima RS; Montavon G (eds.), International Thermal Spray Conference, ASM International, presented at
, 2009, 'Study of the Splat-Substrate Interface for a PEEK Coating Plasma-Sprayed onto Aluminum Substrates', in Marple BR; Hyland MM; Lau Y-C; Li C-J; Lima RS; Montavon G (eds.), International Thermal Spray Conference, ASM International, presented at
, 2007, 'Effects of Alloy Additions on Metal Dusting of Iron', in Corrosion Control 007 Conference, Sydney, presented at
, 2006, 'A blended approach to collaborative learning: Can it make large group teaching more student-centred?', in 23rd Annual Conference of the Australasian Society for Computers in Learning in Tertiary education Who`s Learning? Who`s learning?, Sydney, presented at
, 2006, 'A blended approach to collaborative learning: Can it make large group teaching more student-centred?', in Markauskaite L; Goodyear P; Reimann P (eds.), WHO'S LEARNING? WHOSE TECHNOLOGY?, PROCEEDINGS, VOLS 1 AND 2, SYDNEY UNIV PRESS, AUSTRALIA, Univ Sydney, Ctr Res Comp Supported Learning & Cognit, Sydney, pp. 33 - 42, presented at
, 2006, 'The Effect of the Substrate Hardness on Particle Morphology in High Velocity Thermal Spray Coatings', in Marple BR; Hyland MM; Lau Y-C; Lima RS; Voyer J (eds.), International Thermal Spray Conference, ASM International, presented at
, 2006, 'Three dimensional imaging of cracking in berkovich indented thin film coatings', in TMS 2006 annual Meeting, San Antonio, Texas, presented at
, 2005, 'The evolution of low defect density structures in silicon-on-sapphire thin films during post-ion implantation heat treatments', in Cullis AG; Hutchison JL (ed.), Microscopy of Semiconducting Materials, SPRINGER-VERLAG BERLIN, ENGLAND, Univ Oxford, Oxford, pp. 363 - 366, presented at
, 2003, 'The Applications of Focused Ion Beam Technology to Nanoscale Materials', in Oz Nano 03, Asia Pacific Nanotechnology Forum Annual Conference, Cairns, Australia, presented at
, 2003, 'Effects of interupted ageing on the microstructural development and mechanical propeties of an Al Alloy', in Frazier WE; Han YD; Kim NJ; Lee EW (eds.), 3rd International Conference on Light Materials for transportation Systems, 3rd International Conference on Light Materials for transportation Systems, Hawaii, presented at
, 2003, 'Artefacts in germanium transmission electron microscope specimens prepared by focused ion beam milling', in Microscopy of Semiconducting Materials 2003, Cambridge, UK, presented at
, 2003, 'Kelvin probe microscopy of localised potentials induced in non-conductive materials by a focussed ion beam', in Microscopy of Semiconducting Materials 2003, Cambridge, UK, presented at
, 2003, 'Surface damage in silicon after 30 KeV Ga FIB fabrication', in Microscopy and Microanalysis, pp. 884 - 885, http://dx.doi.org/10.1017/s1431927603444425
, 2002, 'Materials engineering tutorials for architecture students using computer-aided learning', in 13th Annual Conference for Australasian Association for Engineering Education and 8th Australasian Women In Engineering Forum, Canberra, ACT, Australia, presented at
, 2002, 'Ion Damage In Germanium Formed Using Gallium Ions In The FIB', in Engelbrecht J (ed.), 15th International Congress on Electron Microscopy, 15th International Congress on Electron Microscopy, Onderstepoort, South Africa, pp. 263 - 264, presented at
, 2002, 'Redeposition Effects In TEM Specimens Of Composites Prepared Using A Focused Ion Beam Miller', in Engelbrecht J (ed.), 15th International Congress on Electron Microscopy, 15th International Congress on Electron Microscopy, Onderstepoort, South Africa, pp. 261 - 262, presented at
, 2002, 'Recrystallized grain size in particulate reinforced metal matrix composites', in ACUN-4 Composite Systems Macrocomposites, Microcomposites and Nanocomposites, Sydney, presented at
, 2001, 'The Formulation of an Undergraduate Program in Nanotechnology', in Elsevier (ed.), 6th World Congress of Chemical Engineering, 6th Workd Congress of Chemical Engineering, Melbourne, pp. 65 - 70, presented at
, 2001, 'The structure of damage layers in transmission electron microscope specimens in elemental and compound semiconductors after FIB fabrication', in Cullis AG; Hutchison JL (ed.), MICROSCOPY OF SEMICONDUCTING MATERIALS 2001, IOP PUBLISHING LTD, ENGLAND, UNIV OXFORD, OXFORD, pp. 515 - 518, presented at
, 2001, 'The Structure of Damage Layers in Silicon After a FIB Fabrication', in Trodahl J; Eager A; Staines M; Atkinson S; Coats J (eds.), 25th Annual Condensed Matter Meeting, 25th Annual Condensed Matter Meeting, Marlborough Sounds, New Zealand, pp. 1 - 6, presented at
, 2001, 'Mechanical deformation of crystalline silicon during nanoindentation', in Materials Research Society Symposium - Proceedings
, 2001, 'Applications of the Focused Ion Beam Miller in Materials Science', in Leong YK; Kassim I; Lee HK; Ong KC (eds.), 10th Scientific Conference of the Electron Microscope Meeting of Malaysia, 10th Scientific Conference of the Electron Microscope Meeting of Malaysia, Malayasia, pp. 8 - 11, presented at
, 2001, 'Friction and Wear of a-Sialon Ceramics', in EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne, presented at
, 2001, 'Study of Metal Dusting of Fe-Cr and Fe-Ni-Cr Alloys under Cyclic Conditions', in Corrosion and Prevention 2001, Corrosion and Prevention 2001, Brentford square, vic 3131, australia, presented at
https://orcid.org/0000-0002-5091-2513