By Professor Paul Richard Munroe

Journal articles

Hanna J; baker I; Wittmann M; Munroe PR, 2005, 'A new high-strength spinodal alloy', Journal of Materials Research, 20, pp. 791 - 795

Rubanov S; Munroe PR, 2005, 'Damage in III-V compounds during focused ion beam milling', Microscopy and Microanalysis, 11, pp. 446 - 455

Cairney JM; Hoffman MJ; Munroe PR; Martin PJ; bendavid A, 2005, 'Deformation and fracture of Ti-Si-N nanocomposite films', Thin Solid Films, 479, pp. 193 - 200, http://www.sciencedirect.com/science/article/B6TW0-4F60NFS-9/2/6cbbc48c287ec55f52fed463011e11ab

Ma LW; Cairney JM; Hoffman MJ; Munroe PR, 2005, 'Deformation mechanisms operating during nanoindentation of TiN coatings on steel substrates', Surface and Coatings Technology, 192, pp. 11 - 18, http://www.sciencedirect.com/science/article/B6TVV-4CBW6T9-4/2/075a0b875feefa5127c8c07578f0492e

Yeoh W; Horvat J; Dou SX; Munroe PR, 2005, 'Effect of carbon nanotube size on superconductivity properties of MgB2', IEEE Transactions on Applied Superconductivity, 15, pp. 3284 - 3287

Xie Z; Hoffman MJ; Moon RJ; Munroe PR; Cheng YB, 2005, 'Effect of microstructure on sliding wear of Ca alpha-sialon ceramics', Key Engineering Materials, 280-283, pp. 1253 - 1258

Trompetter WJ; Hyland M; Munroe PR; Markwitz A, 2005, 'Evidence of Mechanical Interlocking of NICr particles Thermally Sprayed onto Al Sunstrates', Journal of Thermal Spray Technology, 14, pp. 524 - 529

Zhang DL; Ying D; Munroe PR, 2005, 'Formation of Al2O3 during heating of an Al/TiO2 nanocomposite powder', Journal of Materials Research, 20, pp. 307 - 313

Soltanian S; Wang X; Horvat J; Dou SX; Sumption M; Bhatia M; Collings E; Munroe PR; Tomsic M, 2005, 'High transport critical current density and large H-c2 and H-irr in nanoscale SiC doped MgB2 wires sintered at low temperature', Superconductor Science and Technology, 18, pp. 658 - 666

Coleman V; Bradby JE; Jagadish C; Munroe PR; Heo Y; Pearton S; Norton D; Inoue M; Yano M, 2005, 'Mechanical properties of ZnO epitaxial layers grown on a- and c-axis sapphire', Applied Physics Letters, 86, pp. 203105-1 - 203105-3, http://people.physics.anu.edu.au/~cxj109/Publications/Vic-ApplPhysLett_86-05.pdf

Ford SI; Young DJ; McGrouther D; Munroe PR, 2005, 'Microstructural characterization of a carbonitrided heat resisting alloy using focused ion beam-based techniques', Materials at High Temperatures, 22, pp. 351 - 358

Ford S; Young DJ; McGrouther D; Munroe PR, 2005, 'Microstructural characterization of a carbonitrided heat resisting alloy using focused ion beam-based techniques', Materials at High Temperatures, 22, pp. 351 - 358, http://dx.doi.org/10.1179/mht.2005.041

Baker I; Hanna JA; Wittmann MW; Munroe PR, 2005, 'Microstructure of a Spinodal Fe-Ni-Mn-Al Alloy', Microscopy and Microanalysis, 11, http://dx.doi.org/10.1017/s1431927605507190

McKenzie WR; Domyo H; Ho T; Munroe PR, 2005, 'Re-crystallisation of Amorphous Silicon in the Production of Low Defect Density Silicon on Sapphire Thin Films', Microscopy and Microanalysis, 11, http://dx.doi.org/10.1017/s1431927605500503

Haberl B; Bradby JE; Swain MV; Williams J; Munroe PR, 2005, 'Response to `Comment on `Phase transformations induced in relaxed amorphous silicon by indentation at room temperature` ` [Appl. Phys. Lett. 87, 016102 (2005)]', Applied Physics Letters, 87

Budde F; Ruck BJ; Koo A; Granville S; Trodahl HJ; Bittar A; Williams GV; Ariza M; Bonnet B; Jones DJ; Metson J; Rubanov S; Munroe PR, 2005, 'Stabilization of amorphous GaN by oxygen', Journal of Applied Physics, 98

Cairney JM; Munroe PR; Hoffman MJ, 2005, 'The application of Focussed ion beam technology to the characterization of coatings', Surface and Coatings Technology, 198, pp. 165 - 168

Ferry M; Munroe PR, 2004, 'Recrystallization kinetics and final grain size in a cold rolled particulate reinforced Al-based MMC', Composites Part A: Applied Science and Manufacturing, 35, pp. 1017 - 1025, http://dx.doi.org/10.1016/j.compositesa.2004.03.014

Yao QW; Wang XL; Li AH; Dou SX; Munroe PR, 2004, 'Effect of nano-Y-ZrO2 addition on the microstructure and critical current density of MgB2 superconductors', International Journal of Nanoscience, 3, pp. 563 - 569, http://dx.doi.org/10.1142/s0219581x04002383

Moon RJ; Xie Z; Hoffman MJ; Munroe PR; Cheng YB, 2004, 'Application of focused ion beam miller in indentation fracture characterization', Indentation Techniques in Ceramic Materials Characterization; Ceramic Transactions, 156, pp. 49 - 58, http://www.sciencedirect.com/science/article/B6WPV-4CNSXD3-25N/2/1f3bc33de28818e88cc05216ab0c61cf

Cairney JM; Harris SG; Ma L; Munroe PR; Doyle ED, 2004, 'Characterisation of TiN and TiAlN thin films deposited on groundsurfaces using focused ion beam milling', Journal of Materials Science, 39, pp. 3569 - 3575

Ma L; Cairney JM; Hoffman MJ; Munroe PR, 2004, 'Characterization of TiN thin films subjected to nanoindentation using focused ion beam milling', Applied Surface Science, 237, pp. 631 - 635

Rubanov S; Munroe PR, 2004, 'FIB-induced damage in silicon', Journal of Microscopy, 214, pp. 213 - 221

Young DJ; Burg ML; Munroe PR, 2004, 'Internal precipitation of Al2O3 and Cr2O3 in austenitic alloys', Materials Science Forum, 461-464, pp. 21 - 28

Ferry M; Munroe PR, 2004, 'Kinetics of Recrystallization and final grain size in an Al-based MMC.', Composites Part A - Applied Science and Manufacturing, 35, pp. 1017 - 1025

Baker I; Wu DL; Wittmann M; Munroe PR, 2004, 'Observation of strain-induced ferromagnetism in off-stoichiometricFe2AlMn single crystals', Materials Characterization, 52, pp. 209 - 216

Schneibel JH; Munroe PR, 2004, 'On the path dependence of the thermal vacancy concentration instoichiometric FeAl', Intermetallics, 12, pp. 111 - 115

Haberl B; Bradby JE; Swain MV; Williams JS; Munroe PR, 2004, 'Phase transformations in Relaxed Amorphous Silicon by Indentation at Room Temperature', Applied Physics Letters, 85, pp. 5559 - 5561

Buha J; Lumley R; Munroe PR; Crosky AG; Hill A, 2004, 'Positron studies of precipitation in 6061 aluminium alloy', Materials Forum, 28, pp. 1028 - 1033

Harris SG; Doyle ED; Wong Y; Munroe PR; Cairney JM; Long JM, 2004, 'Reducing the macroparticle content of cathodic arc evaporated TiNcoatings', Surface and Coatings Technology, 183, pp. 283 - 294

Xie Z; Hoffman MJ; Moon RJ; Munroe PR; Cheng YB, 2004, 'Subsurface indentation damage and mechanical characterization of alpha-sialon ceramics', Journal of the American Ceramic Society, 87, pp. 2114 - 2124

Buha J; Lumley R; Munroe PR; Crosky AG, 2004, 'TEM Analysis of and Interrupted aged 6061 alloy', Materials Forum, 28, pp. 1167 - 1172

Rubanov S; Munroe PR, 2004, 'The application of FIB milling for specimen preparation fromcrystalline germanium', Micron, 35, pp. 549 - 556

Wu DL; Baker I; Munroe PR, 2004, 'The effect of substitutional elements on the strain-inducedferromagnetism in B2-structured Fe-Al single crystals', Intermetallics, 12, pp. 851 - 858

Wittmann M; Baker I; Munroe PR, 2004, 'The structure and mechanical properties of Fe2AlMn single crystals', Philosophical Magazine, 84, pp. 3169 - 3194

Cairney JM; Harris SG; Munroe PR; Doyle ED, 2004, 'Transmission electron microscopy of TiN and TiAlN thin films usingspecimens prepared by focused ion beam milling', Surface and Coatings Technology, 183, pp. 239 - 246

Silver TM; Horvat J; Reinhard M; Yao P; Keshavarzi S; Munroe PR; Dou SX, 2004, 'Uranium doping and thermal neutron irradiation flux pinning effects inMgB2', IEEE Transactions on Applied Superconductivity, 14, pp. 33 - 39

Munroe P, 2003, 'Electron Microscopy in Australia', Microscopy Today, 11, pp. 51 - 51, http://dx.doi.org/10.1017/s1551929500053475

Soltanian S; Horvat J; Wang XL; Munroe P; Dou SX, 2003, 'Effect of nano-carbon particle doping on the flux pinning properties of MgB2 superconductor', Physica C: Superconductivity and its Applications, 390, pp. 185 - 190, http://dx.doi.org/10.1016/S0921-4534(03)00960-2

Stevens-Kalceff MA; Rubanov S; Munroe PR, 2003, 'Localised charging effects induced in non-conductive materials during focused ion beam milling', Microscopy and Microanalysis, 9, pp. 878 - 879, http://dx.doi.org/10.1017/s1431927603444395

Stevens-Kalceff MA; Rubanov S; Munroe PR, 2003, 'Localized charging effects resulting from focused ion beam processing of non-conductive materials', Materials Research Society Symposium - Proceedings, 792, pp. 641 - 646, http://dx.doi.org/10.1557/proc-792-r10.11

Xie Z; Munroe PR; Hoffman MJ; Moon JP; Cheng Y, 2003, 'Application of Focused Ion Beam Miller in Fracture Characterization', Key Engineering Materials, 247, pp. 297 - 300

Xie Z; Munroe PR; Moon JP; Hoffman MJ, 2003, 'Characterization of Surface Contact Induced Fracture in Ceramics Using a Focused Ion Beam Miller', Wear, 255, pp. 651 - 656

Cheng CH; Zhang H; Zhao Y; Feng Y; Rui XF; Munroe PR; Zeng HM; Koshizuka N; Murakami M, 2003, 'Doping effect of nano-diamond on superconductivity and flux pinning in MgB2', Superconductor Science and Technology, 16, pp. 1182 - 1186

Soltanian S; Wang XL; Horvat J; Qin MJ; Liu HK; Munroe PR; Dou SX, 2003, 'Effect of grain size and doping level of SiC on the superconductivity and critical current density in MgB2 superconductor', IEEE Transactions on Applied Superconductivity, 13, pp. 3273 - 3276

Soltanian S; Horvat J; Wang XL; Munroe PR; Dou SX, 2003, 'Effect of nano-carbon particle doping on the flux pinning properties of MgB2', Physical Review C, 390, pp. 185 - 190

Wang XL; Munroe PR; Yao P; Lonescu M; Dou SX, 2003, 'Effect of nano-Y-ZrO2 and SiO2 additions on the microstructure and critical density of MgB2 superconductors', Journal of Metastable and Nanocrystalline Materials, 15-16, pp. 721 - 726

Ferry M; Munroe PR, 2003, 'Enhanced recovery in a particulate reinforced aluminium composite', Materials Science and Engineering A, A358, pp. 142 - 151

Toh CH; Munroe PR; Young DJ; Foger K, 2003, 'High temperature carbon corrosion in solid oxide fuel cells', Materials at High Temperatures, 20, pp. 129 - 136

Toh CH; Munroe PR; Young DJ; Foger K, 2003, 'High temperature carbon corrosion in solid oxide fuel cells', Materials at High Temperatures, 20, pp. 129 - 136, http://dx.doi.org/10.1179/mht.2003.016

Back to profile page