Select Publications
Conference Papers
, 2014, 'High Impedance Fault Detection Based on Wavelet Entropy', Jeju, Korea, pp. 156 - 159, presented at
, 2014, 'Modeling and detection of high impedance faults', in Proceedings - 2014 International Conference on Smart Green Technology in Electrical and Information Systems: Towards Greener Globe Through Smart Technology, ICSGTEIS 2014, pp. 88 - 93, http://dx.doi.org/10.1109/ICSGTEIS.2014.7038738
, 2014, 'Application of partial direct-pole-placement and differential evolution algorithm to optimize controller and LCL filter design for grid-tied inverter', in Power Engineering Conference (AUPEC), 2014 Australasian Universities, pp. 1 - 6, presented at
, 2014, 'Arcing current features extraction using wavelet transform', in Proceedings of the International Symposium on Electrical Insulating Materials, pp. 221 - 224, http://dx.doi.org/10.1109/ISEIM.2014.6870758
, 2014, 'Autonomous micro-grid operation by employing weak droop control and PQ control', in Power Engineering Conference (AUPEC), 2014 Australasian Universities, pp. 1 - 5, presented at
, 2014, 'Design and modelling of grid-connected PMSG-based wind energy conversion through diode rectifier, DC/DC and DC/AC converters', in Power Engineering Conference (AUPEC), 2014 Australasian Universities, pp. 1 - 5, presented at
, 2014, 'Detection of High Impedance Faults using wavelet transform', in Power Engineering Conference (AUPEC), 2014 Australasian Universities, pp. 1 - 6, presented at
, 2014, 'Modeling and detection of high impedance faults', in Smart Green Technology in Electrical and Information Systems (ICSGTEIS), 2014 International Conference on, pp. 88 - 93, presented at
, 2013, 'Modeling of breaker operation for power balance after islanding detection by sensing jump change of harmonic voltage at PCC', in AUPEC 2013 Proceedings, Hobart, Tasmania, presented at
, 2013, 'Study on high impedance fault arcing current characteristics', in 2013 Australasian Universities Power Engineering Conference (AUPEC 2013), Hobart, Tasmania, pp. 1 - 6, presented at
, 2013, 'Frequency response of MV current transformers', in IEEE 2013 Tencon - Spring, TENCONSpring 2013 - Conference Proceedings, pp. 332 - 336, http://dx.doi.org/10.1109/TENCONSpring.2013.6584466
, 2013, 'Proportional resonant-controlled grid tied inverter with L-C resonant filter and its comparison with inverter with LCL filter', in IEEE 2013 Tencon - Spring, TENCONSpring 2013 - Conference Proceedings, pp. 272 - 276, http://dx.doi.org/10.1109/TENCONSpring.2013.6584454
, 2013, 'Study on transient and frequency response of current transformer using Jiles-Atherton model', in IEEE 2013 Tencon - Spring, TENCONSpring 2013 - Conference Proceedings, pp. 257 - 261, http://dx.doi.org/10.1109/TENCONSpring.2013.6584451
, 2013, 'Use of MV Current Transformers as Sensors for High Impedance Fault Detection', Seoul, South Korea, pp. 2150 - 2155, presented at
, 2013, 'Electrical power engineering education at UNSW', in 2013 Australasian Universities Power Engineering Conference, AUPEC 2013, http://dx.doi.org/10.1109/aupec.2013.6725410
, 2012, 'Transformer Frequency Response Analysis: A mathematical approach to interpret mid-frequency oscillations', in 2012 IEEE International Conference on Power and Energy (PECon), IEEE, Kota Kinabalu, Malaysia, pp. 962 - 966, presented at
, 2012, 'Incorporation of matlab-script based power electronics digital filtering and control algorithm into Simulink: A step closer to its microcontroller implementation', in POWERCON 2012, IEEE, USA, pp. 1 - 6, presented at
, 2012, 'Recognition of partial discharge using wavelet entropy and neural network for TEV measurement', in POWERCON 2012, IEEE, USA, pp. 1 - 6, presented at
, 2012, 'Entropy application in partial discharge analysis with non-intrusive measurement', in Advances in Intelligent and Soft Computing, pp. 319 - 324, http://dx.doi.org/10.1007/978-3-642-28308-6_43
, 2011, 'Study of effect of the nonlinear inductor behavior on the performance of resonant tank for driving fluorescent lamp', in Proceedings of the International Conference on Power Electronics and Drive Systems, pp. 1153 - 1157, http://dx.doi.org/10.1109/PEDS.2011.6147406
, 2011, 'Comparative THD analysis of different resonant tanks for driving fluorescent lamp', in Asia-Pacific Power and Energy Engineering Conference, APPEEC, http://dx.doi.org/10.1109/APPEEC.2011.5748512
, 2011, 'Comprehensive modeling of resonant inverter for driving fluorescent lamp with the consideration of nonlinear magnetization of inductor', in IEEE Transactions on Magnetics, pp. 4318 - 4321, http://dx.doi.org/10.1109/TMAG.2011.2157661
, 2010, 'Modeling the dynamics of a circuit containing saturable magnetic cores based on J-A model', in 2010 9th International Power and Energy Conference, IPEC 2010, pp. 46 - 51, http://dx.doi.org/10.1109/IPECON.2010.5697128
, 2010, 'Study on inrush current phenomenon in DC-DC converter with isolating transformer', in AUPEC 2010 - 20th Australasian Universities Power Engineering Conference: "Power Quality for the 21st Century"
, 2010, 'Study on performance of developed and industrial HFCT sensors', in AUPEC 2010 - 20th Australasian Universities Power Engineering Conference: "Power Quality for the 21st Century"
, 2010, 'Study on performance of HFCT and UHF sensors in partial discharge detection', in 2010 9th International Power and Energy Conference, IPEC 2010, pp. 630 - 635, http://dx.doi.org/10.1109/IPECON.2010.5697070
, 2010, 'Efficiency improvement for data-processing of partial discharge signals using parallel computing', in Proceedings of the 2010 IEEE International Conference on Solid Dielectrics, ICSD 2010, http://dx.doi.org/10.1109/ICSD.2010.5568206
, 2009, 'An alternative approach to analyze un-symmetrical faults in power systems', in IEEE Region 10 Annual International Conference, Proceedings/TENCON, http://dx.doi.org/10.1109/TENCON.2009.5396193
, 2008, 'Characterization of Mn-Zn ferrites using the coaxial transmission line method', in IEEE Transactions on Magnetics, pp. 1703 - 1710, http://dx.doi.org/10.1109/TMAG.2008.922029
, 2007, 'Characterization of dielectric and magnetic properties of Mn-Zn ferrites by using two capacitors made up of solid cylindrical samples with different dimensions', in 8th International Power Engineering Conference, IPEC 2007, pp. 1053 - 1058
, 2007, 'Dimensional effects on the measurement of permittivity of semiconducting materials used in high voltage XLPE cables', in 8th International Power Engineering Conference, IPEC 2007, pp. 201 - 206
, 2007, 'Newton-Raphson method to determine the intrinsic permittivity of XLPE cable', in 8th International Power Engineering Conference, IPEC 2007, pp. 314 - 319
, 2006, 'Effect of high permittivity and core dimensions on the permeability measurement for Mn-Zn ferrite cores used in high-frequency transformer', in Proceedings - Third IEEE International Workshop on Electronic Design, Test and Applications, DELTA 2006, pp. 371 - 376, http://dx.doi.org/10.1109/DELTA.2006.40
, 2006, 'Partial discharge phenomena due to electrical treeing in XLPE', in 2006 1st IEEE Conference on Industrial Electronics and Applications, http://dx.doi.org/10.1109/ICIEA.2006.257228
, 2006, 'Calculation of effective impedance of common-mode choke made of Mn-Zn ferrite', in 17th International Zurich Symposium on Electromagnetic Compatibility, 2006, pp. 391 - 394
, 2006, 'Prediction of maximum electric field with given independent sampling points in a reverberation chamber', in 17th International Zurich Symposium on Electromagnetic Compatibility, 2006, pp. 485 - 488
, 2005, 'Accurate determination of dielectric properties for Mn-Zn toroids', in INTERMAG ASIA 2005: Digests of the IEEE International Magnetics Conference, pp. 746
, 2004, 'A hierarchical voltage-reactive power control scheme for a radial transmission system', in 2004 International Conference on Power System Technology, POWERCON 2004, pp. 1157 - 1162
, 2003, 'Influences of loading absorber on the performances of a reverberation chamber', in IEEE International Symposium on Electromagnetic Compatibility, pp. 279 - 281
, 2002, 'Characterization of a reverberation chamber by 3D finite element method', in IEEE International Symposium on Electromagnetic Compatibility, pp. 394 - 396, http://dx.doi.org/10.1109/ELMAGC.2002.1177453
, 2002, 'Loading effect of EUT on maximal electric field level in a reverberation chamber for immunity test', in IEEE International Symposium on Electromagnetic Compatibility, pp. 972 - 975
, 2002, 'Study of influence of air gap generated by middle-span support for the horizontal stirrer on the performance of a reverberation chamber', in IEEE International Symposium on Electromagnetic Compatibility, pp. 502 - 505
, 2001, 'Analysis and improvement for the performance of 1D perfectly matched layers', in IEEE International Symposium on Electromagnetic Compatibility, pp. 568 - 573
, 2001, 'Study of independent sampling points in a reverberation chamber with two stirrers', in IEEE International Symposium on Electromagnetic Compatibility, pp. 577 - 581
, 2000, 'Flux-canceling effect and its application to shielding of magnetic field from power transmission lines', in IEEE International Symposium on Electromagnetic Compatibility, pp. 681 - 684
, 2000, 'Impact of stirrers' position on the properties of a reverberation chamber with two stirrers', in IEEE International Symposium on Electromagnetic Compatibility, pp. 7 - 10
, 1999, 'New method to analyze electric and magnetic fields in magnetic core with circular cross section', in Digests of the Intermag Conference
, 1999, 'Calculation of iron losses in ferrite toroids using FEM and complex vectors', in Digests of the Intermag Conference, http://dx.doi.org/10.1109/intmag.1999.837750
, 1998, 'Resonant method to construct core loss of magnetic materials using impedance analyzer', in PESC Record - IEEE Annual Power Electronics Specialists Conference, pp. 1997 - 2002, http://dx.doi.org/10.1109/PESC.1998.703454