Select Publications
Books
2023, Introduction: overview of polyurea, http://dx.doi.org/10.1016/B978-0-323-99450-7.00004-6
,2023, Polyurea: Synthesis, Properties, Composites, Production, and Applications, http://dx.doi.org/10.1016/C2021-0-01765-X
,Book Chapters
2023, 'A Highly Efficient Numerical Approach Using Fluid–Structure Interaction to Estimate Responses of Super-Tall Structures', in , pp. 489 - 499, http://dx.doi.org/10.1007/978-981-19-2886-4_34
,2023, 'Applications of polyurea coatings in blast and ballistic damage reduction', in Polyurea: Synthesis, Properties, Composites, Production, and Applications, pp. 323 - 345, http://dx.doi.org/10.1016/B978-0-323-99450-7.00013-7
,2023, 'Constitutive modeling of polyurea properties', in Polyurea: Synthesis, Properties, Composites, Production, and Applications, pp. 17 - 33, http://dx.doi.org/10.1016/B978-0-323-99450-7.00008-3
,2023, 'Current trends, prospects, and sustainability of polyurea and its reinforced composites', in Polyurea: Synthesis, Properties, Composites, Production, and Applications, pp. 383 - 391, http://dx.doi.org/10.1016/B978-0-323-99450-7.00012-5
,2023, 'Industrial examples of polyurea vs other polymer coatings', in Polyurea: Synthesis, Properties, Composites, Production, and Applications, pp. 349 - 358, http://dx.doi.org/10.1016/B978-0-323-99450-7.00016-2
,2023, 'Lessons Learnt from Recent Explosions in Storage Facilities with Ammonium Nitrate', in , pp. 113 - 123, http://dx.doi.org/10.1007/978-981-19-2886-4_8
,2023, 'Mechanical Recycling and Valorisation of Disposable Face Masks: A Potential Solution to the COVID-19 Waste Issue', in , pp. 101 - 113, http://dx.doi.org/10.1007/978-981-99-3471-3_8
,2023, 'Polyurea in construction and building applications', in Polyurea: Synthesis, Properties, Composites, Production, and Applications, pp. 239 - 272, http://dx.doi.org/10.1016/B978-0-323-99450-7.00015-0
,2023, 'Introduction: overview of polyurea', in Polyurea, Elsevier, pp. xxiii - xxvii, http://dx.doi.org/10.1016/b978-0-323-99450-7.00004-6
,Journal articles
2024, 'Predicting transient wind loads on tall buildings in three-dimensional spatial coordinates using machine learning', Journal of Building Engineering, 85, http://dx.doi.org/10.1016/j.jobe.2024.108725
,2024, 'Energy absorption and mechanical performance of 3D printed Menger fractal structures', Engineering Structures, 305, http://dx.doi.org/10.1016/j.engstruct.2024.117774
,2024, 'Influence of the cover plate thickness on the ballistic penetration of re-entrant auxetic structures', International Journal of Impact Engineering, 186, http://dx.doi.org/10.1016/j.ijimpeng.2024.104890
,2024, 'Quasi-static and dynamic compressive behaviour of additively manufactured Menger fractal cube structures', Defence Technology, http://dx.doi.org/10.1016/j.dt.2023.12.010
,2023, 'Influence of Graphene oxide on abrasion resistance and strength of concrete', Construction and Building Materials, 404, http://dx.doi.org/10.1016/j.conbuildmat.2023.133280
,2023, 'Behaviour of polymer-filled–concrete–steel double-skin tubular columns under combined lateral impact and axial compression loading', Structures, 56, http://dx.doi.org/10.1016/j.istruc.2023.104936
,2023, 'A technical review of computational fluid dynamics (CFD) applications on wind design of tall buildings and structures: Past, present and future', Journal of Building Engineering, 74, http://dx.doi.org/10.1016/j.jobe.2023.106828
,2023, 'The effects of a range of projectiles on bullet ricochet evidence from 1 mm sheet metal', Science and Justice, 63, pp. 651 - 661, http://dx.doi.org/10.1016/j.scijus.2023.08.003
,2023, 'Predicting adhesion strength of micropatterned surfaces using gradient boosting models and explainable artificial intelligence visualizations', Materials Today Communications, 36, http://dx.doi.org/10.1016/j.mtcomm.2023.106545
,2023, 'A simplified approach to modelling blasts in computational fluid dynamics (CFD)', Defence Technology, 23, pp. 19 - 34, http://dx.doi.org/10.1016/j.dt.2022.11.006
,2023, 'Ballistic impact response of flexible and rigid UHMWPE textile composites: Experiments and simulations', Defence Technology, 22, pp. 37 - 53, http://dx.doi.org/10.1016/j.dt.2022.08.009
,2023, 'Ballistic impact response of monolithic steel and tri-metallic steel–titanium–aluminium armour to nonrigid NATO FMJ M80 projectiles', Thin-Walled Structures, 182, http://dx.doi.org/10.1016/j.tws.2022.110200
,2023, 'Developing a Compression-moulded Composite Partitioning Panel from Banana Fibres and Polylactic acid (PLA)', Electronic Journal of Structural Engineering, 23, pp. 21 - 26, http://dx.doi.org/10.56748/EJSE.233832
,2022, 'Impact resistance and yarn pull-out behaviour of polymer spray-coated UHMWPE fabrics', Materials Today Communications, 33, http://dx.doi.org/10.1016/j.mtcomm.2022.104473
,2022, 'Development of a Coated Fabric Armour System of Aramid Fibre and Rubber', Thin-Walled Structures, 179, http://dx.doi.org/10.1016/j.tws.2022.109679
,2022, 'High-velocity projectile impact response of rubber-coated aramid Twaron fabrics', International Journal of Mechanical Sciences, 229, http://dx.doi.org/10.1016/j.ijmecsci.2022.107515
,2022, 'Abrasion and Strength of high percentage Graphene Oxide (GO) Incorporated Concrete', Electronic Journal of Structural Engineering, 22, pp. 37 - 43, http://dx.doi.org/10.56748/ejse.2233001
,2022, 'Wind Design of Tall Buildings: The State of the Art', Electronic Journal of Structural Engineering, https://ejsei.com/EJSE/article/view/331
,2021, 'Evaluation of effectiveness of polymer coatings in reducing blast-induced deformation of steel plates', Defence Technology, 17, pp. 1895 - 1904, http://dx.doi.org/10.1016/j.dt.2020.11.009
,2021, 'Evaluation of effectiveness of polymer coatings in reducing blast-induced deformation of steel plates', DEFENCE TECHNOLOGY, 17, pp. 1895 - 1904, http://dx.doi.org/10.1016/j.dt.2020.11.0092214-9147
,2021, 'On the impact response of UHMWPE woven fabrics: Experiments and simulations', International Journal of Mechanical Sciences, 204, http://dx.doi.org/10.1016/j.ijmecsci.2021.106574
,2021, 'Numerical Modelling of the Rate-sensitive Behaviour of High-performance Fabrics', Journal of Dynamic Behavior of Materials, 7, pp. 107 - 126, http://dx.doi.org/10.1007/s40870-020-00274-4
,2021, 'Stress propagation and debonding effects in impedance-graded multi-metallic systems under impact loading', International Journal of Protective Structures, 12, pp. 3 - 21, http://dx.doi.org/10.1177/2041419620917709
,2021, 'Wind loads on a super-tall slender structure: A validation of an uncoupled fluid-structure interaction (FSI) analysis', Journal of Building Engineering, 35, http://dx.doi.org/10.1016/j.jobe.2020.102028
,2021, 'Comparison between an uncoupled one-way and two-way fluid structure interaction simulation on a super-tall slender structure', Engineering Structures, 229, http://dx.doi.org/10.1016/j.engstruct.2020.111636
,2021, 'Behaviour of concrete specimens retrofitted with bio-based polyurethane coatings under dynamic loads', Construction and Building Materials, 270, http://dx.doi.org/10.1016/j.conbuildmat.2020.121860
,2020, 'Rate dependent tensile behavior of polyurethane under varying strain rates', Construction and Building Materials, 254, http://dx.doi.org/10.1016/j.conbuildmat.2020.119203
,2020, 'Ballistic performance of multi-metal systems', International Journal of Protective Structures, 11, pp. 379 - 410, http://dx.doi.org/10.1177/2041419619898693
,2020, 'Incorporation of shear thickening fluid effects into computational modelling of woven fabrics subjected to impact loading: A review', International Journal of Protective Structures, 11, pp. 340 - 378, http://dx.doi.org/10.1177/2041419619889071
,2020, 'Experimental, numerical and analytical study on the shock wave propagation through impedance-graded multi-metallic systems', International Journal of Mechanical Sciences, 178, http://dx.doi.org/10.1016/j.ijmecsci.2020.105621
,2020, 'An uncoupled fluid structure interaction method in the assessment of structural responses of tall buildings', Structures, 25, pp. 448 - 462, http://dx.doi.org/10.1016/j.istruc.2020.03.031
,2020, 'Implications of impact experiments on honeycomb shielded exterior beam-column joint', Engineering Structures, 212, http://dx.doi.org/10.1016/j.engstruct.2020.110470
,2020, 'Hyper-viscoelastic constitutive models for predicting the material behavior of polyurethane under varying strain rates and uniaxial tensile loading', Construction and Building Materials, 236, http://dx.doi.org/10.1016/j.conbuildmat.2019.117417
,2020, 'Prediction of plywood deformation under the impact of windborne debris using Taguchi method', IOP Conference Series: Materials Science and Engineering, 671, http://dx.doi.org/10.1088/1757-899X/671/1/012096
,2019, 'Behaviour of explosively welded impedance-graded multi-metal composite plates under near-field blast loads', International Journal of Mechanical Sciences, 163, http://dx.doi.org/10.1016/j.ijmecsci.2019.105124
,2019, 'Design of an impedance-graded metallic composite system as a protective mechanism for concrete structures', Journal of Applied Mechanics, Transactions ASME, 86, http://dx.doi.org/10.1115/1.4043886
,2019, 'Numerical investigation of scale resolved turbulence models (LES, ELES and DDES) in the assessment of wind effects on supertall structures', Journal of Building Engineering, 25, http://dx.doi.org/10.1016/j.jobe.2019.100842
,2019, 'An innovative approach of using continuous impedance-graded metallic composite system for attenuation of stress waves', Journal of Applied Mechanics, Transactions ASME, 86, http://dx.doi.org/10.1115/1.4042681
,2019, 'Comparison of Reynolds Averaging Navier-Stokes (RANS) turbulent models in predicting wind pressure on tall buildings', Journal of Building Engineering, 21, pp. 1 - 17, http://dx.doi.org/10.1016/j.jobe.2018.09.021
,