Select Publications
Journal articles
2025, 'Effect of fractal dimension on mechanical behaviour and energy absorption of Menger sponge-inspired fractal structures', Thin-Walled Structures, 206, http://dx.doi.org/10.1016/j.tws.2024.112704
,2025, 'Interpolating wind pressure time-histories around a tall building - A deep learning-based approach', Journal of Wind Engineering and Industrial Aerodynamics, 256, http://dx.doi.org/10.1016/j.jweia.2024.105968
,2025, 'Uniaxial compressive response of cement mortar with waste aluminium fibre sourced from electrical distribution cables', Multiscale and Multidisciplinary Modeling, Experiments and Design, 8, http://dx.doi.org/10.1007/s41939-024-00622-0
,2024, 'Low-velocity impact response and energy absorption of Menger sponge-inspired fractal structures fabricated by selective laser melting', Engineering Structures, 321, http://dx.doi.org/10.1016/j.engstruct.2024.118955
,2024, 'Investigation of band-beam slabs subjected to close-in blast loading - Experimental and numerical study', Journal of Building Engineering, 98, http://dx.doi.org/10.1016/j.jobe.2024.111446
,2024, 'Post-blast histological changes to three animal bones exposed to close-range chemical detonation', International Journal of Legal Medicine, 138, pp. 2551 - 2558, http://dx.doi.org/10.1007/s00414-024-03270-8
,2024, 'An explainable machine learning approach to predict the compressive strength of graphene oxide-based concrete', Construction and Building Materials, 449, http://dx.doi.org/10.1016/j.conbuildmat.2024.138346
,2024, 'Correlations between moisture expansion and flexural properties of bamboo strips in response to different loading rates', European Journal of Wood and Wood Products, 82, pp. 1333 - 1344, http://dx.doi.org/10.1007/s00107-024-02091-1
,2024, 'Eco-friendly mix design of slag-ash-based geopolymer concrete using explainable deep learning', Results in Engineering, 23, http://dx.doi.org/10.1016/j.rineng.2024.102503
,2024, 'Impact evidence and post-ricochet behaviour of shotgun pellets ricocheting off standard floor tiles', Science and Justice, 64, pp. 466 - 476, http://dx.doi.org/10.1016/j.scijus.2024.07.003
,2024, 'Use of explainable machine learning models in blast load prediction', Engineering Structures, 312, http://dx.doi.org/10.1016/j.engstruct.2024.118271
,2024, 'Quasi-static and dynamic compressive behaviour of additively manufactured Menger fractal cube structures', Defence Technology, 37, pp. 39 - 49, http://dx.doi.org/10.1016/j.dt.2023.12.010
,2024, 'Experimental investigation of band-beam slabs subjected to close-range blast loading', Engineering Structures, 309, http://dx.doi.org/10.1016/j.engstruct.2024.118075
,2024, 'Influence of graphene oxide properties, superplasticiser type, and dispersion technique on mechanical performance of graphene oxide-added concrete', Construction and Building Materials, 428, http://dx.doi.org/10.1016/j.conbuildmat.2024.136415
,2024, 'Predicting transient wind loads on tall buildings in three-dimensional spatial coordinates using machine learning', Journal of Building Engineering, 85, http://dx.doi.org/10.1016/j.jobe.2024.108725
,2024, 'Energy absorption and mechanical performance of 3D printed Menger fractal structures', Engineering Structures, 305, http://dx.doi.org/10.1016/j.engstruct.2024.117774
,2024, 'Influence of the cover plate thickness on the ballistic penetration of re-entrant auxetic structures', International Journal of Impact Engineering, 186, http://dx.doi.org/10.1016/j.ijimpeng.2024.104890
,2023, 'Influence of Graphene oxide on abrasion resistance and strength of concrete', Construction and Building Materials, 404, http://dx.doi.org/10.1016/j.conbuildmat.2023.133280
,2023, 'Behaviour of polymer-filled–concrete–steel double-skin tubular columns under combined lateral impact and axial compression loading', Structures, 56, http://dx.doi.org/10.1016/j.istruc.2023.104936
,2023, 'A technical review of computational fluid dynamics (CFD) applications on wind design of tall buildings and structures: Past, present and future', Journal of Building Engineering, 74, http://dx.doi.org/10.1016/j.jobe.2023.106828
,2023, 'The effects of a range of projectiles on bullet ricochet evidence from 1 mm sheet metal', Science and Justice, 63, pp. 651 - 661, http://dx.doi.org/10.1016/j.scijus.2023.08.003
,2023, 'Predicting adhesion strength of micropatterned surfaces using gradient boosting models and explainable artificial intelligence visualizations', Materials Today Communications, 36, http://dx.doi.org/10.1016/j.mtcomm.2023.106545
,2023, 'A simplified approach to modelling blasts in computational fluid dynamics (CFD)', Defence Technology, 23, pp. 19 - 34, http://dx.doi.org/10.1016/j.dt.2022.11.006
,2023, 'Ballistic impact response of flexible and rigid UHMWPE textile composites: Experiments and simulations', Defence Technology, 22, pp. 37 - 53, http://dx.doi.org/10.1016/j.dt.2022.08.009
,2023, 'Ballistic impact response of monolithic steel and tri-metallic steel–titanium–aluminium armour to nonrigid NATO FMJ M80 projectiles', Thin-Walled Structures, 182, http://dx.doi.org/10.1016/j.tws.2022.110200
,2023, 'Developing a Compression-moulded Composite Partitioning Panel from Banana Fibres and Polylactic acid (PLA)', Electronic Journal of Structural Engineering, 23, pp. 21 - 26, http://dx.doi.org/10.56748/EJSE.233832
,2022, 'Impact resistance and yarn pull-out behaviour of polymer spray-coated UHMWPE fabrics', Materials Today Communications, 33, http://dx.doi.org/10.1016/j.mtcomm.2022.104473
,2022, 'Development of a Coated Fabric Armour System of Aramid Fibre and Rubber', Thin-Walled Structures, 179, http://dx.doi.org/10.1016/j.tws.2022.109679
,2022, 'High-velocity projectile impact response of rubber-coated aramid Twaron fabrics', International Journal of Mechanical Sciences, 229, http://dx.doi.org/10.1016/j.ijmecsci.2022.107515
,2022, 'Abrasion and Strength of high percentage Graphene Oxide (GO) Incorporated Concrete', Electronic Journal of Structural Engineering, 22, pp. 37 - 43, http://dx.doi.org/10.56748/ejse.2233001
,2022, 'Wind Design of Tall Buildings: The State of the Art', Electronic Journal of Structural Engineering, https://ejsei.com/EJSE/article/view/331
,2021, 'Evaluation of effectiveness of polymer coatings in reducing blast-induced deformation of steel plates', Defence Technology, 17, pp. 1895 - 1904, http://dx.doi.org/10.1016/j.dt.2020.11.009
,2021, 'Evaluation of effectiveness of polymer coatings in reducing blast-induced deformation of steel plates', DEFENCE TECHNOLOGY, 17, pp. 1895 - 1904, http://dx.doi.org/10.1016/j.dt.2020.11.0092214-9147
,2021, 'On the impact response of UHMWPE woven fabrics: Experiments and simulations', International Journal of Mechanical Sciences, 204, http://dx.doi.org/10.1016/j.ijmecsci.2021.106574
,2021, 'Numerical Modelling of the Rate-sensitive Behaviour of High-performance Fabrics', Journal of Dynamic Behavior of Materials, 7, pp. 107 - 126, http://dx.doi.org/10.1007/s40870-020-00274-4
,2021, 'Stress propagation and debonding effects in impedance-graded multi-metallic systems under impact loading', International Journal of Protective Structures, 12, pp. 3 - 21, http://dx.doi.org/10.1177/2041419620917709
,2021, 'Wind loads on a super-tall slender structure: A validation of an uncoupled fluid-structure interaction (FSI) analysis', Journal of Building Engineering, 35, http://dx.doi.org/10.1016/j.jobe.2020.102028
,2021, 'Comparison between an uncoupled one-way and two-way fluid structure interaction simulation on a super-tall slender structure', Engineering Structures, 229, http://dx.doi.org/10.1016/j.engstruct.2020.111636
,2021, 'Behaviour of concrete specimens retrofitted with bio-based polyurethane coatings under dynamic loads', Construction and Building Materials, 270, http://dx.doi.org/10.1016/j.conbuildmat.2020.121860
,2020, 'Rate dependent tensile behavior of polyurethane under varying strain rates', Construction and Building Materials, 254, http://dx.doi.org/10.1016/j.conbuildmat.2020.119203
,2020, 'Ballistic performance of multi-metal systems', International Journal of Protective Structures, 11, pp. 379 - 410, http://dx.doi.org/10.1177/2041419619898693
,2020, 'Incorporation of shear thickening fluid effects into computational modelling of woven fabrics subjected to impact loading: A review', International Journal of Protective Structures, 11, pp. 340 - 378, http://dx.doi.org/10.1177/2041419619889071
,2020, 'Experimental, numerical and analytical study on the shock wave propagation through impedance-graded multi-metallic systems', International Journal of Mechanical Sciences, 178, http://dx.doi.org/10.1016/j.ijmecsci.2020.105621
,2020, 'An uncoupled fluid structure interaction method in the assessment of structural responses of tall buildings', Structures, 25, pp. 448 - 462, http://dx.doi.org/10.1016/j.istruc.2020.03.031
,2020, 'Implications of impact experiments on honeycomb shielded exterior beam-column joint', Engineering Structures, 212, http://dx.doi.org/10.1016/j.engstruct.2020.110470
,2020, 'Hyper-viscoelastic constitutive models for predicting the material behavior of polyurethane under varying strain rates and uniaxial tensile loading', Construction and Building Materials, 236, http://dx.doi.org/10.1016/j.conbuildmat.2019.117417
,2020, 'Prediction of plywood deformation under the impact of windborne debris using Taguchi method', IOP Conference Series: Materials Science and Engineering, 671, http://dx.doi.org/10.1088/1757-899X/671/1/012096
,2019, 'Behaviour of explosively welded impedance-graded multi-metal composite plates under near-field blast loads', International Journal of Mechanical Sciences, 163, http://dx.doi.org/10.1016/j.ijmecsci.2019.105124
,2019, 'Design of an impedance-graded metallic composite system as a protective mechanism for concrete structures', Journal of Applied Mechanics, Transactions ASME, 86, http://dx.doi.org/10.1115/1.4043886
,2019, 'Numerical investigation of scale resolved turbulence models (LES, ELES and DDES) in the assessment of wind effects on supertall structures', Journal of Building Engineering, 25, http://dx.doi.org/10.1016/j.jobe.2019.100842
,