ORCID as entered in ROS
https://orcid.org/0000-0003-2538-5552
Scheduled Maintenance Notice
Please note that Researcher Profiles will be undergoing scheduled maintenance on Wednesday 7th Oct, from 8:00am to 9:00am. During this time, the Researcher Profiles system will be unavailable. We apologise for any inconvenience and appreciate your understanding.
Select Publications
Journal articles
, 2006, 'Ammonium phosphate slurry rheology and particle properties—The influence of Fe(III) and Al(III) impurities, solid concentration and degree of neutralization', Chemical Engineering Science, 61, pp. 5856 - 5866, http://dx.doi.org/10.1016/j.ces.2006.05.010
, 2003, 'Entrainment of a two-layer liquid through a tap-hole', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, 34B, pp. 821 - 832
, 2002, 'Sloshing of Melts in a Bath Smelting Process Having an Elliptic Cross Section', ISIJ International, 42, pp. 692 - 701
, 2002, 'Numerical modelling of free surface flows in metallurgical vessels', , 26, pp. 113 - 140
, 2002, 'Sloshing of melts in a bath smelting process having an elliptic cross section', ISIJ International, 42, pp. 694 - 701, http://dx.doi.org/10.2355/isijinternational.42.694
, 2001, 'A Volume of Fluid (VOF) Method for the Simulation of Metallurgical Flows', ISIJ International, 41, pp. 225 - 233, http://dx.doi.org/10.2355/isijinternational.41.225
, 2001, 'Splash formation by spherical drops', Journal of Fluid Mechanics, 427, pp. 73 - 106
, 2000, 'An investigation of the flow regimes resulting from splashing drops', Physics of Fluids, 12, pp. 747 - 763, http://dx.doi.org/10.1063/1.870332
, 2000, 'Quasi-equilibrium bubble formation during top-submerged gas injection', Chemical Engineering Science, 55, pp. 4515 - 4524, http://dx.doi.org/10.1016/S0009-2509(00)00095-6
, 1999, 'Experimental and numerical comparisons of the break-up of a large bubble', Experiments in Fluids, 26, pp. 524 - 534, http://dx.doi.org/10.1007/s003480050319
, 1998, 'Study of refractory wear in the tuyere region of a peirce-smith nickel convertor', Canadian Metallurgical Quarterly, 37, pp. 99 - 117, http://dx.doi.org/10.1016/S0008-4433(98)00003-2
, 1998, 'Study of refractory wear in the tuyere region of a Peirce-Smith nickel convertor', Canadian Metallurgical Quarterly, 37, pp. 99 - 117, http://dx.doi.org/10.1016/s0008-4433(98)00003-2
, 1998, 'Low-cost design of 35 mm drum camera for high-resolution, high-speed image analysis', Review of Scientific Instruments, 69, pp. 4195 - 4197, http://dx.doi.org/10.1063/1.1149230
, 1996, 'Experimental study of splash generation in a flash smelting furnace', Metallurgical and Materials Transactions B, 27, pp. 633 - 646, http://dx.doi.org/10.1007/BF02915661
, 1995, 'Study of slopping and splashing in a cylindrical bath with top-submerged injection', Metallurgical and Materials Transactions B, 26, pp. 887 - 889, http://dx.doi.org/10.1007/BF02651734
, 1991, 'The simple cycle of the pressure swing adsoprtion process', Chemical Engineering Research and Design, 69A, pp. 215 - 220
, 1990, 'Slopping resulting from gas injection in a peirce-smith converter: Water modeling', Metallurgical Transactions B, 21, pp. 987 - 996, http://dx.doi.org/10.1007/BF02670269
, 1990, 'Slopping resulting from gas injection in a peircesmith converter: The period of the standing wave', Metallurgical Transactions B, 21, pp. 657 - 664, http://dx.doi.org/10.1007/BF02654244
, 1990, 'The backfill cycle of the pressure swing adsorption process', AIChE Journal, 36, pp. 53 - 65, http://dx.doi.org/10.1002/aic.690360108
, 1988, 'A model of bubble growth in wetting and non-wetting liquids', Chemical Engineering Science, 43, pp. 3129 - 3139, http://dx.doi.org/10.1016/0009-2509(88)85122-4
, 1982, 'Direct measurement of external mass transfer in packed sorbent beds', AIChE Journal, 28, pp. 344 - 346, http://dx.doi.org/10.1002/aic.690280226
Conference Papers
, 2025, 'Influence of Geometric Parameters on Estimations of Heat Transfer Coefficients in Pillow-Plate Channels', Perth , Australia, presented at
, 2025, 'Novel Correlations for Coefficients of Heat Transfer and Pressure Drop in Outer Channels of Pillow-Plate Heat Exchangers', Curtin University, Perth , Australia, presented at
, 2024, 'A novel correlation for mean hydraulic diameter in single-embossed channels of pillow-plate heat exchangers', in Kramer M; Niven R; Ghodrat M; Liow J (eds.), Proceedings of the 24th Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Canberra, presented at
, 2024, 'Evaluation of geometric parameter effects on outer channel mean hydraulic diameter of pillow-plate heat exchangers', in Kramer M; Niven R; Ghodrat M; Liow J (eds.), Proceedings of the 24th Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Canberra, presented at
, 2024, 'Viscoelastic properties of silly putty® with hollow glass microspheres', in Kramer M; Niven R; Ghodrat M; Liow JL (eds.), Proceedings of the 24th Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Canberra, presented at
, 2024, 'Development of wood-geopolymer composites for masonry units: Effect of alkaline solution ratio and wood type', in Fib Symposium, pp. 860 - 869
, 2023, 'An Artificial Neural Network Model for Predicting Hydraulic Diameters in Pillow-Plate Heat Exchangers', in Tokumasu T; Ahn J (ed.), Twentieth International Conference on Flow Dynamics (ICFD2023), Institute of Fluid Science, Tohoku University, Sendai, Miyagi, Japan, presented at
, 2023, 'A Novel Method in Predicting Heat Transfer Coefficient and Pressure Drop in Pillow-Plate Heat Exchangers', in Twentieth International Conference on Flow Dynamics (ICFD2023), Institute of Fluid Science, Tohoku University, Sendai, Miyagi, Japan, presented at
, 2022, 'Investigation of a 75mm axial flow hydrocyclone for industrial use: an alternative to the reverse flow hydrocyclone', in Proceedings of the 23rd Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, University of Sydney, Australia, presented at
, 2020, 'CFD analysis to estimate the best validation approach for reverse flow hydrocyclone', in 22nd Australasian Fluid Mechanics Conference Afmc 2020, University of Queensland Library, presented at
, 2019, 'Effect of electrostatic repulsion induced by superplasticizers on the flow behaviour of fly ash pastes', in Sustainable Construction Materials and Technologies, Kingston University London, UK, presented at
, 2018, 'A Low Cost Extensional Viscometer for Small Relaxation Times', in Lau TCW; Kelso R (ed.), Proceedings of the 21st Australasian Fluid Mechanics Conference, The University of Adelaide, Adelaide, presented at
, 2018, 'Molecular dynamics study on the structural and dynamic properties of xanthan gum in a dilute solution under the effect of temperature', in Ha DT; Vyas A; BoitelConti M; Ludwig M; Ruml T; Wang FM; Truong DH; Dao TT (eds.), Aip Conference Proceedings, AIP Publishing, VIETNAM, Ton Duc Thang Univ, Ho Chi Minh City, pp. 030008, presented at
, 2018, 'A low cost extensional viscometer for small relaxation times', in Proceedings of the 21st Australasian Fluid Mechanics Conference Afmc 2018, http://dx.doi.org/10.26190/unsworks/27668
, 2016, 'Simulation and experimental validation of an axial-flow hydrocyclone', in Ivey G; Tongming Z; Jones N; Draper S (eds.), Proceedings of the 20th Australasian fluid mechanics conference, University of WEstern Australia, Perth, presented at
, 2016, 'Simulation and experimental validation of an axial-flow hydrocyclone', in Proceedings of the 20th Australasian Fluid Mechanics Conference, AFMC 2016
, 2016, 'Simulation and experimental validation of an axial-flow hydrocyclone', in Proceedings of the 20th Australasian Fluid Mechanics Conference Afmc 2016
, 2014, 'Drop Formation At A T-Junction With Dilute Xanthan Gum Solutions As The Dispersed Phase', in Chowdhury H; Alam F (ed.), Proceedings of the 19th Australasian Fluid Mechanics Conference, RMIT University, Melbourne, presented at
, 2013, 'A general procedure for solving the population balance equation in flocculating suspensions', in Particle Technology Forum 2013 Core Programming Area at the 2013 Aiche Annual Meeting Global Challenges for Engineering A Sustainable Future, pp. 97 - 99
, 2013, 'Experimental and computational study of the causes of the fishhook effect in a mini-hydrocyclone', in Separations Division 2013 Core Programming Area at the 2013 Aiche Annual Meeting Global Challenges for Engineering A Sustainable Future, pp. 178 - 181
, 2012, 'A force balance model for the size prediction of droplets formed at T-junction with xanthan gum solutions', in Proceedings of the Eighteenth Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Launceston, TAS, pp. 1 - 4, presented at
, 2012, 'Dip and drift in spin bowling', in Proceedings of the Eighteenth Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Launceston, TAS, pp. 1 - 4, presented at
, 2012, 'Experimental study of the causes of the fishhook effect in a mini-Hydrocyclone', in Proceedings of the Eighteenth Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Launceston, TAS, pp. 1 - 4, presented at
, 2012, 'Investigation on the droplet formation time with xanthan gum solutions at a T-junction', in Proceedings of the ASME 2012 Fluids Engineering Division Summer Meeting FEDSM2012, ASME, New York, pp. 1 - 9, presented at
, 2012, 'Study of the transitional flow and particle separation with a fishhook effect in a mini-hydrocyclone', in Proceedings of the ASME 2012 Fluids Engineering Division Summer Meeting FEDSM2012, ASME, New York, pp. 1 - 10, presented at
, 2012, 'Micro-droplet formation with non-Newtonian solutions in microfluidic T-junctions with different inlet angles', in 2012 7th IEEE International Conference on Nano Micro Engineered and Molecular Systems NEMS 2012, pp. 423 - 428, http://dx.doi.org/10.1109/NEMS.2012.6196809
, 2012, 'Micro-droplet formation with non-Newtonian solutions in microfluidic T-junctions with different inlet angles', in IEEE-NEMS 2012 Proceedings, Kyoto, Japan, pp. 548 - 553, presented at
, 2012, 'Study of the transitional flow and particle separation with a fishhook effect in a mini-hydrocyclone', in American Society of Mechanical Engineers Fluids Engineering Division Publication Fedsm, pp. 289 - 298, http://dx.doi.org/10.1115/FEDSM2012-72095
, 2011, 'COMPUTATIONAL STUDY OF CENTRIFUGAL INSTABILITIES IN A MICRO-SIZED HYDROCYCLONE', in Chemeca 2011, Engineers Australia, Sydney, pp. 1 - 11, presented at
Filter by type
https://orcid.org/0000-0003-2538-5552