Select Publications

Conference Papers

2023, 'An investigation of the heating, drying, and pyrolysis process of two separate moisturized cellulosic leaves', in MODSIM2023, 25th International Congress on Modelling and Simulation., Modelling and Simulation Society of Australia and New Zealand, presented at 25th International Congress on Modelling and Simulation, http://dx.doi.org/10.36334/modsim.2023.edalatinejad

2023, 'Effect of wind speed on wildfire interaction with multiple structures in the wildland�urban interface', in MODSIM2023, 25th International Congress on Modelling and Simulation., Modelling and Simulation Society of Australia and New Zealand, presented at 25th International Congress on Modelling and Simulation, http://dx.doi.org/10.36334/modsim.2023.ghodrat136

Ajorloo M; Ghodrat M; Scott J; Strezov V, 2022, 'Modelling and Statistical Analysis of Plastic Steam Gasification', in Lei C; Thornber B; Armfield S (eds.), Proceedings of the 23rd Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Sydney, Australia, pp. 1 - 8, presented at 23rd Australasian Fluid Mechanics Conference – 23AFMC, Sydney, Australia, 04 December 2022 - 08 December 2022, https://www.afms.org.au/proceedings/23/Ajorloo_et_al_2022.pdf

Edalati-nejad A; Ghodrat M; Sharples JJ, 2022, 'Modelling the moisture effect on the rate of spread of fire in a leaf-like fuel element', in Lei C; Thornber B; Armfield S (eds.), Australasian Fluid Mechanics Society, Sydney, presented at 23rd Australasian Fluid Mechanics Conference – 23AFMC, Sydney, 04 December 2022 - 08 December 2022, https://www.afms.org.au/proceedings/23/Edalati-nejad_et_al_2022.pdf

Edalati-Nejad A; Fanaee SA; Ghodrat M, 2020, 'CFD modeling of unsteady Counterflow flame into Rhodium catalytic chamber', in 22nd Australasian Fluid Mechanics Conference, AFMC 2020, http://dx.doi.org/10.14264/f02452b

Ahmadian Hosseini A; Ghodrat M; Hosseini SH; Golparvar B; Calautit JK; Ahmadi G, 2020, 'CFD Study of Evaporative Cooling System Integrated to a Windcatcher', in 22nd Australasian Fluid Mechanics Conference, AFMC 2020, http://dx.doi.org/10.14264/3990f29

Eftekharian E; Ghodrat M; Ong RH; He Y; Kwok KCS, 2018, 'CFD investigation of cross-flow effects on fire-wind enhancement', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018

Ghodrat M; Sharafi P; Samali B, 2018, 'Recovery of platinum group metals out of automotive catalytic converters scrap: A review on australian trends and challenges', in Minerals, Metals and Materials Series, pp. 149 - 161, http://dx.doi.org/10.1007/978-3-319-72131-6_13

Rashidi M; Ancich E; Ghodrat M; Buckley P, 2018, 'Review of the most common repair techniques for reinforced concrete structures in coastal areas', in IABSE Conference, Kuala Lumpur 2018: Engineering the Developing World - Report, pp. 370 - 377

Ghodrat M; Samali B, 2018, 'Techno-economic analysis of energy recovery from plastic waste', in Minerals, Metals and Materials Series, pp. 13 - 24, http://dx.doi.org/10.1007/978-3-319-72138-5_2

Ghodrat M; Samali B, 2018, 'Thermodynamic analysis of incineration treatment of waste disposable syringes in an EAF steelmaking process', in Minerals, Metals and Materials Series, pp. 77 - 88, http://dx.doi.org/10.1007/978-3-319-72362-4_7

Rashidi M; Samali B; Zhu X; Azad A; Ghodrat M, 2017, 'Case study: Structural health monitoring of timber bridges using dynamic frequency analysis (DFA)', in SHMII 2017 - 8th International Conference on Structural Health Monitoring of Intelligent Infrastructure, Proceedings, pp. 1262 - 1271

Ghodrat M; Rashidi M; Samali B, 2017, 'Life cycle assessments of incineration treatment for sharp medical waste', pp. 131 - 143, http://dx.doi.org/10.1007/978-3-319-52192-3_14

Rhamdhani MA; Ghodrat M; Brooks G; Masood S; Glen C; Haque N; Reuter M, 2016, 'Evaluation of E-waste processing through secondary copper smelting', in High Temperature Processing Symposium, High Temperature Processing Symposium 2016 Swinburne University of Technology, Swinburne University of Technology, pp. 30 - 31, presented at High Temperature Processing Symposium 2016, Swinburne University of Technology, 01 February 2016 - 02 February 2016

Ghodrat M; Kuang SB; Yu AB; Vince A; Barnett GD; Barnett PJ, 2012, 'CFD Study of the multiphase flow in classifying hydrocyclone: effect of cone geometry', in Proceedings of Ninth International Conference on CFD in the Minerals and Process Industries, CSIRO, Melbourne, Australia, presented at Ninth International Conference on CFD in the Minerals and Process Industries, Melbourne, Australia, 10 December 2012 - 12 December 2012

Lodewijks G; De La Cruz AML; Veeke HPM, 2008, 'Decision support system for RFID', in 6th International Industrial Simulation Conference 2008, ISC 2008, pp. 313 - 316


Back to profile page