By Dr Matthew Joseph Donough

Journal articles

Islam F; Donough MJ; Oromiehie E; Phillips AW; St John NA; Prusty BG, 2025, 'Data-driven optimization of additive composite manufacturing using automated fibre placement: A study on process parameters effects and interactions', Composites Part A: Applied Science and Manufacturing, 190, http://dx.doi.org/10.1016/j.compositesa.2024.108599

Shafaq S; Donough MJ; Bhandari B; Phillips AW; St John NA; Prusty BG, 2025, 'Experimental study on the influence of optimised automated fibre placement processing parameters on the impact response and residual flexural strength of AS4/APC-2 laminates', Composites Science and Technology, 259, http://dx.doi.org/10.1016/j.compscitech.2024.110945

Shafaq S; Donough MJ; Oromiehie E; Islam F; Phillips AW; St John NA; Prusty BG, 2024, 'Parametric process optimisation of automated fibre placement (AFP) based AS4/APC-2 composites for mode I and mode II fracture toughness', Journal of Composite Materials, 58, pp. 2879 - 2895, http://dx.doi.org/10.1177/00219983241283598

Oromiehie E; Nagulapally P; Donough MJ; Prusty BG, 2024, 'Automated manufacture and experimentation of composite overwrapped pressure vessel with embedded optical sensor', International Journal of Hydrogen Energy, 79, pp. 1215 - 1226, http://dx.doi.org/10.1016/j.ijhydene.2024.06.364

Jenkins CJ; Donough MJ; Prusty GB, 2024, 'Design and manufacture of mould-free fibre-reinforced laminates with compound curvature', International Journal of Advanced Manufacturing Technology, 131, pp. 1795 - 1806, http://dx.doi.org/10.1007/s00170-024-13226-2

Jenkins C; Donough MJ; Gangadhara Prusty B, 2024, 'Mould free laminated composites using eccentric fibre prestressing', Composite Structures, 331, http://dx.doi.org/10.1016/j.compstruct.2023.117867

Caldwell RL; Donough MJ; Phillips AW; St John NA; Prusty BG, 2023, 'Dynamic response of composite materials subjected to low velocity impacts in water: A numerical study', Composites Communications, 44, http://dx.doi.org/10.1016/j.coco.2023.101775

Islam F; Donough MJ; Oromiehie E; Phillips AW; St John NA; Prusty BG, 2023, 'Modelling the effect of hot gas torch heating on adjacent tows during automated fibre placement consolidation of thermoplastic composites', Journal of Thermoplastic Composite Materials, 36, pp. 4211 - 4236, http://dx.doi.org/10.1177/08927057221123477

Zhao C; Donough MJ; Prusty BG; Xiao J; Zhou L; An L, 2023, 'Pseudo-ductile fracture in grid stiffened structure by automated fibre placement', Composite Structures, 308, http://dx.doi.org/10.1016/j.compstruct.2023.116694

Shafaq ; Donough MJ; Farnsworth AL; Phillips AW; St John NA; Gangadhara Prusty B, 2023, 'Influence of deposition rates on the mode I fracture toughness of in-situ consolidated thermoplastic composites', Composites Part B: Engineering, 251, http://dx.doi.org/10.1016/j.compositesb.2022.110474

Maung PT; Prusty BG; Donough MJ; Oromiehie E; Phillips AW; St John NA, 2023, 'Automated manufacture of optimised shape-adaptive compsite hydrofoils with curvilinear fibre paths for improved bend-twist performance', Marine Structures, 87, http://dx.doi.org/10.1016/j.marstruc.2022.103327

Donough MJ; Prusty BG; Van Donselaar MJ; Morozov EV; Wang H; Hazell PJ; Philips AW; John NAS, 2023, 'In-Plane and Oblique Edge-on Impact on Thick Glass-Fibre/Epoxy Composite Laminates', International Journal of Impact Engineering, 171, http://dx.doi.org/10.1016/j.ijimpeng.2022.104373

Garg N; Donough MJ; Song C; Phillips AW; Prusty BG, 2023, 'Three-dimensional scaled boundary finite element method to study interfacial imperfections in thick laminated composite plates undergoing bi-axial bending', Engineering Analysis with Boundary Elements, 146, pp. 34 - 43, http://dx.doi.org/10.1016/j.enganabound.2022.10.003

Donough MJ; Shafaq ; St John NA; Philips AW; Gangadhara Prusty B, 2022, 'Process modelling of In-situ consolidated thermoplastic composite by automated fibre placement – A review', Composites Part A: Applied Science and Manufacturing, 163, http://dx.doi.org/10.1016/j.compositesa.2022.107179

Gu Y; Nguyen T; Donough MJ; Gangadhara Prusty B; Wang J, 2022, 'Mechanisms of pop-up delamination in laminated composites pierced by the initial pure waterjet in abrasive waterjet machining', Composite Structures, 297, http://dx.doi.org/10.1016/j.compstruct.2022.115968

Garg N; Saputra A; Donough M; Song C; Phillips AW; Prusty BG, 2022, 'Application of scaled boundary finite element method for three-dimensional modeling of bi-axial bending in thick laminated composite plates', Mechanics of Advanced Materials and Structures, 29, pp. 6935 - 6947, http://dx.doi.org/10.1080/15376494.2021.1989526

Oromiehie E; Gain AK; Donough MJ; Prusty BG, 2022, 'Fracture toughness assessment of CF-PEEK composites consolidated using hot gas torch assisted automated fibre placement', Composite Structures, 279, http://dx.doi.org/10.1016/j.compstruct.2021.114762

Zhao C; Donough MJ; Prusty BG; Xiao J, 2021, 'Influences of ply waviness and discontinuity on automated fibre placement manufactured grid stiffeners', Composite Structures, 256, http://dx.doi.org/10.1016/j.compstruct.2020.113106

Ghazlan A; Ngo T; Tan P; Xie YM; Tran P; Donough M, 2021, 'Inspiration from Nature's body armours – A review of biological and bioinspired composites', Composites Part B: Engineering, 205, http://dx.doi.org/10.1016/j.compositesb.2020.108513

Gargano A; Donough M; Das R; Mouritz AP, 2020, 'Damage to fibre-polymer laminates caused by surface contact explosive charges', Composites Part B: Engineering, 197, http://dx.doi.org/10.1016/j.compositesb.2020.108162

Donough MJ; Gunnion AJ; Orifici AC; Wang CH, 2015, 'Scaling parameter for fatigue delamination growth in composites under varying load ratios', Composites Science and Technology, 120, pp. 39 - 48, http://dx.doi.org/10.1016/j.compscitech.2015.10.011

Donough MJ; Gunnion AJ; Orifici AC; Wang CH, 2015, 'Plasticity induced crack closure in adhesively bonded joints under fatigue loading', International Journal of Fatigue, 70, pp. 440 - 450, http://dx.doi.org/10.1016/j.ijfatigue.2014.07.003

Back to profile page