By Dr Mohammad Saiful Islam

Conference Papers

Islam M; Chang W; Rose F; Wu S; Kinloch A, 2021, 'Toughening fibre composites for the extreme cold in deep space', Melbourne, Australia, presented at 12th International Conference on Structural Integrity and Failure (SIF2021), Melbourne, Australia, 05 December 2021

Tihin G; Wang C-H; Islam M, 2021, 'Use of Nanoparticles to Produce Multiscale Carbon-Epoxy Composite Laminates for Cryogenic Liquid Hydrogen Fuel Tank', Virtual Congress, presented at 10th Australasian Congress on Applied Mechanics (ACAM10), Virtual Congress, 29 November 2021 - 01 December 2021

Islam M; Pearce G; Djukic L; Benninger L; Wang C, 2019, 'Development of multiscale toughening technique to address the micro-cracking problem of composites at cryogenic temperature', in TWENTY-SECOND INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS (ICCM22), Melbourne, Australia, presented at TWENTY-SECOND INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS (ICCM22), Melbourne, Australia, 11 August 2019 - 16 August 2019

Islam MS; Tong L; Falzon PJ, 2012, 'Metal surface profile and residual stress: Persuasion of adhesion', in Metal surface profile and residual stress: Persuasion of adhesion, 22nd Australasian Conference on the Mechanics of Structures and Materials ACMSM 22, Sydney, NSW, Australia, presented at 22nd Australasian Conference on the Mechanics of Structures and Materials ACMSM 22, Sydney, NSW, Australia, 11 December 2012 - 14 December 2012

Islam MS; Pickering KL, 2007, 'Influence of alkali treatment on the interfacial bond strength of industrial hemp fibre reinforced epoxy composites: Effect of variation from the ideal stoicheometric ratio of epoxy resin to curing agent', in Advanced Materials Research, pp. 319 - 322, http://dx.doi.org/10.4028/0-87849-466-9.319

Islam MS; Pickering KL; Beckermann GW, 2005, 'The effect of fibre treatment using alkali on industrial hemp fibre/epoxy resin composites', in Proceedings of the International Conference on Mechanical Engineering …, 6th International Conference on Mechanical Engineering,(ICME2005), Dhaka, Bangladesh, presented at 6th International Conference on Mechanical Engineering,(ICME2005), Dhaka, Bangladesh, 28 December 2005 - 30 December 2005

Back to profile page