ORCID as entered in ROS
https://orcid.org/0000-0002-5727-8332
Select Publications
Conference Papers
, 2024, 'Development and characterisation of ultra-high temperature ceramics (UHTCs) for extreme operating conditions', in 11th Australasian Congress on Applied Mechanics, ACAM 2024, pp. 142 - 158
, 2018, 'Influence of Microstructure on Symmetry Determination of Piezoceramics', in ACTA CRYSTALLOGRAPHICA A-FOUNDATION AND ADVANCES, INT UNION CRYSTALLOGRAPHY, pp. E263 - E263, http://dx.doi.org/10.1107/S2053273318091192
, 2017, 'Effect of Polymer Blending on the Properties of Coal Tars Produced by Pyrolysis', in Zeng Q; Bandyopadhyay S (ed.), Proceedings of iCMEMS Conference 2017, Science, Technology and Management Crest Australia, Sydney, pp. 45 - 50, presented at
, 2017, 'Effects of Codopant (Co + V) Concentration and Distribution on the Photocatalytic Properties of Sol-Gel-Derived TiO2 Thin Films', in Zeng Q; Bandyopadhyay S (ed.), Proceedings of iCMEMS Conference 2017, Science, Technology and Management Crest Australia, Sydney, pp. 51 - 56, presented at
, 2016, 'Photocatalytic Activation of TiO2 Biomaterials by UV and X-Rays', in Advances in Science and Technology, Trans Tech Publications, Perugia Italy, pp. 22 - 30, presented at
, 2015, 'Multimodule System for Wastewater Treatment by Photocatalysis', in Proceedings of the 10th CSM Steel Congress & the 6th Baosteel Biennial Academic Conference, Shanghai, presented at
, 2015, 'High Temperature Characteristics of Coke in Blast Furnaces', in Proceedings of the 10th CSM Steel Congress & the 6th Baosteel Biennial Academic Conference, Shanghai, presented at
, 2015, 'Quantitative X-Ray Diffraction Analysis of Anhydrous and Hydrated Portland Cement - Part 2: Computer-Based Methods', in Advanced Materials Research, Trans Tech Publications, pp. 498 - 503, http://dx.doi.org/10.4028/www.scientific.net/AMR.1087.498
, 2015, 'Quantitative X-Ray Diffraction Analysis of Anhydrous and Hydrated Portland Cement – Part 1: Manual Methods', in Advanced Materials Research, Trans Tech Publications, pp. 493 - 497, http://dx.doi.org/10.4028/www.scientific.net/AMR.1087.493
, 2014, 'Effect of film thickness on the photocatalytic performance of TiO2 thin films deposited by spin coating', in Lin HT; Katoh Y; Matyas J (eds.), Ceramic Engineering and Science Proceedings, American Ceramic Society, FL, Daytona Beach, pp. 51 - 60, presented at
, 2014, 'Anodic Oxidation of Titanium in Mixture of β-Glycerophosphate (β-GP) and Calcium Acetate (CA)', in Key Engineering Materials, Scientific Net, pp. 275 - 280, http://dx.doi.org/10.4028/www.scientific.net/KEM.594-595.275
, 2012, 'Gel Oxidation of Titanium for Biomedical Application', Penang, Malaysia, presented at
, 2012, 'Surface Modification of Titanium Dioxide Thin Films by Manganese Doping', in e-Journal of Surface Science and Nanotechnology, The Surface Science Society of Japan, pp. 103 - 106, http://dx.doi.org/10.1380/ejssnt.2012.103
, 2011, 'Deposition is Nanocrystalline TiO2 Thin Films on Poly(Ethylene Terephthalate) at ¡Ü130¡ãC', in Applied Superconductivity and Electromagnetic Devices, International Conference, 2011. (ASEMD 2011) (CD-ROM), IEEE, Sydney, pp. 1 (arbitrary - CD-ROM) - 4 (arbitrary - CD-ROM), presented at
, 2011, 'Plenary talk - deposition of nanocrystalline TiO<inf>2</inf> thin films on poly(ethylene terephthalate) at ≤130°C', in 2011 International Conference on Applied Superconductivity and Electromagnetic Devices, IEEE, pp. 298 - 299, presented at
, 2011, 'Nanocrystalline TiO2 Thin Films on Poly(Ethylene Terephthalate) at ≤130°C', in Materials Forum Volume 35, Institute of Materials Engineering Australasia Ltd., Melbourne, pp. 95 - 104, presented at
, 2011, 'Well Adhered, Nanocrystalline, Photoactive, TiO2, Thin Films Dip-Coated on Corona-Treated Poly(Ethylene Terephthalate) by Modified Sol-Gel Processing at ~95oC and Drying at ~130oC', in Advances in Synthesis, Processing, and Applications of Nanostructures, John Wiley & Sons, Columbus, OH, pp. 31 - 44, presented at
, 2007, 'Particle size characterisation of tin oxide (SnO2) precipitated by various techniques: Consistency of data', in 3rd International Conference on Recrystallization and Grain Growth (PRIC-6), Jeju Island, Korea, presented at
, 2007, 'Preparation and characterieation of TiO2 thick films fabricated by electrophoretic deposition', in 3rd International Conference on Recrystallization and Grain Growth (PRIC-6), Jeju Island, Korea, presented at
, 2007, 'Preparation and characterisation of TiO2 thick films by gel oxidation', in 3rd International Conference on Recrystallization and Grain Growth (PRIC-6), Jeju Island, Korea, presented at
, 2007, 'Preparation and characterisation of TiO2 thick films fabricated by Electrophoretic Deposition', in 3rd International Conference on Recrystallization and Grain Growth (PRIC-6), Jeju Island, Korea, presented at
, 2007, 'Synthesis of Tin Oxide (SnO2) by the Oxalate Route: Effects of Addition Method and Ageing', in 3rd International Conference on Recrystallization and Grain Growth (PRIC-6), Jeju Island, Korea, presented at
, 2007, 'Synthesis of Tin Oxide (SnO2)by Precipation', in 3rd International Conference on Recrystallization and Grain Growth (PRIC-6), Jeju Island, Korea, presented at
, 2005, 'Prototype of a resistive HTS Fault Current Limiter', in Australasian Universities Power Engineering Conference (AUPEC 2005), Hobart, presented at
, 2005, 'Electrophoretic Deposition of Ceramic Powders', in Journal of Materials Science and Technology, Bulgarian Academy of Sciences, Sofia, Bulgaria, pp. 107 - 110, presented at
, 2002, 'Precision Microwave/Resistance Heating Study of Zirconia: Absence of Microwave Effect', in 3rd World Congress on Microwave and Radio Frequency Applications: Bridging Science, Technology, Sydney, presented at
, 2000, 'Bone bonding to inert and bioactive ceramics', in 6th World Biomaterials Congress, Kamuela, Hawaii USA, pp. 1330 - 1330, presented at
, 2000, 'Surface Electrical Properties of YBa2Cu3Ox During Cooling,', in AUSTCERA 2000, Sydney, pp. 255., presented at
, 1999, 'The enhancement and long-term maintenance of bone formation in porous bioceramics,', in Bacqucy C (ed.), 15th European Conference On Boromaterials Archachon, Palais des Congre of Arcachon, Bordeoux, France, pp. 9 - 9, presented at
, 1999, 'Advanced net-forming techniques for ceramic and metal matrix composites,', in ACUN-1 Composites: innovations and structural applications, University of New South Wales, pp. 60 - 63, presented at
, 1999, 'Mechanical testing of electrophoretically deposited hydroxyapatite,', in 12th International Symposium on Ceramics in Medicine, Nara, Japan, pp. 463 - 466, presented at
, 1999, 'Grain boundary transport in Zirconia,', in Journal of Intern Ceramic Conference PACRIM-2, presented at
, 1999, 'Surface Dynamics of Zirconia at room temperature,', in Journal of Intern Ceramic Conference PACRIM-2, presented at
, 1999, 'Work function of Zirconiaa at elevated temperatures,', in Journal of Intern Ceramic Conference PACRIM-2, presented at
, 1998, 'High temperature kelvin probe. A tool for `In Situ` surface monitoring', in Kim BI (ed.), 98 International symposium of RCAPAM, Sunchon, Korea, pp. 51 - 61, presented at
, 1997, 'Microstructural aspects of toughened ceramics for high temperature service', in 6th Asia-Pacific Conference on Electron Microscopy, Hong Kong, pp. 139 - 140, presented at
, 1996, 'A high-resolution microscopy study of the effects of calcination on the morphology of Hap powders', in 2nd International Meeting of Pacific Rim Ceramic Society Symposium 96, Queensland, presented at
, 1996, 'Application of the SIMS method in the determination of bulk, dislocation and grain boundary diffusion in Y-stabilized zirconia', in 2nd International Meeting of Pacific Rim Ceramic Society Symposium 96, Queensland, presented at
, 1996, 'Biocompatibility study of partially stabilized zirconia ceramics', in 2nd International Meeting of Pacific Rim Ceramic Society Symposium 96, Queensland, presented at
, 1996, 'Constant heating rate hot-pressing of titanate ceramics', in 2nd International Meeting of Pacific Rim Ceramic Society Symposium 96, Queensland, presented at
, 1996, 'Effect of processing variables on pressureless sintering of silicon carbide platelet reinforced alumina', in 2nd International Meeting of Pacific Rim Ceramic Society Symposium 96, Queensland, presented at
, 1996, 'Fracture toughness of fibre-reinforced hydroxyapatite using a miniaturised compact tension test', in 2nd International Meeting of Pacific Rim Ceramic Society Symposium 96, Queensland, presented at
, 1996, 'Glass formation and crystallisation in the system Nd2O3-Al2O3-SiO2', in 2nd International Meeting of Pacific Rim Ceramic Society Symposium 96, Queensland, presented at
, 1996, 'Hydroxyapatite coatings by electrophoretic deposition: effect of particle size and morphology', in 2nd International Meeting of Pacific Rim Ceramic Society Symposium 96, Queensland, presented at
, 1996, 'Long-term aging of tetragonal zirconia polycrystal(TZP) ceramic in simulated physiological solutions', in 2nd International Meeting of Pacific Rim Ceramic Society Symposium 96, Queensland, presented at
, 1996, 'Microwave heating of hydroxyapatite fibre composites: effect on the additive-induced decomposition phenomenon', in 2nd International Meeting of Pacific Rim Ceramic Society Symposium 96, Queensland, presented at
, 1996, 'Preparation of Hydroxyapatite fibre composites by hot isostatic pressing', in 2nd International Meeting of Pacific Rim Ceramic Society Symposium 96, Queensland, presented at
, 1996, 'Silica films prepared by electrophoretic deposition of spherical nanoparticles', in 2nd International Meeting of Pacific Rim Ceramic Society Symposium 96, Queensland, presented at
, 1996, 'Study of bone ingrowth into porous bioinert ceramics', in 2nd International Meeting of Pacific Rim Ceramic Society Symposium 96, Queensland, presented at
, 1996, 'Surface dynamics of Zirconia at room temperature', in 2nd International Meeting of Pacific Rim Ceramic Society Symposium 96, Queensland, presented at
Filter by type
https://orcid.org/0000-0002-5727-8332